README.md · Vladislav Ivanishin/arkcompiler_runtime_core

# Bootstrapping

Currently an officially supported host OS for development, building and testing is Ubuntu 18.04 and Ubuntu 20.04.
The full list of packages required for building and testing the project is specified in
`scripts/deps-lists` files. These packages can be installed either manually or by running
a bootstrap script:

```
$ sudo ./scripts/install-deps-ubuntu
```

For more bootstrapping options, run

```
$ sudo ./scripts/install-deps-ubuntu --help
```

E.g. for development purposes you should run:

```
$ sudo ./scripts/install-deps-ubuntu -i=dev
```

# Third party

Panda uses third party libraries. For install the libraries and apply patches run:

```
$ ./scripts/install-third-party --force-clone
```

# Building

Assuming your system is bootstrapped, please run following commands:

```
$ mkdir panda-build
$ cd panda-build
$ cmake /path/to/panda/repository
$ make -j
```

This will build Panda in debug mode with your default C++ compiler. All supported compilers can be
found in `cmake/toolchain`. E.g., to build with Clang 14, pass a path to the corresponding toolchain
file during configuration:

```
$ cmake -DCMAKE_TOOLCHAIN_FILE=/path/to/panda/repository/cmake/toolchain/host_clang_14.cmake /path/to/panda/repository
```

## Explicitly setting build types

Recommended way to build Panda is to set `CMAKE_BUILD_TYPE` variable explicitly during configurations. Supported values are:

| Mode         | Assertions | Optimizations         | Debug info           |
| ----         | ---------- | -------------         | ----------           |
| `Debug `     | Yes        | None (CMake default)  | `-g` (CMake default) |
| `Release`    | No         | `-O3` (CMake default) | None (CMake default) |
| `FastVerify` | Yes        | `-O2`                 | `-ggdb3`             |

Notes:

* Other common modes (`RelWithDebInfo`, `MinSizeRel`, `DebugDetailed`) should work, but they are not tested in CI.
* Unlike `RelWithDebInfo`, `FastVerify` preserves assertions (and provides very verbose debug information).
  Use this build type for running heavy test suites when you want both fast-running code and debuggability.
* `DebugDetailed` gives more debug information than `Debug`, it can be usefull for debugging unit tests for example.

Example:

```
$ cmake -DCMAKE_BUILD_TYPE=Release ...
```

## Running tests with QEMU for cross-compiled aarch64/arm builds

Recommended QEMU version for running testst is 6.2.0 (but 5.1+ should be ok, too). By default, it is downloaded and installed during environment bootstrap. Any system-installed package is left intact. If recommened QEMU version is not accessible via $PATH, it can be specified during configuration time:

```
# If QEMU is available as /opt/qemu-6.2.0/bin/qemu-aarch64
$ cmake -DQEMU_PREFIX=/opt/qemu-6.2.0 ...
```

## Building with GN

1. Getting GN binary

```
$ git clone https://gn.googlesource.com/gn
$ cd gn
$ python build/gen.py
$ ninja -C out
```

2. Build panda using gn (`ark_asm`, `ark_disasm`, `ark_aot`, `c2abc` and `ark` targets are supported)

```
$ cd /path/to/panda/repository
$ /path/to/gn/repository/out/gn gen out
$ ninja -C out ark
```

## Further reading

* For more details, please see [build system readme](cmake/README.md).

# Testing

For testing, the following umbrella targets which guarantee building prior to running may be used:

* `tests`, for running all testing suites.
* `tests_full`, for running all testing suites and various code linters.

# Test coverage

In order to measure bytecode optimizer coverage configure your build with -DENABLE_BYTECODE_OPTIMIZER_COVERAGE=true. Then run
```
$ ninja bytecode_optimizer_coverage
```

# Benchmarking

To build and run benchmarks, please use the umbrella target `benchmarks` or any of its
dependencies. Please see the root `CMakeLists.txt` for more details.

NB! Make sure that you configure your build with `-DCMAKE_BUILD_TYPE=Release`, otherwise
your run will most likely be dead slow.

# Running

## Running assembler

Assuming that you are in `panda-build` directory, please run:

```
$ ./bin/ark_asm /path/to/panda-assembly.pa /path/to/binary/output.abc
```

## Running interpreter

Assuming that your main function is defined as `.function main(...)` in the assembly listing,
and `/path/to/binary/output.abc` is the result of the assembler, please run:

```
$ ./bin/ark /path/to/binary/output.abc _GLOBAL::main
```

Vladislav Ivanishin/arkcompiler_runtime_core

简介

发行版

贡献者

近期动态

Vladislav Ivanishin/arkcompiler_runtime_core .gitee-modal { width: 500px !important; }

简介

发行版

贡献者

近期动态

搜索帮助

Vladislav Ivanishin/arkcompiler_runtime_core