# Override some defaults in application project.

#
# Serial flasher config
#
CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
CONFIG_ESPTOOLPY_BAUD_921600B=y

#
# Partition Table
#
CONFIG_PARTITION_TABLE_OFFSET=0xc000
CONFIG_PARTITION_TABLE_CUSTOM=y
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"


CONFIG_COMPILER_OPTIMIZATION_PERF=y


#
# ESP32-specific
#
CONFIG_ESP32_ENABLE_COREDUMP=y
CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH=y
CONFIG_ESP32_DEFAULT_CPU_FREQ_240=y
CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=240



#
# ESP32-specific
#
CONFIG_MEMMAP_SMP=y
CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=4096

CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=16
CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=64
CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=64
CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
CONFIG_ESP32_WIFI_TX_BA_WIN=32
CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
CONFIG_ESP32_WIFI_RX_BA_WIN=32

CONFIG_FREERTOS_UNICORE=n
CONFIG_FREERTOS_HZ=1000

CONFIG_ESP_INT_WDT=n
CONFIG_ESP_TASK_WDT=n

CONFIG_LWIP_TCP_SND_BUF_DEFAULT=65534
CONFIG_LWIP_TCP_WND_DEFAULT=65534
CONFIG_LWIP_TCP_RECVMBOX_SIZE=64
CONFIG_LWIP_UDP_RECVMBOX_SIZE=64
CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=64
CONFIG_LWIP_ETHARP_TRUST_IP_MAC=n
CONFIG_LWIP_IRAM_OPTIMIZATION=y

CONFIG_LWIP_L2_TO_L3_COPY=y
CONFIG_LWIP_IP_FORWARD=y
CONFIG_LWIP_IPV4_NAPT=y
CONFIG_LWIP_TCP_MSS=1460
CONFIG_LWIP_TCP_OVERSIZE_MSS=y





CONFIG_EXAMPLE_ETH_PHY_LAN8720=y
CONFIG_ETH_RMII_CLK_OUTPUT=y


# Override some defaults to enable PPP
CONFIG_LWIP_PPP_SUPPORT=y
CONFIG_LWIP_PPP_PAP_SUPPORT=y
CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=4096
# Do not enable IPV6 in dte<->dce link local
CONFIG_LWIP_PPP_ENABLE_IPV6=n
# Disable legacy API
CONFIG_MODEM_LEGACY_API=n
# Enable NAPT
CONFIG_LWIP_IP_FORWARD=y
CONFIG_LWIP_IPV4_NAPT=y





# Override some defaults so BT stack is enabled
# by default in this example
CONFIG_BT_ENABLED=y
CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=n
CONFIG_BTDM_CTRL_MODE_BTDM=n
CONFIG_BTDM_MODEM_SLEEP=n
CONFIG_BTDM_SCAN_DUPL_TYPE_DATA_DEVICE=y
CONFIG_BTDM_BLE_MESH_SCAN_DUPL_EN=y
CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MANUAL=y
CONFIG_BT_BTU_TASK_STACK_SIZE=4512

# Override some defaults of ESP BLE Mesh
CONFIG_BLE_MESH=y
CONFIG_BLE_MESH_NODE=y
CONFIG_BLE_MESH_PB_GATT=y
CONFIG_BLE_MESH_TX_SEG_MSG_COUNT=10
CONFIG_BLE_MESH_RX_SEG_MSG_COUNT=10
CONFIG_BLE_MESH_SETTINGS=y
CONFIG_BLE_MESH_SUBNET_COUNT=5
CONFIG_BLE_MESH_APP_KEY_COUNT=5
CONFIG_BLE_MESH_MODEL_KEY_COUNT=5
CONFIG_BLE_MESH_MODEL_GROUP_COUNT=5
CONFIG_BLE_MESH_MSG_CACHE_SIZE=20
CONFIG_BLE_MESH_ADV_BUF_COUNT=256

CONFIG_ETH_DMA_BUFFER_SIZE=1600


#
# AliGenie Triples Configuration
#
CONFIG_TRIPLES_PRODUCT_ID=6930088
CONFIG_TRIPLES_DEVICE_NAME="18146c417c53"
CONFIG_TRIPLES_DEVICE_SECRET="c85129c4ecdcc383f1455f757a696a73"
# end of AliGenie Triples Configuration