/* 电脑远程开机卡V1.1
 * 2020.2.11创建项目
 * 最后修改时间2020.3.16
 * 作者：梦程MI  Bilibili uid：88809897
 * 使用平台： Blinker & Aruino
 * ESP8266开发板 2.6.3
 * pwr信号-D5-GPIO14
 * rst信号-D7-GPIO13
 * 本项目开源 遵循AGPL3.0规则 所有基于本项目开发必须开源。
 * 未经 梦程MI 许可，禁止用作商业用途。
 * 本项目软硬件均由 梦程MI 独立制作，请尊重版权。
 * 本项目适合有一定基础的开发者编译制作，没有arduino基础的请学习完arduino后在进行实践操作。
 */
#define BLINKER_WIFI
#define BLINKER_MIOT_MULTI_OUTLET    //设置为小爱多插座模式
#define BLINKER_ESP_SMARTCONFIG

#include <Blinker.h>

const int pwr = D5;       //D5-PWR信号
const int rst = D7;       //D7-RST信号

//---------------定义初始信息--------------
char auth[] = "61350ce06d5e"; //Your Device Secret Key
//---------------------------------------

bool oState[3] = { false };    //设置3路开关控制

BlinkerButton Button1("PWR");    
BlinkerButton Button2("RST");   
BlinkerButton Button3("QPWR"); 

//---------------Smartconfig---------------
void dataRead(const String & data)
{
    BLINKER_LOG("Blinker readString: ", data);

    Blinker.vibrate();
    
    uint32_t BlinkerTime = millis();
    
    Blinker.print("millis", BlinkerTime);
}

//----------------按钮PWR----------------------
void button1_callback(const String & state)    
{
    BLINKER_LOG("get button state: ", state);
    digitalWrite(pwr, HIGH);
    Blinker.delay(200);
    digitalWrite(pwr, LOW);
    Button1.print("tap");

        
}
//-----------按钮RST------------------------ 
void button2_callback(const String & state)     
{
    BLINKER_LOG("get button state: ", state);
    digitalWrite(rst, HIGH);
    Blinker.delay(200);
    digitalWrite(rst, LOW);
    Button2.print("tap");

}
//-------（V1.1新增）强制关机【长按关机键】--------- 
void button3_callback(const String & state)     
{
    BLINKER_LOG("get button state: ", state);
    digitalWrite(pwr, HIGH);
    Blinker.delay(5000);
    digitalWrite(pwr, LOW);
    Button3.print("tap");

}

//------------小爱控制---------------------------
void miotPowerState(const String & state, uint8_t num) {   //小爱同学控制指令  
   BLINKER_LOG("need set outlet: ", num, ", power state: ", state);   
   
   if(num==1){
    if(state == BLINKER_CMD_ON){
        digitalWrite(pwr, HIGH);      
        Blinker.delay(200);         
        digitalWrite(pwr, LOW);
 
        BlinkerMIOT.powerState("on", num);
        BlinkerMIOT.print();
        } 
        if (state == BLINKER_CMD_OFF){
          digitalWrite(pwr, HIGH);      
          Blinker.delay(200);         
          digitalWrite(pwr, LOW);
 
          BlinkerMIOT.powerState("off", num);
          BlinkerMIOT.print();
          }     
   }
   else if(num==2){
    if(state == BLINKER_CMD_ON){
        digitalWrite(rst, HIGH);      
        Blinker.delay(200);         
        digitalWrite(rst, LOW);
 
        BlinkerMIOT.powerState("on", num);
        BlinkerMIOT.print();
        } 
        if (state == BLINKER_CMD_OFF){
          digitalWrite(rst, HIGH);      
          Blinker.delay(200);         
          digitalWrite(rst, LOW);
 
          BlinkerMIOT.powerState("off", num);
          BlinkerMIOT.print();
          }     
   }

   else if(num==3){
    if(state == BLINKER_CMD_ON){
        digitalWrite(pwr, HIGH);      
        Blinker.delay(5000);         
        digitalWrite(pwr, LOW);
 
        BlinkerMIOT.powerState("on", num);
        BlinkerMIOT.print();
        } 
        if (state == BLINKER_CMD_OFF){
          digitalWrite(pwr, HIGH);      
          Blinker.delay(5000);         
          digitalWrite(pwr, LOW);
 
          BlinkerMIOT.powerState("off", num);
          BlinkerMIOT.print();
          }     
   }
 
    oState[num] = false;
 
   if (num == 0){
    for (uint8_t o_num = 0; o_num < 5; o_num++){
      oState[o_num] = false;
      }
   }
}

 
void miotQuery(int32_t queryCode, uint8_t num)
{
    BLINKER_LOG("AliGenie Query outlet: ", num,", codes: ", queryCode);
 
    switch (queryCode)
    {
        case BLINKER_CMD_QUERY_ALL_NUMBER :
            BLINKER_LOG("MIOT Query All");
            BlinkerMIOT.powerState(oState[num] ? "on" : "off", num);
            BlinkerMIOT.print();
            break;
        case BLINKER_CMD_QUERY_POWERSTATE_NUMBER :
            BLINKER_LOG("MIOT Query Power State");
            BlinkerMIOT.powerState(oState[num] ? "on" : "off", num);
            BlinkerMIOT.print();
            break;
        default :
            BlinkerMIOT.powerState(oState[num] ? "on" : "off", num);
            BlinkerMIOT.print();
            break;
    }
}
 
 
void setup()
{
    //开启blinker 若不出错此命令可以不执行
    Blinker.deleteTimer();
    
    // 初始化串口
    Serial.begin(115200);
    
    //开启DEBUG（监视器可以查看）
    BLINKER_DEBUG.stream(Serial);
   
    // 初始化IO
    pinMode(pwr, OUTPUT);
    pinMode(rst, OUTPUT);
    
    //默认写入低电平
    digitalWrite(pwr, LOW);
    digitalWrite(rst, LOW);
    
    // 初始化blinker
    Blinker.begin(auth);
    Blinker.attachData(dataRead);

    //回调小爱
    BlinkerMIOT.attachPowerState(miotPowerState);
    BlinkerMIOT.attachQuery(miotQuery);

    //注册回调函数(点灯app内)
    Button1.attach(button1_callback); 
    Button2.attach(button2_callback); 
    Button3.attach(button3_callback); 
}
 
void loop()
{
    Blinker.run();
}