代码拉取完成,页面将自动刷新
同步操作将从 海石生风/ha102m 强制同步,此操作会覆盖自 Fork 仓库以来所做的任何修改,且无法恢复!!!
确定后同步将在后台操作,完成时将刷新页面,请耐心等待。
/**
******************************************************************************
* @file Project/STM8L15x_StdPeriph_Template/stm8l15x_it.h
* @author MCD Application Team
* @version V1.6.1
* @date 30-September-2014
* @brief This file contains the headers of the interrupt handlers.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM8L15x_IT_H
#define __STM8L15x_IT_H
/* Includes ------------------------------------------------------------------*/
#include "stm8l15x.h"
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
#ifdef _COSMIC_
void _stext(void); /* RESET startup routine */
INTERRUPT void NonHandledInterrupt(void);
#endif /* _COSMIC_ */
#if ! defined(_RAISONANCE_) && ! defined(_SDCC_)
INTERRUPT void TRAP_IRQHandler(void); /* TRAP */
INTERRUPT void FLASH_IRQHandler(void); /* FLASH EOP/PG_DIS */
INTERRUPT void DMA1_CHANNEL0_1_IRQHandler(void); /* DMA1 Channel0/1*/
INTERRUPT void DMA1_CHANNEL2_3_IRQHandler(void); /*DMA1 Channel2/3*/
INTERRUPT void RTC_CSSLSE_IRQHandler(void); /* RTC /CSS_LSE */
INTERRUPT void EXTIE_F_PVD_IRQHandler(void); /*EXTI PORTE/EXTI PORTF/PVD*/
INTERRUPT void EXTIB_G_IRQHandler(void); /* EXTI PORTB / EXTI PORTG */
INTERRUPT void EXTID_H_IRQHandler(void); /* EXTI PORTD / EXTI PORTH*/
INTERRUPT void EXTI0_IRQHandler(void); /* EXTI PIN0 */
INTERRUPT void EXTI1_IRQHandler(void); /* EXTI PIN1 */
INTERRUPT void EXTI2_IRQHandler(void); /* EXTI PIN2 */
INTERRUPT void EXTI3_IRQHandler(void); /* EXTI PIN3 */
INTERRUPT void EXTI4_IRQHandler(void); /* EXTI PIN4 */
INTERRUPT void EXTI5_IRQHandler(void); /* EXTI PIN5 */
INTERRUPT void EXTI6_IRQHandler(void); /* EXTI PIN6 */
INTERRUPT void EXTI7_IRQHandler(void); /* EXTI PIN7 */
INTERRUPT void LCD_AES_IRQHandler(void); /* LCD /AES */
INTERRUPT void SWITCH_CSS_BREAK_DAC_IRQHandler(void); /* Switch CLK/CSS/TIM1 Break/DAC */
INTERRUPT void ADC1_COMP_IRQHandler(void); /*ADC1/COMP*/
INTERRUPT void TIM2_UPD_OVF_TRG_BRK_USART2_TX_IRQHandler(void); /* TIM2 UPD/OVF/TRG/BRK / USART2 TX */
INTERRUPT void TIM2_CC_USART2_RX_IRQHandler(void); /* TIM2 CAP / USART2 RX */
INTERRUPT void TIM3_UPD_OVF_TRG_BRK_USART3_TX_IRQHandler(void); /* TIM3 UPD/OVF/TRG/BRK /USART3 TX*/
INTERRUPT void TIM3_CC_USART3_RX_IRQHandler(void); /* TIM3 CAP/ USART3 RX */
INTERRUPT void TIM1_UPD_OVF_TRG_COM_IRQHandler(void);/* TIM1 UPD/OVF/TRG/COM */
INTERRUPT void TIM1_CC_IRQHandler(void);/* TIM1 CAP*/
INTERRUPT void TIM4_UPD_OVF_TRG_IRQHandler(void); /* TIM4 UPD/OVF/TRI */
INTERRUPT void SPI1_IRQHandler(void); /* SPI1 */
INTERRUPT void USART1_TX_TIM5_UPD_OVF_TRG_BRK_IRQHandler(void); /* USART1 TX / TIM5 UPD/OVF/TRG/BRK */
INTERRUPT void USART1_RX_TIM5_CC_IRQHandler(void); /* USART1 RX / TIM5 CAP */
INTERRUPT void I2C1_SPI2_IRQHandler(void); /* I2C1 / SPI2 */
#endif /* _RAISONANCE_ */
#endif /* __STM8L15x_IT_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。