grub2
/
grub2-s390x-09-improve-zipl-setup.patch

---
 util/s390x/zipl2grub.conf.in |   30 +++++++++++++++++++-
 util/s390x/zipl2grub.pl.in   |   64 +++++++++++++++++++++++++++++--------------
 2 files changed, 73 insertions(+), 21 deletions(-)

--- a/util/s390x/zipl2grub.conf.in
+++ b/util/s390x/zipl2grub.conf.in
@@ -10,17 +10,45 @@ defaultmenu = menu
     image = @zipldir@/image
     parameters = "root=@GRUB_DEVICE@ @GRUB_EMU_CONMODE@ @GRUB_CMDLINE_LINUX@ @GRUB_CMDLINE_LINUX_DEFAULT@ initgrub quiet splash=silent plymouth.enable=0 "

+[grub2-mem1G]
+    target = @zipldir@
+    image  = @zipldir@/image
+    ramdisk = @zipldir@/initrd,0x2000000
+    parameters = "root=@GRUB_DEVICE@ @GRUB_EMU_CONMODE@ @GRUB_CMDLINE_LINUX@ @GRUB_CMDLINE_LINUX_DEFAULT@ initgrub quiet splash=silent plymouth.enable=0 mem=1G "
+
 [skip-grub2]
     target = @zipldir@
     ramdisk = @zipldir@/initrd,0x2000000
     image = @zipldir@/image
     parameters = "root=@GRUB_DEVICE@ @GRUB_CONMODE@ @GRUB_CMDLINE_LINUX@ @GRUB_CMDLINE_LINUX_DEFAULT@ "
+#@
+#@[grub2-previous]
+#@    target = @zipldir@
+#@    image  = @zipldir@/image.prev
+#@    ramdisk = @zipldir@/initrd.prev,0x2000000
+#@    parameters = "root=@GRUB_DEVICE@ @GRUB_EMU_CONMODE@ @GRUB_CMDLINE_LINUX@ @GRUB_CMDLINE_LINUX_DEFAULT@ initgrub quiet splash=silent plymouth.enable=0 "
+#@
+#@[grub2-mem1G-previous]
+#@    target = @zipldir@
+#@    image  = @zipldir@/image.prev
+#@    ramdisk = @zipldir@/initrd.prev,0x2000000
+#@    parameters = "root=@GRUB_DEVICE@ @GRUB_EMU_CONMODE@ @GRUB_CMDLINE_LINUX@ @GRUB_CMDLINE_LINUX_DEFAULT@ initgrub quiet splash=silent plymouth.enable=0 mem=1G "
+#@
+#@[skip-grub2-previous]
+#@    target = @zipldir@
+#@    image  = @zipldir@/image.prev
+#@    ramdisk = @zipldir@/initrd.prev,0x2000000
+#@    parameters = "root=@GRUB_DEVICE@ @GRUB_CONMODE@ @GRUB_CMDLINE_LINUX@ @GRUB_CMDLINE_LINUX_DEFAULT@ "

 :menu
     target = @zipldir@
-    timeout = 16
+    timeout = 60
     default = 1
     prompt = 0
     1 = grub2
     2 = skip-grub2
+    3 = grub2-mem1G
+#@    4 = grub2-previous
+#@    5 = skip-grub2-previous
+#@    6 = grub2-mem1G-previous

--- a/util/s390x/zipl2grub.pl.in
+++ b/util/s390x/zipl2grub.pl.in
@@ -10,6 +10,7 @@ my $sysconfbl = '@sysconfdir@/sysconfig/
 my $defimage = "/boot/image";
 my $definitrd = "/boot/initrd";
 my $Image = "$defimage";
+my $previous = ".prev";
 my $zipldir = "";
 my $running = "";
 my $refresh = 1; # needs to default to "on" until most bugs are shaken out!
@@ -44,12 +45,12 @@ sub System(@) {
   return 0 if ($debug);
   system( @C);
   if ($? == -1) {
-    Panic( $?, "$C[0]: Failed to execute: $!\n");
+    Panic( 1, "$C[0]: Failed to execute: $!\n");
   } elsif ($? & 127) {
-    Panic( $?, sprintf( "$C[0]: Died with signal %d with%s coredump\n",
+    Panic( 1, sprintf( "$C[0]: Died with signal %d with%s coredump\n",
            ($? & 127),  ($? & 128) ? '' : 'out'));
   } elsif ( $? >> 8 != 0 ) {
-    Panic( $?, "$C[0]: Failed\n");
+    Panic( $? >> 8, "$C[0]: Failed\n");
   }
   return( 0);
 }
@@ -74,11 +75,13 @@ sub ln($$) {
   unlink( $_[1]) || Panic( 1, "$C: unlink: $!.\n") if ( -e $_[1]);
   symlink($_[0], $_[1]) || Panic( 1, "$C: symlink: $!.\n");
 }
-sub BootCopy($$$) {
+
+sub ManagePrev($$$){
   my( $file, $dir, $tgt) = @_;
   my $curr = "$dir/$tgt";
-  my $prev = "$dir/$tgt.prev";
-  Info(4, "Copy /boot/$file $dir $tgt\n");
+  my $prev = "$dir/$tgt$previous";
+  my $ret = 0;
+  Info(2, "Manage $prev\n");
   if ( -l $curr ) {
     my $curf = readlink( $curr);
     if ( $curf ne $file ) {
@@ -88,7 +91,21 @@ sub BootCopy($$$) {
 	rm( $pref);
       }
       mv( $curr, $prev);
+      $ret = 1;
+    } else {
+      Info(2, "  nothing to do ($curr -> $file).\n");
     }
+  } else {
+    Info(2, "  nothing to do ($curr no sym-link).\n");
+  }
+  return $ret;
+}
+sub BootCopy($$$) {
+  my( $file, $dir, $tgt) = @_;
+  my $curr = "$dir/$tgt";
+  Info(4, "Copy /boot/$file $dir $tgt\n");
+  if ( $tgt eq "image" && ManagePrev( $file, $dir, $tgt)) {
+    ManagePrev( $file, $dir, "initrd")
   }
   cp( "/boot/$file", "$dir/$file");
   ln( $file, $curr);
@@ -163,7 +180,9 @@ sub Usage($) {
 	"zIPL directory missing.",
 	"Configuration template missing.",
 	"Configuration template unreadable.",
-	"zIPL directory not accesible.",
+	"zIPL directory not accessible.",
+	"kernel image parameter missing.",
+	"kernel image unreadable.",
 	""
   );
   my $msg = "";
@@ -186,7 +205,8 @@ while ( $#ARGV >= 0 ) {
   (/^--?help/ || /^-h/)       && (Usage(0));
   (/^--zipldir$/ || /^-z$/)   && ($zipldir = shift || Usage(2), next);
   (/^--template$/ || /^-T$/)  && ($in = shift || Usage(3), next);
-  (/^--image$/ || /^-i$/)     && ($Image = shift || Usage(5), $force = 1, next);
+  (/^--image$/ || /^-i$/)     && ($Image = shift || Usage(6),
+				  -r "$Image" || Usage(7), $force = 1, next);
   (/^-/)                      && (Usage(1));
   Usage(1);
 }
@@ -345,7 +365,7 @@ if ( $debug && $verbose > 2 ) {
 open( IN, "< $in") ||
    Panic( 1, "$C: Failed to open 'zipl.conf' template: $!.\n");
 while ( <IN> ) {
-  Info( 3, "$.. <$_$.. >");
+  Info( 4, "$.. <$_$.. >");
   if ( $. == 1 && m{^## This} ) {
     $_ = "## This file was written by 'grub2-install/$C'\n" .
 	 "## filling '$in' as template\n";
@@ -366,7 +386,7 @@ while ( <IN> ) {
     }
     s{\@$k\@}{$v}g;
   }
-  Info( 2, $_);
+  Info( 3, $_);
   $cfg .= $_;
 }
 if ( $miss ) {
@@ -374,13 +394,6 @@ if ( $miss ) {
   Panic( 1, "$C: 'zipl.conf' template could not be filled. \n");
 }

-my $ziplconf = "$zipldir/config";
-if ( ! $debug ) {
-  open( OUT, "> $ziplconf") || die;
-  print( OUT $cfg) || die;
-  close( OUT);
-}
-
 # copy out kernel and initrd
 my $ziplimage = "$zipldir/image";
 my $ziplinitrd = "$zipldir/initrd";
@@ -399,15 +412,15 @@ if ( -l $Image ) {
   $Image = readlink( $Image);
 }
 my ($image, $version) = ($Image =~ m{^(?:/boot/)?([^-]+-(.+))$});
-my $initrd = "initrd-$version";
-
 if ( !defined($image) || !defined($version) || ! -r "/boot/$image" ) {
   Panic( 1, "$C: weird $Image. This should never happen!\n");
 }
+my $initrd = "initrd-$version";

 if ( ! -r $ziplimage || ! -r $ziplinitrd || $refresh ) {
   BootCopy( $image, $zipldir, "image");
-  BootCopy( $initrd, $zipldir, "initrd") if (-r "/boot/$initrd");
+  BootCopy( $initrd, $zipldir, "initrd")
+    if (-r "/boot/$initrd" && ! exists( $fsdev{"/boot"}));
 }
 if ( $refresh || ChkInitrd( $zipldir, "initrd") <= 0 ) {
   MkInitrd( $initrd, $zipldir, $version);
@@ -417,6 +430,17 @@ if ( ChkInitrd( $zipldir, "initrd") == 0
   $miss++;
 }

+# write zipl config file
+my $ziplconf = "$zipldir/config";
+$cfg =~ s{#@}{}g if ( -r "$ziplimage$previous"  && -r "$ziplinitrd$previous" );
+if ( ! $debug ) {
+  open( OUT, "> $ziplconf") || die;
+  print( OUT $cfg) || die;
+  close( OUT);
+} else {
+  print( STDERR $cfg);
+}
+
 # now: go for it!
 my @C = ( "/sbin/zipl", (($verbose) ? "-Vnc" : "-nc"), "$ziplconf" );
 System( @C);