代码拉取完成，页面将自动刷新
# -*- mode: sh; sh-indentation: 4; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# Copyright (c) 2016-2020 Sebastian Gniazdowski and contributors.
builtin source "${ZINIT[BIN_DIR]}/zinit-side.zsh" || { builtin print -P "${ZINIT[col-error]}ERROR:%f%b Couldn't find ${ZINIT[col-obj]}zinit-side.zsh%f%b."; return 1; }
ZINIT[EXTENDED_GLOB]=""
#
# Backend, low level functions
#
# FUNCTION: .zinit-unregister-plugin [[[
# Removes the plugin from ZINIT_REGISTERED_PLUGINS array and from the
# zsh_loaded_plugins array (managed according to the plugin standard)
.zinit-unregister-plugin() {
.zinit-any-to-user-plugin "$1" "$2"
local uspl2="${reply[-2]}${${reply[-2]:#(%|/)*}:+/}${reply[-1]}" \
teleid="$3"
# If not found, the index will be length+1
ZINIT_REGISTERED_PLUGINS[${ZINIT_REGISTERED_PLUGINS[(i)$uspl2]}]=()
# Support Zsh plugin standard
zsh_loaded_plugins[${zsh_loaded_plugins[(i)$teleid]}]=()
ZINIT[STATES__$uspl2]="0"
} # ]]]
# FUNCTION: .zinit-diff-functions-compute [[[
# Computes FUNCTIONS that holds new functions added by plugin.
# Uses data gathered earlier by .zinit-diff-functions().
#
# $1 - user/plugin
.zinit-diff-functions-compute() {
local uspl2="$1"
# Cannot run diff if *_BEFORE or *_AFTER variable is not set
# Following is paranoid for *_BEFORE and *_AFTER being only spaces
builtin setopt localoptions extendedglob nokshglob noksharrays
[[ "${ZINIT[FUNCTIONS_BEFORE__$uspl2]}" != *[$'! \t']* || "${ZINIT[FUNCTIONS_AFTER__$uspl2]}" != *[$'! \t']* ]] && return 1
typeset -A func
local i
# This includes new functions. Quoting is kept (i.e. no i=${(Q)i})
for i in "${(z)ZINIT[FUNCTIONS_AFTER__$uspl2]}"; do
func[$i]=1
done
# Remove duplicated entries, i.e. existing before. Quoting is kept
for i in "${(z)ZINIT[FUNCTIONS_BEFORE__$uspl2]}"; do
# if would do unset, then: func[opp+a\[]: invalid parameter name
func[$i]=0
done
# Store the functions, associating them with plugin ($uspl2)
ZINIT[FUNCTIONS__$uspl2]=""
for i in "${(onk)func[@]}"; do
[[ "${func[$i]}" = "1" ]] && ZINIT[FUNCTIONS__$uspl2]+="$i "
done
return 0
} # ]]]
# FUNCTION: .zinit-diff-options-compute [[[
# Computes OPTIONS that holds options changed by plugin.
# Uses data gathered earlier by .zinit-diff-options().
#
# $1 - user/plugin
.zinit-diff-options-compute() {
local uspl2="$1"
# Cannot run diff if *_BEFORE or *_AFTER variable is not set
# Following is paranoid for *_BEFORE and *_AFTER being only spaces
builtin setopt localoptions extendedglob nokshglob noksharrays
[[ "${ZINIT[OPTIONS_BEFORE__$uspl2]}" != *[$'! \t']* || "${ZINIT[OPTIONS_AFTER__$uspl2]}" != *[$'! \t']* ]] && return 1
typeset -A opts_before opts_after opts
opts_before=( "${(z)ZINIT[OPTIONS_BEFORE__$uspl2]}" )
opts_after=( "${(z)ZINIT[OPTIONS_AFTER__$uspl2]}" )
opts=( )
# Iterate through first array (keys the same
# on both of them though) and test for a change
local key
for key in "${(k)opts_before[@]}"; do
if [[ "${opts_before[$key]}" != "${opts_after[$key]}" ]]; then
opts[$key]="${opts_before[$key]}"
fi
done
# Serialize for reporting
local IFS=" "
ZINIT[OPTIONS__$uspl2]="${(kv)opts[@]}"
return 0
} # ]]]
# FUNCTION: .zinit-diff-env-compute [[[
# Computes ZINIT_PATH, ZINIT_FPATH that hold (f)path components
# added by plugin. Uses data gathered earlier by .zinit-diff-env().
#
# $1 - user/plugin
.zinit-diff-env-compute() {
local uspl2="$1"
typeset -a tmp
# Cannot run diff if *_BEFORE or *_AFTER variable is not set
# Following is paranoid for *_BEFORE and *_AFTER being only spaces
builtin setopt localoptions extendedglob nokshglob noksharrays
[[ "${ZINIT[PATH_BEFORE__$uspl2]}" != *[$'! \t']* || "${ZINIT[PATH_AFTER__$uspl2]}" != *[$'! \t']* ]] && return 1
[[ "${ZINIT[FPATH_BEFORE__$uspl2]}" != *[$'! \t']* || "${ZINIT[FPATH_AFTER__$uspl2]}" != *[$'! \t']* ]] && return 1
typeset -A path_state fpath_state
local i
#
# PATH processing
#
# This includes new path elements
for i in "${(z)ZINIT[PATH_AFTER__$uspl2]}"; do
path_state[${(Q)i}]=1
done
# Remove duplicated entries, i.e. existing before
for i in "${(z)ZINIT[PATH_BEFORE__$uspl2]}"; do
unset "path_state[${(Q)i}]"
done
# Store the path elements, associating them with plugin ($uspl2)
ZINIT[PATH__$uspl2]=""
for i in "${(onk)path_state[@]}"; do
ZINIT[PATH__$uspl2]+="${(q)i} "
done
#
# FPATH processing
#
# This includes new path elements
for i in "${(z)ZINIT[FPATH_AFTER__$uspl2]}"; do
fpath_state[${(Q)i}]=1
done
# Remove duplicated entries, i.e. existing before
for i in "${(z)ZINIT[FPATH_BEFORE__$uspl2]}"; do
unset "fpath_state[${(Q)i}]"
done
# Store the path elements, associating them with plugin ($uspl2)
ZINIT[FPATH__$uspl2]=""
for i in "${(onk)fpath_state[@]}"; do
ZINIT[FPATH__$uspl2]+="${(q)i} "
done
return 0
} # ]]]
# FUNCTION: .zinit-diff-parameter-compute [[[
# Computes ZINIT_PARAMETERS_PRE, ZINIT_PARAMETERS_POST that hold
# parameters created or changed (their type) by plugin. Uses
# data gathered earlier by .zinit-diff-parameter().
#
# $1 - user/plugin
.zinit-diff-parameter-compute() {
local uspl2="$1"
typeset -a tmp
# Cannot run diff if *_BEFORE or *_AFTER variable is not set
# Following is paranoid for *_BEFORE and *_AFTER being only spaces
builtin setopt localoptions extendedglob nokshglob noksharrays
[[ "${ZINIT[PARAMETERS_BEFORE__$uspl2]}" != *[$'! \t']* || "${ZINIT[PARAMETERS_AFTER__$uspl2]}" != *[$'! \t']* ]] && return 1
# Un-concatenated parameters from moment of diff start and of diff end
typeset -A params_before params_after
params_before=( "${(z)ZINIT[PARAMETERS_BEFORE__$uspl2]}" )
params_after=( "${(z)ZINIT[PARAMETERS_AFTER__$uspl2]}" )
# The parameters that changed, with save of what
# parameter was when diff started or when diff ended
typeset -A params_pre params_post
params_pre=( )
params_post=( )
# Iterate through all existing keys, before or after diff,
# i.e. after all variables that were somehow live across
# the diffing process
local key
typeset -aU keys
keys=( "${(k)params_after[@]}" );
keys=( "${keys[@]}" "${(k)params_before[@]}" );
for key in "${keys[@]}"; do
key="${(Q)key}"
[[ "${params_after[$key]}" = *local* ]] && continue
if [[ "${params_after[$key]}" != "${params_before[$key]}" ]]; then
# Empty for a new param, a type otherwise
[[ -z "${params_before[$key]}" ]] && params_before[$key]="\"\""
params_pre[$key]="${params_before[$key]}"
# Current type, can also be empty, when plugin
# unsets a parameter
[[ -z "${params_after[$key]}" ]] && params_after[$key]="\"\""
params_post[$key]="${params_after[$key]}"
fi
done
# Serialize for reporting
ZINIT[PARAMETERS_PRE__$uspl2]="${(j: :)${(qkv)params_pre[@]}}"
ZINIT[PARAMETERS_POST__$uspl2]="${(j: :)${(qkv)params_post[@]}}"
return 0
} # ]]]
# FUNCTION: .zinit-any-to-uspl2 [[[
# Converts given plugin-spec to format that's used in keys for hash tables.
# So basically, creates string "user/plugin" (this format is called: uspl2).
#
# $1 - plugin spec (4 formats: user---plugin, user/plugin, user, plugin)
# $2 - (optional) plugin (only when $1 - i.e. user - given)
.zinit-any-to-uspl2() {
.zinit-any-to-user-plugin "$1" "$2"
[[ "${reply[-2]}" = "%" ]] && REPLY="${reply[-2]}${reply[-1]}" || REPLY="${reply[-2]}${${reply[-2]:#(%|/)*}:+/}${reply[-1]//---//}"
} # ]]]
# FUNCTION: .zinit-save-set-extendedglob [[[
# Enables extendedglob-option first saving if it was already
# enabled, for restoration of this state later.
.zinit-save-set-extendedglob() {
[[ -o "extendedglob" ]] && ZINIT[EXTENDED_GLOB]="1" || ZINIT[EXTENDED_GLOB]="0"
builtin setopt extendedglob
} # ]]]
# FUNCTION: .zinit-restore-extendedglob [[[
# Restores extendedglob-option from state saved earlier.
.zinit-restore-extendedglob() {
[[ "${ZINIT[EXTENDED_GLOB]}" = "0" ]] && builtin unsetopt extendedglob || builtin setopt extendedglob
} # ]]]
# FUNCTION: .zinit-prepare-readlink [[[
# Prepares readlink command, used for establishing completion's owner.
#
# $REPLY = ":" or "readlink"
.zinit-prepare-readlink() {
REPLY=":"
if type readlink 2>/dev/null 1>&2; then
REPLY="readlink"
fi
} # ]]]
# FUNCTION: .zinit-clear-report-for [[[
# Clears all report data for given user/plugin. This is
# done by resetting all related global ZINIT_* hashes.
#
# $1 - plugin spec (4 formats: user---plugin, user/plugin, user, plugin)
# $2 - (optional) plugin (only when $1 - i.e. user - given)
.zinit-clear-report-for() {
.zinit-any-to-uspl2 "$1" "$2"
# Shadowing
ZINIT_REPORTS[$REPLY]=""
ZINIT[BINDKEYS__$REPLY]=""
ZINIT[ZSTYLES__$REPLY]=""
ZINIT[ALIASES__$REPLY]=""
ZINIT[WIDGETS_SAVED__$REPLY]=""
ZINIT[WIDGETS_DELETE__$REPLY]=""
# Function diffing
ZINIT[FUNCTIONS__$REPLY]=""
ZINIT[FUNCTIONS_BEFORE__$REPLY]=""
ZINIT[FUNCTIONS_AFTER__$REPLY]=""
# Option diffing
ZINIT[OPTIONS__$REPLY]=""
ZINIT[OPTIONS_BEFORE__$REPLY]=""
ZINIT[OPTIONS_AFTER__$REPLY]=""
# Environment diffing
ZINIT[PATH__$REPLY]=""
ZINIT[PATH_BEFORE__$REPLY]=""
ZINIT[PATH_AFTER__$REPLY]=""
ZINIT[FPATH__$REPLY]=""
ZINIT[FPATH_BEFORE__$REPLY]=""
ZINIT[FPATH_AFTER__$REPLY]=""
# Parameter diffing
ZINIT[PARAMETERS_PRE__$REPLY]=""
ZINIT[PARAMETERS_POST__$REPLY]=""
ZINIT[PARAMETERS_BEFORE__$REPLY]=""
ZINIT[PARAMETERS_AFTER__$REPLY]=""
} # ]]]
# FUNCTION: .zinit-exists-message [[[
# Checks if plugin is loaded. Testable. Also outputs error
# message if plugin is not loaded.
#
# $1 - plugin spec (4 formats: user---plugin, user/plugin, user, plugin)
# $2 - (optional) plugin (only when $1 - i.e. user - given)
.zinit-exists-message() {
.zinit-any-to-uspl2 "$1" "$2"
if [[ -z "${ZINIT_REGISTERED_PLUGINS[(r)$REPLY]}" ]]; then
.zinit-any-colorify-as-uspl2 "$1" "$2"
builtin print "${ZINIT[col-error]}No such plugin${ZINIT[col-rst]} $REPLY"
return 1
fi
return 0
} # ]]]
# FUNCTION: .zinit-at-eval [[[
.zinit-at-eval() {
local atclone="$2" atpull="$1"
integer retval
@zinit-substitute atclone atpull
[[ $atpull = "%atclone" ]] && { eval "$atclone"; retval=$?; } || { eval "$atpull"; retval=$?; }
return $retval
}
# ]]]
#
# Format functions
#
# FUNCTION: .zinit-format-functions [[[
# Creates a one or two columns text with functions created
# by given plugin.
#
# $1 - user/plugin (i.e. uspl2 format of plugin-spec)
.zinit-format-functions() {
local uspl2="$1"
typeset -a func
func=( "${(z)ZINIT[FUNCTIONS__$uspl2]}" )
# Get length of longest left-right string pair,
# and length of longest left string
integer longest=0 longest_left=0 cur_left_len=0 count=1
local f
for f in "${(on)func[@]}"; do
[[ -z "${#f}" ]] && continue
f="${(Q)f}"
# Compute for elements in left column,
# ones that will be paded with spaces
if (( count ++ % 2 != 0 )); then
[[ "${#f}" -gt "$longest_left" ]] && longest_left="${#f}"
cur_left_len="${#f}"
else
cur_left_len+="${#f}"
cur_left_len+=1 # For separating space
[[ "$cur_left_len" -gt "$longest" ]] && longest="$cur_left_len"
fi
done
# Output in one or two columns
local answer=""
count=1
for f in "${(on)func[@]}"; do
[[ -z "$f" ]] && continue
f="${(Q)f}"
if (( COLUMNS >= longest )); then
if (( count ++ % 2 != 0 )); then
answer+="${(r:longest_left+1:: :)f}"
else
answer+="$f"$'\n'
fi
else
answer+="$f"$'\n'
fi
done
REPLY="$answer"
# == 0 is: next element would have newline (postfix addition in "count ++")
(( COLUMNS >= longest && count % 2 == 0 )) && REPLY="$REPLY"$'\n'
} # ]]]
# FUNCTION: .zinit-format-options [[[
# Creates one-column text about options that changed when
# plugin "$1" was loaded.
#
# $1 - user/plugin (i.e. uspl2 format of plugin-spec)
.zinit-format-options() {
local uspl2="$1"
REPLY=""
# Paranoid, don't want bad key/value pair error
integer empty=0
.zinit-save-set-extendedglob
[[ "${ZINIT[OPTIONS__$uspl2]}" != *[$'! \t']* ]] && empty=1
.zinit-restore-extendedglob
(( empty )) && return 0
typeset -A opts
opts=( "${(z)ZINIT[OPTIONS__$uspl2]}" )
# Get length of longest option
integer longest=0
local k
for k in "${(kon)opts[@]}"; do
[[ "${#k}" -gt "$longest" ]] && longest="${#k}"
done
# Output in one column
local txt
for k in "${(kon)opts[@]}"; do
[[ "${opts[$k]}" = "on" ]] && txt="was unset" || txt="was set"
REPLY+="${(r:longest+1:: :)k}$txt"$'\n'
done
} # ]]]
# FUNCTION: .zinit-format-env [[[
# Creates one-column text about FPATH or PATH elements
# added when given plugin was loaded.
#
# $1 - user/plugin (i.e. uspl2 format of plugin-spec)
# $2 - if 1, then examine PATH, if 2, then examine FPATH
.zinit-format-env() {
local uspl2="$1" which="$2"
# Format PATH?
if [[ "$which" = "1" ]]; then
typeset -a elem
elem=( "${(z@)ZINIT[PATH__$uspl2]}" )
elif [[ "$which" = "2" ]]; then
typeset -a elem
elem=( "${(z@)ZINIT[FPATH__$uspl2]}" )
fi
# Enumerate elements added
local answer="" e
for e in "${elem[@]}"; do
[[ -z "$e" ]] && continue
e="${(Q)e}"
answer+="$e"$'\n'
done
[[ -n "$answer" ]] && REPLY="$answer"
} # ]]]
# FUNCTION: .zinit-format-parameter [[[
# Creates one column text that lists global parameters that
# changed when the given plugin was loaded.
#
# $1 - user/plugin (i.e. uspl2 format of plugin-spec)
.zinit-format-parameter() {
local uspl2="$1" infoc="${ZINIT[col-info]}" k
builtin setopt localoptions extendedglob nokshglob noksharrays
REPLY=""
[[ "${ZINIT[PARAMETERS_PRE__$uspl2]}" != *[$'! \t']* || "${ZINIT[PARAMETERS_POST__$uspl2]}" != *[$'! \t']* ]] && return 0
typeset -A elem_pre elem_post
elem_pre=( "${(z)ZINIT[PARAMETERS_PRE__$uspl2]}" )
elem_post=( "${(z)ZINIT[PARAMETERS_POST__$uspl2]}" )
# Find longest key and longest value
integer longest=0 vlongest1=0 vlongest2=0
local v1 v2
for k in "${(k)elem_post[@]}"; do
k="${(Q)k}"
[[ "${#k}" -gt "$longest" ]] && longest="${#k}"
v1="${(Q)elem_pre[$k]}"
v2="${(Q)elem_post[$k]}"
[[ "${#v1}" -gt "$vlongest1" ]] && vlongest1="${#v1}"
[[ "${#v2}" -gt "$vlongest2" ]] && vlongest2="${#v2}"
done
# Enumerate parameters that changed. A key
# always exists in both of the arrays
local answer="" k
for k in "${(k)elem_post[@]}"; do
v1="${(Q)elem_pre[$k]}"
v2="${(Q)elem_post[$k]}"
k="${(Q)k}"
k="${(r:longest+1:: :)k}"
v1="${(l:vlongest1+1:: :)v1}"
v2="${(r:vlongest2+1:: :)v2}"
answer+="$k ${infoc}[$v1 -> $v2]${ZINIT[col-rst]}"$'\n'
done
[[ -n "$answer" ]] && REPLY="$answer"
return 0
} # ]]]
#
# Completion functions
#
# FUNCTION: .zinit-get-completion-owner [[[
# Returns "user---plugin" string (uspl1 format) of plugin that
# owns given completion.
#
# Both :A and readlink will be used, then readlink's output if
# results differ. Readlink might not be available.
#
# :A will read the link "twice" and give the final repository
# directory, possibly without username in the uspl format;
# readlink will read the link "once"
#
# $1 - absolute path to completion file (in COMPLETIONS_DIR)
# $2 - readlink command (":" or "readlink")
.zinit-get-completion-owner() {
setopt localoptions extendedglob nokshglob noksharrays noshwordsplit
local cpath="$1"
local readlink_cmd="$2"
local in_plugin_path tmp
# Try to go not too deep into resolving the symlink,
# to have the name as it is in .zinit/plugins
# :A goes deep, descends fully to origin directory
# Readlink just reads what symlink points to
in_plugin_path="${cpath:A}"
tmp=$( "$readlink_cmd" "$cpath" )
# This in effect works as: "if different, then readlink"
[[ -n "$tmp" ]] && in_plugin_path="$tmp"
if [[ "$in_plugin_path" != "$cpath" && -r "$in_plugin_path" ]]; then
# Get the user---plugin part of path
while [[ "$in_plugin_path" != ${ZINIT[PLUGINS_DIR]}/[^/]## && "$in_plugin_path" != "/" && "$in_plugin_path" != "." ]]; do
in_plugin_path="${in_plugin_path:h}"
done
in_plugin_path="${in_plugin_path:t}"
if [[ -z "$in_plugin_path" ]]; then
in_plugin_path="${tmp:h}"
fi
else
# readlink and :A have nothing
in_plugin_path="[unknown]"
fi
REPLY="$in_plugin_path"
} # ]]]
# FUNCTION: .zinit-get-completion-owner-uspl2col [[[
# For shortening of code - returns colorized plugin name
# that owns given completion.
#
# $1 - absolute path to completion file (in COMPLETIONS_DIR)
# $2 - readlink command (":" or "readlink")
.zinit-get-completion-owner-uspl2col() {
# "cpath" "readline_cmd"
.zinit-get-completion-owner "$1" "$2"
.zinit-any-colorify-as-uspl2 "$REPLY"
} # ]]]
# FUNCTION: .zinit-find-completions-of-plugin [[[
# Searches for completions owned by given plugin.
# Returns them in `reply' array.
#
# $1 - plugin spec (4 formats: user---plugin, user/plugin, user, plugin)
# $2 - plugin (only when $1 - i.e. user - given)
.zinit-find-completions-of-plugin() {
builtin setopt localoptions nullglob extendedglob nokshglob noksharrays
.zinit-any-to-user-plugin "$1" "$2"
local user="${reply[-2]}" plugin="${reply[-1]}" uspl
[[ "$user" = "%" ]] && uspl="${user}${plugin}" || uspl="${reply[-2]}${reply[-2]:+---}${reply[-1]//\//---}"
reply=( "${ZINIT[PLUGINS_DIR]}/$uspl"/**/_[^_.]*~*(*.zwc|*.html|*.txt|*.png|*.jpg|*.jpeg|*.js|*.md|*.yml|*.ri|_zsh_highlight*|/zsdoc/*|*.ps1)(DN) )
} # ]]]
# FUNCTION: .zinit-check-comp-consistency [[[
# Zinit creates symlink for each installed completion.
# This function checks whether given completion (i.e.
# file like "_mkdir") is indeed a symlink. Backup file
# is a completion that is disabled - has the leading "_"
# removed.
#
# $1 - path to completion within plugin's directory
# $2 - path to backup file within plugin's directory
.zinit-check-comp-consistency() {
local cfile="$1" bkpfile="$2"
integer error="$3"
# bkpfile must be a symlink
if [[ -e "$bkpfile" && ! -L "$bkpfile" ]]; then
builtin print "${ZINIT[col-error]}Warning: completion's backup file \`${bkpfile:t}' isn't a symlink${ZINIT[col-rst]}"
error=1
fi
# cfile must be a symlink
if [[ -e "$cfile" && ! -L "$cfile" ]]; then
builtin print "${ZINIT[col-error]}Warning: completion file \`${cfile:t}' isn't a symlink${ZINIT[col-rst]}"
error=1
fi
# Tell user that he can manually modify but should do it right
(( error )) && builtin print "${ZINIT[col-error]}Manual edit of ${ZINIT[COMPLETIONS_DIR]} occured?${ZINIT[col-rst]}"
} # ]]]
# FUNCTION: .zinit-check-which-completions-are-installed [[[
# For each argument that each should be a path to completion
# within a plugin's dir, it checks whether that completion
# is installed - returns 0 or 1 on corresponding positions
# in reply.
#
# $1, ... - path to completion within plugin's directory
.zinit-check-which-completions-are-installed() {
local i cfile bkpfile
reply=( )
for i in "$@"; do
cfile="${i:t}"
bkpfile="${cfile#_}"
if [[ -e "${ZINIT[COMPLETIONS_DIR]}"/"$cfile" || -e "${ZINIT[COMPLETIONS_DIR]}"/"$bkpfile" ]]; then
reply+=( "1" )
else
reply+=( "0" )
fi
done
} # ]]]
# FUNCTION: .zinit-check-which-completions-are-enabled [[[
# For each argument that each should be a path to completion
# within a plugin's dir, it checks whether that completion
# is disabled - returns 0 or 1 on corresponding positions
# in reply.
#
# Uninstalled completions will be reported as "0"
# - i.e. disabled
#
# $1, ... - path to completion within plugin's directory
.zinit-check-which-completions-are-enabled() {
local i cfile
reply=( )
for i in "$@"; do
cfile="${i:t}"
if [[ -e "${ZINIT[COMPLETIONS_DIR]}"/"$cfile" ]]; then
reply+=( "1" )
else
reply+=( "0" )
fi
done
} # ]]]
# FUNCTION: .zinit-uninstall-completions [[[
# Removes all completions of given plugin from Zshell (i.e. from FPATH).
# The FPATH is typically `~/.zinit/completions/'.
#
# $1 - plugin spec (4 formats: user---plugin, user/plugin, user, plugin)
# $2 - plugin (only when $1 - i.e. user - given)
.zinit-uninstall-completions() {
builtin emulate -LR zsh ${=${options[xtrace]:#off}:+-o xtrace}
builtin setopt nullglob extendedglob warncreateglobal typesetsilent noshortloops
typeset -a completions symlinked backup_comps
local c cfile bkpfile
integer action global_action=0
.zinit-get-path "$1" "$2"
[[ -e $REPLY ]] && {
completions=( $REPLY/**/_[^_.]*~*(*.zwc|*.html|*.txt|*.png|*.jpg|*.jpeg|*.js|*.md|*.yml|*.ri|_zsh_highlight*|/zsdoc/*|*.ps1)(DN) )
} || {
builtin print "No completions found for \`$1${${1:#(%|/)*}:+${2:+/}}$2'"
return 1
}
symlinked=( ${ZINIT[COMPLETIONS_DIR]}/_[^_.]*~*.zwc )
backup_comps=( ${ZINIT[COMPLETIONS_DIR]}/[^_.]*~*.zwc )
(( ${+functions[.zinit-forget-completion]} )) || builtin source ${ZINIT[BIN_DIR]}"/zinit-install.zsh"
# Delete completions if they are really there, either
# as completions (_fname) or backups (fname)
for c in ${completions[@]}; do
action=0
cfile=${c:t}
bkpfile=${cfile#_}
# Remove symlink to completion
if [[ -n ${symlinked[(r)*/$cfile]} ]]; then
command rm -f ${ZINIT[COMPLETIONS_DIR]}/$cfile
action=1
fi
# Remove backup symlink (created by cdisable)
if [[ -n ${backup_comps[(r)*/$bkpfile]} ]]; then
command rm -f ${ZINIT[COMPLETIONS_DIR]}/$bkpfile
action=1
fi
if (( action )); then
+zinit-message "{info}Uninstalling completion \`{file}$cfile{info}'{…}{rst}"
# Make compinit notice the change
.zinit-forget-completion "$cfile"
(( global_action ++ ))
else
+zinit-message "{info}Completion \`{file}$cfile{info}' not installed.{rst}"
fi
done
if (( global_action > 0 )); then
+zinit-message "{info}Uninstalled {num}$global_action{info} completions.{rst}"
fi
.zinit-compinit >/dev/null
} # ]]]
#
# User-exposed functions
#
# FUNCTION: .zinit-pager [[[
# BusyBox less lacks the -X and -i options, so it can use more
.zinit-pager() {
setopt LOCAL_OPTIONS EQUALS
# Quiet mode ? → no pager.
if (( OPTS[opt_-n,--no-pager] )) {
cat
return 0
}
if [[ ${${:-=less}:A:t} = busybox* ]] {
more 2>/dev/null
(( ${+commands[more]} ))
} else {
less -FRXi 2>/dev/null
(( ${+commands[less]} ))
}
(( $? )) && cat
return 0
}
# ]]]
# FUNCTION: .zinit-self-update [[[
# Updates Zinit code (does a git pull).
#
# User-action entry point.
.zinit-self-update() {
builtin emulate -LR zsh ${=${options[xtrace]:#off}:+-o xtrace}
setopt extendedglob typesetsilent warncreateglobal
[[ $1 = -q ]] && +zinit-message -n "{pre}[self-update]{msg2} Updating Zinit repository{msg2}" \
local nl=$'\n' escape=$'\x1b['
local current_branch=$(builtin pushd $ZINIT[BIN_DIR] > /dev/null && git branch --show-current && popd > /dev/null)
local -a lines
(
builtin cd -q "$ZINIT[BIN_DIR]" \
&& +zinit-message -n "{pre}[self-update]{info} fetching latest changes from {cmd}$current_branch$nl{rst}" \
&& command git fetch --quiet \
&& lines=( ${(f)"$(command git log --color --date=short --pretty=format:'%Cgreen%cd %h %Creset%s %Cred%d%Creset || %b' ..FETCH_HEAD)"} )
if (( ${#lines} > 0 )); then
# Remove the (origin/main ...) segments, to expect only tags to appear
lines=( "${(S)lines[@]//\(([,[:blank:]]#(origin|HEAD|master|main)[^a-zA-Z]##(HEAD|origin|master|main)[,[:blank:]]#)#\)/}" )
# Remove " ||" if it ends the line (i.e. no additional text from the body)
lines=( "${lines[@]/ \|\|[[:blank:]]#(#e)/}" )
# If there's no ref-name, 2 consecutive spaces occur - fix this
lines=( "${lines[@]/(#b)[[:space:]]#\|\|[[:space:]]#(*)(#e)/|| ${match[1]}}" )
lines=( "${lines[@]/(#b)$escape([0-9]##)m[[:space:]]##${escape}m/$escape${match[1]}m${escape}m}" )
# Replace what follows "|| ..." with the same thing but with no
# newlines, and also only first 10 words (the (w)-flag enables
# word-indexing)
lines=( "${lines[@]/(#b)[[:blank:]]#\|\|(*)(#e)/| ${${match[1]//$nl/ }[(w)1,(w)10]}}" )
builtin print -rl -- "${lines[@]}" | .zinit-pager
builtin print
fi
if [[ $1 != -q ]] {
command git pull --no-stat --ff-only origin main
} else {
command git pull --no-stat --quiet --ff-only origin main
}
)
if [[ $1 != -q ]] {
+zinit-message "{pre}[self-update]{info} compiling zinit via {cmd}zcompile{rst}"
}
command rm -f $ZINIT[BIN_DIR]/*.zwc(DN)
zcompile -U $ZINIT[BIN_DIR]/zinit.zsh
zcompile -U $ZINIT[BIN_DIR]/zinit-{'side','install','autoload','additional'}.zsh
zcompile -U $ZINIT[BIN_DIR]/share/git-process-output.zsh
# Load for the current session
[[ $1 != -q ]] && +zinit-message "{pre}[self-update]{info} Reloading Zinit for the current session{rst}"
+zinit-message "{pre}self-update: {msg2}Resetting the repository with command:{rst} ${ICE[reset]:-git reset --hard HEAD} {…}"
source $ZINIT[BIN_DIR]/zinit.zsh
zcompile -U $ZINIT[BIN_DIR]/zinit-{'side','install','autoload'}.zsh
# Read and remember the new modification timestamps
local file
for file ( "" -side -install -autoload ) {
.zinit-get-mtime-into "${ZINIT[BIN_DIR]}/zinit$file.zsh" "ZINIT[mtime$file]"
}
} # ]]]
# FUNCTION: .zinit-show-registered-plugins [[[
# Lists loaded plugins (subcommands list, lodaded).
#
# User-action entry point.
.zinit-show-registered-plugins() {
builtin emulate -LR zsh ${=${options[xtrace]:#off}:+-o xtrace}
setopt extendedglob warncreateglobal typesetsilent noshortloops
typeset -a filtered
local keyword="$1"
keyword="${keyword## ##}"
keyword="${keyword%% ##}"
if [[ -n "$keyword" ]]; then
builtin print "Installed plugins matching ${ZINIT[col-info]}$keyword${ZINIT[col-rst]}:"
filtered=( "${(M)ZINIT_REGISTERED_PLUGINS[@]:#*$keyword*}" )
else
filtered=( "${ZINIT_REGISTERED_PLUGINS[@]}" )
fi
local i
for i in "${filtered[@]}"; do
[[ "$i" = "_local/zinit" ]] && continue
.zinit-any-colorify-as-uspl2 "$i"
# Mark light loads
[[ "${ZINIT[STATES__$i]}" = "1" ]] && REPLY="$REPLY ${ZINIT[col-info]}*${ZINIT[col-rst]}"
builtin print -r -- "$REPLY"
done
} # ]]]
# FUNCTION: .zinit-unload [[[
# 0. Call the Zsh Plugin's Standard *_plugin_unload function
# 0. Call the code provided by the Zsh Plugin's Standard @zsh-plugin-run-at-update
# 1. Delete bindkeys (...)
# 2. Delete Zstyles
# 3. Restore options
# 4. Remove aliases
# 5. Restore Zle state
# 6. Unfunction functions (created by plugin)
# 7. Clean-up FPATH and PATH
# 8. Delete created variables
# 9. Forget the plugin
#
# User-action entry point.
#
# $1 - plugin spec (4 formats: user---plugin, user/plugin, user, plugin)
# $2 - plugin (only when $1 - i.e. user - given)
.zinit-unload() {
.zinit-any-to-user-plugin "$1" "$2"
local uspl2="${reply[-2]}${${reply[-2]:#(%|/)*}:+/}${reply[-1]}" user="${reply[-2]}" plugin="${reply[-1]}" quiet="${${3:+1}:-0}"
local k
.zinit-any-colorify-as-uspl2 "$uspl2"
(( quiet )) || builtin print -r -- "${ZINIT[col-bar]}---${ZINIT[col-rst]} Unloading plugin: $REPLY ${ZINIT[col-bar]}---${ZINIT[col-rst]}"
local ___dir
[[ "$user" = "%" ]] && ___dir="$plugin" || ___dir="${ZINIT[PLUGINS_DIR]}/${user:+${user}---}${plugin//\//---}"
# KSH_ARRAYS immunity
integer correct=0
[[ -o "KSH_ARRAYS" ]] && correct=1
# Allow unload for debug user
if [[ "$uspl2" != "_dtrace/_dtrace" ]]; then
.zinit-exists-message "$1" "$2" || return 1
fi
.zinit-any-colorify-as-uspl2 "$1" "$2"
local uspl2col="$REPLY"
# Store report of the plugin in variable LASTREPORT
typeset -g LASTREPORT
LASTREPORT=`.zinit-show-report "$1" "$2"`
#
# Call the Zsh Plugin's Standard *_plugin_unload function
#
(( ${+functions[${plugin}_plugin_unload]} )) && ${plugin}_plugin_unload
#
# Call the code provided by the Zsh Plugin's Standard @zsh-plugin-run-at-update
#
local -a tmp
local -A sice
tmp=( "${(z@)ZINIT_SICE[$uspl2]}" )
(( ${#tmp} > 1 && ${#tmp} % 2 == 0 )) && sice=( "${(Q)tmp[@]}" ) || sice=()
if [[ -n ${sice[ps-on-unload]} ]]; then
(( quiet )) || builtin print -r "Running plugin's provided unload code: ${ZINIT[col-info]}${sice[ps-on-unload][1,50]}${sice[ps-on-unload][51]:+…}${ZINIT[col-rst]}"
local ___oldcd="$PWD"
() { setopt localoptions noautopushd; builtin cd -q "$___dir"; }
eval "${sice[ps-on-unload]}"
() { setopt localoptions noautopushd; builtin cd -q "$___oldcd"; }
fi
#
# 1. Delete done bindkeys
#
typeset -a string_widget
string_widget=( "${(z)ZINIT[BINDKEYS__$uspl2]}" )
local sw
for sw in "${(Oa)string_widget[@]}"; do
[[ -z "$sw" ]] && continue
# Remove one level of quoting to split using (z)
sw="${(Q)sw}"
typeset -a sw_arr
sw_arr=( "${(z)sw}" )
# Remove one level of quoting to pass to bindkey
local sw_arr1="${(Q)sw_arr[1-correct]}" # Keys
local sw_arr2="${(Q)sw_arr[2-correct]}" # Widget
local sw_arr3="${(Q)sw_arr[3-correct]}" # Optional previous-bound widget
local sw_arr4="${(Q)sw_arr[4-correct]}" # Optional -M or -A or -N
local sw_arr5="${(Q)sw_arr[5-correct]}" # Optional map name
local sw_arr6="${(Q)sw_arr[6-correct]}" # Optional -R (not with -A, -N)
if [[ "$sw_arr4" = "-M" && "$sw_arr6" != "-R" ]]; then
if [[ -n "$sw_arr3" ]]; then
() {
builtin emulate -LR zsh -o extendedglob ${=${options[xtrace]:#off}:+-o xtrace}
(( quiet )) || builtin print -r "Restoring bindkey ${${(q)sw_arr1}//(#m)\\[\^\?\]\[\)\(\'\"\}\{\`]/${MATCH#\\}} $sw_arr3 ${ZINIT[col-info]}in map ${ZINIT[col-rst]}$sw_arr5"
}
bindkey -M "$sw_arr5" "$sw_arr1" "$sw_arr3"
else
(( quiet )) || builtin print -r "Deleting bindkey ${(q)sw_arr1} $sw_arr2 ${ZINIT[col-info]}in map ${ZINIT[col-rst]}$sw_arr5"
bindkey -M "$sw_arr5" -r "$sw_arr1"
fi
elif [[ "$sw_arr4" = "-M" && "$sw_arr6" = "-R" ]]; then
if [[ -n "$sw_arr3" ]]; then
(( quiet )) || builtin print -r "Restoring ${ZINIT[col-info]}range${ZINIT[col-rst]} bindkey ${(q)sw_arr1} $sw_arr3 ${ZINIT[col-info]}in map ${ZINIT[col-rst]}$sw_arr5"
bindkey -RM "$sw_arr5" "$sw_arr1" "$sw_arr3"
else
(( quiet )) || builtin print -r "Deleting ${ZINIT[col-info]}range${ZINIT[col-rst]} bindkey ${(q)sw_arr1} $sw_arr2 ${ZINIT[col-info]}in map ${ZINIT[col-rst]}$sw_arr5"
bindkey -M "$sw_arr5" -Rr "$sw_arr1"
fi
elif [[ "$sw_arr4" != "-M" && "$sw_arr6" = "-R" ]]; then
if [[ -n "$sw_arr3" ]]; then
(( quiet )) || builtin print -r "Restoring ${ZINIT[col-info]}range${ZINIT[col-rst]} bindkey ${(q)sw_arr1} $sw_arr3"
bindkey -R "$sw_arr1" "$sw_arr3"
else
(( quiet )) || builtin print -r "Deleting ${ZINIT[col-info]}range${ZINIT[col-rst]} bindkey ${(q)sw_arr1} $sw_arr2"
bindkey -Rr "$sw_arr1"
fi
elif [[ "$sw_arr4" = "-A" ]]; then
(( quiet )) || builtin print -r "Linking backup-\`main' keymap \`$sw_arr5' back to \`main'"
bindkey -A "$sw_arr5" "main"
elif [[ "$sw_arr4" = "-N" ]]; then
(( quiet )) || builtin print -r "Deleting keymap \`$sw_arr5'"
bindkey -D "$sw_arr5"
else
if [[ -n "$sw_arr3" ]]; then
() {
builtin emulate -LR zsh -o extendedglob ${=${options[xtrace]:#off}:+-o xtrace}
(( quiet )) || builtin print -r "Restoring bindkey ${${(q)sw_arr1}//(#m)\\[\^\?\]\[\)\(\'\"\}\{\`]/${MATCH#\\}} $sw_arr3"
}
bindkey "$sw_arr1" "$sw_arr3"
else
(( quiet )) || builtin print -r "Deleting bindkey ${(q)sw_arr1} $sw_arr2"
bindkey -r "$sw_arr1"
fi
fi
done
#
# 2. Delete created Zstyles
#
typeset -a pattern_style
pattern_style=( "${(z)ZINIT[ZSTYLES__$uspl2]}" )
local ps
for ps in "${(Oa)pattern_style[@]}"; do
[[ -z "$ps" ]] && continue
# Remove one level of quoting to split using (z)
ps="${(Q)ps}"
typeset -a ps_arr
ps_arr=( "${(z)ps}" )
# Remove one level of quoting to pass to zstyle
local ps_arr1="${(Q)ps_arr[1-correct]}"
local ps_arr2="${(Q)ps_arr[2-correct]}"
(( quiet )) || builtin print "Deleting zstyle $ps_arr1 $ps_arr2"
zstyle -d "$ps_arr1" "$ps_arr2"
done
#
# 3. Restore changed options
#
# Paranoid, don't want bad key/value pair error
.zinit-diff-options-compute "$uspl2"
integer empty=0
.zinit-save-set-extendedglob
[[ "${ZINIT[OPTIONS__$uspl2]}" != *[$'! \t']* ]] && empty=1
.zinit-restore-extendedglob
if (( empty != 1 )); then
typeset -A opts
opts=( "${(z)ZINIT[OPTIONS__$uspl2]}" )
for k in "${(kon)opts[@]}"; do
# Internal options
[[ "$k" = "physical" ]] && continue
if [[ "${opts[$k]}" = "on" ]]; then
(( quiet )) || builtin print "Setting option $k"
builtin setopt "$k"
else
(( quiet )) || builtin print "Unsetting option $k"
builtin unsetopt "$k"
fi
done
fi
#
# 4. Delete aliases
#
typeset -a aname_avalue
aname_avalue=( "${(z)ZINIT[ALIASES__$uspl2]}" )
local nv
for nv in "${(Oa)aname_avalue[@]}"; do
[[ -z "$nv" ]] && continue
# Remove one level of quoting to split using (z)
nv="${(Q)nv}"
typeset -a nv_arr
nv_arr=( "${(z)nv}" )
# Remove one level of quoting to pass to unalias
local nv_arr1="${(Q)nv_arr[1-correct]}"
local nv_arr2="${(Q)nv_arr[2-correct]}"
local nv_arr3="${(Q)nv_arr[3-correct]}"
if [[ "$nv_arr3" = "-s" ]]; then
if [[ -n "$nv_arr2" ]]; then
(( quiet )) || builtin print "Restoring ${ZINIT[col-info]}suffix${ZINIT[col-rst]} alias ${nv_arr1}=${nv_arr2}"
alias "$nv_arr1" &> /dev/null && unalias -s -- "$nv_arr1"
alias -s -- "${nv_arr1}=${nv_arr2}"
else
(( quiet )) || alias "$nv_arr1" &> /dev/null && {
builtin print "Removing ${ZINIT[col-info]}suffix${ZINIT[col-rst]} alias ${nv_arr1}"
unalias -s -- "$nv_arr1"
}
fi
elif [[ "$nv_arr3" = "-g" ]]; then
if [[ -n "$nv_arr2" ]]; then
(( quiet )) || builtin print "Restoring ${ZINIT[col-info]}global${ZINIT[col-rst]} alias ${nv_arr1}=${nv_arr2}"
alias "$nv_arr1" &> /dev/null && unalias -g -- "$nv_arr1"
alias -g -- "${nv_arr1}=${nv_arr2}"
else
(( quiet )) || alias "$nv_arr1" &> /dev/null && {
builtin print "Removing ${ZINIT[col-info]}global${ZINIT[col-rst]} alias ${nv_arr1}"
unalias -- "${(q)nv_arr1}"
}
fi
else
if [[ -n "$nv_arr2" ]]; then
(( quiet )) || builtin print "Restoring alias ${nv_arr1}=${nv_arr2}"
alias "$nv_arr1" &> /dev/null && unalias -- "$nv_arr1"
alias -- "${nv_arr1}=${nv_arr2}"
else
(( quiet )) || alias "$nv_arr1" &> /dev/null && {
builtin print "Removing alias ${nv_arr1}"
unalias -- "$nv_arr1"
}
fi
fi
done
#
# 5. Restore Zle state
#
local -a keys
keys=( "${(@on)ZINIT[(I)TIME_<->_*]}" )
integer keys_size=${#keys}
() {
setopt localoptions extendedglob noksharrays typesetsilent
typeset -a restore_widgets skip_delete
local wid
restore_widgets=( "${(z)ZINIT[WIDGETS_SAVED__$uspl2]}" )
for wid in "${(Oa)restore_widgets[@]}"; do
[[ -z "$wid" ]] && continue
wid="${(Q)wid}"
typeset -a orig_saved
orig_saved=( "${(z)wid}" )
local tpe="${orig_saved[1]}"
local orig_saved1="${(Q)orig_saved[2]}" # Original widget
local comp_wid="${(Q)orig_saved[3]}"
local orig_saved2="${(Q)orig_saved[4]}" # Saved target function
local orig_saved3="${(Q)orig_saved[5]}" # Saved previous $widget's contents
local found_time_key="${keys[(r)TIME_<->_${uspl2//\//---}]}" to_process_plugin
integer found_time_idx=0 idx=0
to_process_plugin=""
[[ "$found_time_key" = (#b)TIME_(<->)_* ]] && found_time_idx="${match[1]}"
if (( found_time_idx )); then # Must be true
for (( idx = found_time_idx + 1; idx <= keys_size; ++ idx )); do
found_time_key="${keys[(r)TIME_${idx}_*]}"
local oth_uspl2=""
[[ "$found_time_key" = (#b)TIME_${idx}_(*) ]] && oth_uspl2="${match[1]//---//}"
local -a entry_splitted
entry_splitted=( "${(z@)ZINIT[WIDGETS_SAVED__$oth_uspl2]}" )
integer found_idx="${entry_splitted[(I)(-N|-C)\ $orig_saved1\\\ *]}"
local -a entry_splitted2
entry_splitted2=( "${(z@)ZINIT[BINDKEYS__$oth_uspl2]}" )
integer found_idx2="${entry_splitted2[(I)*\ $orig_saved1\ *]}"
if (( found_idx || found_idx2 ))
then
# Skip multiple loads of the same plugin
# TODO: Fully handle multiple plugin loads
if [[ "$oth_uspl2" != "$uspl2" ]]; then
to_process_plugin="$oth_uspl2"
break # Only the first one is needed
fi
fi
done
if [[ -n "$to_process_plugin" ]]; then
if (( !found_idx && !found_idx2 )); then
(( quiet )) || builtin print "Problem (1) during handling of widget \`$orig_saved1' (contents: $orig_saved2)"
continue
fi
(( quiet )) || builtin print "Chaining widget \`$orig_saved1' to plugin $oth_uspl2"
local -a oth_orig_saved
if (( found_idx )) {
oth_orig_saved=( "${(z)${(Q)entry_splitted[found_idx]}}" )
local oth_fun="${oth_orig_saved[4]}"
# oth_orig_saved[2]="${(q)orig_saved2}" # not do this, because
# we don't want to call other
# plugin's function at any moment
oth_orig_saved[5]="${(q)orig_saved3}" # chain up the widget
entry_splitted[found_idx]="${(q)${(j: :)oth_orig_saved}}"
ZINIT[WIDGETS_SAVED__$oth_uspl2]="${(j: :)entry_splitted}"
} else {
oth_orig_saved=( "${(z)${(Q)entry_splitted2[found_idx2]}}" )
local oth_fun="${widgets[${oth_orig_saved[3]}]#*:}"
}
integer idx="${functions[$orig_saved2][(i)(#b)([^[:space:]]#${orig_saved1}[^[:space:]]#)]}"
if (( idx <= ${#functions[$orig_saved2]} ))
then
local prefix_X="${match[1]#\{}"
[[ $prefix_X != \$* ]] && prefix_X="${prefix_X%\}}"
idx="${functions[$oth_fun][(i)(#b)([^[:space:]]#${orig_saved1}[^[:space:]]#)]}"
if (( idx <= ${#functions[$oth_fun]} )); then
match[1]="${match[1]#\{}"
[[ ${match[1]} != \$* ]] && match[1]="${match[1]%\}}"
eval "local oth_prefix_uspl2_X=\"${match[1]}\""
if [[ "${widgets[$prefix_X]}" = builtin ]]; then
(( quiet )) || builtin print "Builtin-restoring widget \`$oth_prefix_uspl2_X' ($oth_uspl2)"
zle -A ".${prefix_X#.}" "$oth_prefix_uspl2_X"
elif [[ "${widgets[$prefix_X]}" = completion:* ]]; then
(( quiet )) || builtin print "Chain*-restoring widget \`$oth_prefix_uspl2_X' ($oth_uspl2)"
zle -C "$oth_prefix_uspl2_X" "${(@)${(@s.:.)${orig_saved3#user:}}[2,3]}"
else
(( quiet )) || builtin print "Chain-restoring widget \`$oth_prefix_uspl2_X' ($oth_uspl2)"
zle -N "$oth_prefix_uspl2_X" "${widgets[$prefix_X]#user:}"
fi
fi
# The alternate method
#skip_delete+=( "${match[1]}" )
#functions[$oth_fun]="${functions[$oth_fun]//[^\{[:space:]]#$orig_saved1/${match[1]}}"
fi
else
(( quiet )) || builtin print "Restoring Zle widget $orig_saved1"
if [[ "$orig_saved3" = builtin ]]; then
zle -A ".$orig_saved1" "$orig_saved1"
elif [[ "$orig_saved3" = completion:* ]]; then
zle -C "$orig_saved1" "${(@)${(@s.:.)${orig_saved3#user:}}[2,3]}"
else
zle -N "$orig_saved1" "${orig_saved3#user:}"
fi
fi
else
(( quiet )) || builtin print "Problem (2) during handling of widget \`$orig_saved1' (contents: $orig_saved2)"
fi
done
}
typeset -a delete_widgets
delete_widgets=( "${(z)ZINIT[WIDGETS_DELETE__$uspl2]}" )
local wid
for wid in "${(Oa)delete_widgets[@]}"; do
[[ -z "$wid" ]] && continue
wid="${(Q)wid}"
if [[ -n "${skip_delete[(r)$wid]}" ]]; then
builtin print "Would delete $wid"
continue
fi
if [[ "${ZINIT_ZLE_HOOKS_LIST[$wid]}" = "1" ]]; then
(( quiet )) || builtin print "Removing Zle hook \`$wid'"
else
(( quiet )) || builtin print "Removing Zle widget \`$wid'"
fi
zle -D "$wid"
done
#
# 6. Unfunction
#
.zinit-diff-functions-compute "$uspl2"
typeset -a func
func=( "${(z)ZINIT[FUNCTIONS__$uspl2]}" )
local f
for f in "${(on)func[@]}"; do
[[ -z "$f" ]] && continue
f="${(Q)f}"
(( quiet )) || builtin print "Deleting function $f"
(( ${+functions[$f]} )) && unfunction -- "$f"
(( ${+precmd_functions} )) && precmd_functions=( ${precmd_functions[@]:#$f} )
(( ${+preexec_functions} )) && preexec_functions=( ${preexec_functions[@]:#$f} )
(( ${+chpwd_functions} )) && chpwd_functions=( ${chpwd_functions[@]:#$f} )
(( ${+periodic_functions} )) && periodic_functions=( ${periodic_functions[@]:#$f} )
(( ${+zshaddhistory_functions} )) && zshaddhistory_functions=( ${zshaddhistory_functions[@]:#$f} )
(( ${+zshexit_functions} )) && zshexit_functions=( ${zshexit_functions[@]:#$f} )
done
#
# 7. Clean up FPATH and PATH
#
.zinit-diff-env-compute "$uspl2"
# Have to iterate over $path elements and
# skip those that were added by the plugin
typeset -a new elem p
elem=( "${(z)ZINIT[PATH__$uspl2]}" )
for p in "${path[@]}"; do
if [[ -z "${elem[(r)${(q)p}]}" ]] {
new+=( "$p" )
} else {
(( quiet )) || builtin print "Removing PATH element ${ZINIT[col-info]}$p${ZINIT[col-rst]}"
[[ -d "$p" ]] || (( quiet )) || builtin print "${ZINIT[col-error]}Warning:${ZINIT[col-rst]} it didn't exist on disk"
}
done
path=( "${new[@]}" )
# The same for $fpath
elem=( "${(z)ZINIT[FPATH__$uspl2]}" )
new=( )
for p ( "${fpath[@]}" ) {
if [[ -z "${elem[(r)${(q)p}]}" ]] {
new+=( "$p" )
} else {
(( quiet )) || builtin print "Removing FPATH element ${ZINIT[col-info]}$p${ZINIT[col-rst]}"
[[ -d "$p" ]] || (( quiet )) || builtin print "${ZINIT[col-error]}Warning:${ZINIT[col-rst]} it didn't exist on disk"
}
}
fpath=( "${new[@]}" )
#
# 8. Delete created variables
#
.zinit-diff-parameter-compute "$uspl2"
empty=0
.zinit-save-set-extendedglob
[[ "${ZINIT[PARAMETERS_POST__$uspl2]}" != *[$'! \t']* ]] && empty=1
.zinit-restore-extendedglob
if (( empty != 1 )); then
typeset -A elem_pre elem_post
elem_pre=( "${(z)ZINIT[PARAMETERS_PRE__$uspl2]}" )
elem_post=( "${(z)ZINIT[PARAMETERS_POST__$uspl2]}" )
# Find variables created or modified
local wl found
local -a whitelist
whitelist=( "${(@Q)${(z@)ZINIT[ENV-WHITELIST]}}" )
for k in "${(k)elem_post[@]}"; do
k="${(Q)k}"
local v1="${(Q)elem_pre[$k]}"
local v2="${(Q)elem_post[$k]}"
# "" means a variable was deleted, not created/changed
if [[ $v2 != '""' ]]; then
# Don't unset readonly variables
[[ ${(tP)k} == *-readonly(|-*) ]] && continue
# Don't unset arrays managed by add-zsh-hook,
# also ignore a few special parameters
# TODO: remember and remove hooks
case "$k" in
(chpwd_functions|precmd_functions|preexec_functions|periodic_functions|zshaddhistory_functions|zshexit_functions|zsh_directory_name_functions)
continue
(path|PATH|fpath|FPATH)
continue;
;;
esac
# Don't unset redefined variables, only newly defined
# "" means variable didn't exist before plugin load
# (didn't have a type).
# Do an exception for the prompt variables.
if [[ $v1 = '""' || ( $k = (RPROMPT|RPS1|RPS2|PROMPT|PS1|PS2|PS3|PS4) && $v1 != $v2 ) ]]; then
found=0
for wl in "${whitelist[@]}"; do
if [[ "$k" = ${~wl} ]]; then
found=1
break
fi
done
if (( !found )); then
(( quiet )) || builtin print "Unsetting variable $k"
# Checked that 4.3.17 does support "--"
# There cannot be parameter starting with
# "-" but let's defensively use "--" here
unset -- "$k"
else
builtin print "Skipping unset of variable $k (whitelist)"
fi
fi
fi
done
fi
#
# 9. Forget the plugin
#
if [[ "$uspl2" = "_dtrace/_dtrace" ]]; then
.zinit-clear-debug-report
(( quiet )) || builtin print "dtrace report saved to \$LASTREPORT"
else
(( quiet )) || builtin print "Unregistering plugin $uspl2col"
.zinit-unregister-plugin "$user" "$plugin" "${sice[teleid]}"
zsh_loaded_plugins[${zsh_loaded_plugins[(i)$user${${user:#(%|/)*}:+/}$plugin]}]=() # Support Zsh plugin standard
.zinit-clear-report-for "$user" "$plugin"
(( quiet )) || builtin print "Plugin's report saved to \$LASTREPORT"
fi
} # ]]]
# FUNCTION: .zinit-show-report [[[
# Displays report of the plugin given.
#
# User-action entry point.
#
# $1 - plugin spec (4 formats: user---plugin, user/plugin, user (+ plugin in $2), plugin)
# $2 - plugin (only when $1 - i.e. user - given)
.zinit-show-report() {
setopt localoptions extendedglob warncreateglobal typesetsilent noksharrays
.zinit-any-to-user-plugin "$1" "$2"
local user="${reply[-2]}" plugin="${reply[-1]}" uspl2="${reply[-2]}${${reply[-2]:#(%|/)*}:+/}${reply[-1]}"
# Allow debug report
if [[ "$user/$plugin" != "_dtrace/_dtrace" ]]; then
.zinit-exists-message "$user" "$plugin" || return 1
fi
# Print title
builtin printf "${ZINIT[col-title]}Report for${ZINIT[col-rst]} %s%s plugin\n"\
"${user:+${ZINIT[col-uname]}$user${ZINIT[col-rst]}}${${user:#(%|/)*}:+/}"\
"${ZINIT[col-pname]}$plugin${ZINIT[col-rst]}"
# Print "----------"
local msg="Report for $user${${user:#(%|/)*}:+/}$plugin plugin"
builtin print -- "${ZINIT[col-bar]}${(r:${#msg}::-:)tmp__}${ZINIT[col-rst]}"
local -A map
map=(
Error: "${ZINIT[col-error]}"
Warning: "${ZINIT[col-error]}"
Note: "${ZINIT[col-note]}"
)
# Print report gathered via shadowing
() {
setopt localoptions extendedglob
builtin print -rl -- "${(@)${(f@)ZINIT_REPORTS[$uspl2]}/(#b)(#s)([^[:space:]]##)([[:space:]]##)/${map[${match[1]}]:-${ZINIT[col-keyword]}}${match[1]}${ZINIT[col-rst]}${match[2]}}"
}
# Print report gathered via $functions-diffing
REPLY=""
.zinit-diff-functions-compute "$uspl2"
.zinit-format-functions "$uspl2"
[[ -n "$REPLY" ]] && builtin print "${ZINIT[col-p]}Functions created:${ZINIT[col-rst]}"$'\n'"$REPLY"
# Print report gathered via $options-diffing
REPLY=""
.zinit-diff-options-compute "$uspl2"
.zinit-format-options "$uspl2"
[[ -n "$REPLY" ]] && builtin print "${ZINIT[col-p]}Options changed:${ZINIT[col-rst]}"$'\n'"$REPLY"
# Print report gathered via environment diffing
REPLY=""
.zinit-diff-env-compute "$uspl2"
.zinit-format-env "$uspl2" "1"
[[ -n "$REPLY" ]] && builtin print "${ZINIT[col-p]}PATH elements added:${ZINIT[col-rst]}"$'\n'"$REPLY"
REPLY=""
.zinit-format-env "$uspl2" "2"
[[ -n "$REPLY" ]] && builtin print "${ZINIT[col-p]}FPATH elements added:${ZINIT[col-rst]}"$'\n'"$REPLY"
# Print report gathered via parameter diffing
.zinit-diff-parameter-compute "$uspl2"
.zinit-format-parameter "$uspl2"
[[ -n "$REPLY" ]] && builtin print "${ZINIT[col-p]}Variables added or redefined:${ZINIT[col-rst]}"$'\n'"$REPLY"
# Print what completions plugin has
.zinit-find-completions-of-plugin "$user" "$plugin"
typeset -a completions
completions=( "${reply[@]}" )
if [[ "${#completions[@]}" -ge "1" ]]; then
builtin print "${ZINIT[col-p]}Completions:${ZINIT[col-rst]}"
.zinit-check-which-completions-are-installed "${completions[@]}"
typeset -a installed
installed=( "${reply[@]}" )
.zinit-check-which-completions-are-enabled "${completions[@]}"
typeset -a enabled
enabled=( "${reply[@]}" )
integer count="${#completions[@]}" idx
for (( idx=1; idx <= count; idx ++ )); do
builtin print -n "${completions[idx]:t}"
if [[ "${installed[idx]}" != "1" ]]; then
builtin print -n " ${ZINIT[col-uninst]}[not installed]${ZINIT[col-rst]}"
else
if [[ "${enabled[idx]}" = "1" ]]; then
builtin print -n " ${ZINIT[col-info]}[enabled]${ZINIT[col-rst]}"
else
builtin print -n " ${ZINIT[col-error]}[disabled]${ZINIT[col-rst]}"
fi
fi
builtin print
done
builtin print
fi
} # ]]]
# FUNCTION: .zinit-show-all-reports [[[
# Displays reports of all loaded plugins.
#
# User-action entry point.
.zinit-show-all-reports() {
local i
for i in "${ZINIT_REGISTERED_PLUGINS[@]}"; do
[[ "$i" = "_local/zinit" ]] && continue
.zinit-show-report "$i"
done
} # ]]]
# FUNCTION: .zinit-show-debug-report [[[
# Displays dtrace report (data recorded in interactive session).
#
# User-action entry point.
.zinit-show-debug-report() {
.zinit-show-report "_dtrace/_dtrace"
} # ]]]
# FUNCTION: .zinit-update-or-status [[[
# Updates (git pull) or does `git status' for given plugin.
#
# User-action entry point.
#
# $1 - "status" for status, other for update
# $2 - plugin spec (4 formats: user---plugin, user/plugin, user (+ plugin in $2), plugin)
# $3 - plugin (only when $1 - i.e. user - given)
.zinit-update-or-status() {
# Set the localtraps option.
builtin emulate -LR zsh ${=${options[xtrace]:#off}:+-o xtrace}
setopt extendedglob nullglob warncreateglobal typesetsilent noshortloops
local -a arr
ZINIT[first-plugin-mark]=${${ZINIT[first-plugin-mark]:#init}:-1}
ZINIT[-r/--reset-opt-hook-has-been-run]=0
# Deliver and withdraw the `m` function when finished.
.zinit-set-m-func set
trap ".zinit-set-m-func unset" EXIT
integer retval hook_rc was_snippet
.zinit-two-paths "$2${${2:#(%|/)*}:+${3:+/}}$3"
if [[ -d ${reply[-4]} || -d ${reply[-2]} ]]; then
.zinit-update-or-status-snippet "$1" "$2${${2:#(%|/)*}:+${3:+/}}$3"
retval=$?
was_snippet=1
fi
.zinit-any-to-user-plugin "$2" "$3"
local user=${reply[-2]} plugin=${reply[-1]} st=$1 \
local_dir filename is_snippet key \
id_as="${reply[-2]}${${reply[-2]:#(%|/)*}:+/}${reply[-1]}"
local -A ice
if (( was_snippet )) {
.zinit-exists-physically "$user" "$plugin" || return $retval
.zinit-any-colorify-as-uspl2 "$2" "$3"
(( !OPTS[opt_-q,--quiet] )) && \
+zinit-message "{msg2}Updating also \`$REPLY{rst}{msg2}'" \
"plugin (already updated a snippet of the same name){…}{rst}"
} else {
.zinit-exists-physically-message "$user" "$plugin" || return 1
}
if [[ $st = status ]]; then
( builtin cd -q ${ZINIT[PLUGINS_DIR]}/${user:+${user}---}${plugin//\//---}; command git status; )
return $retval
fi
command rm -f ${TMPDIR:-${TMPDIR:-/tmp}}/zinit-execs.$$.lst ${TMPDIR:-${TMPDIR:-/tmp}}/zinit.installed_comps.$$.lst \
${TMPDIR:-${TMPDIR:-/tmp}}/zinit.skipped_comps.$$.lst ${TMPDIR:-${TMPDIR:-/tmp}}/zinit.compiled.$$.lst
# A flag for the annexes. 0 – no new commits, 1 - run-atpull mode,
# 2 – full update/there are new commits to download, 3 - full but
# a forced download (i.e.: the medium doesn't allow to peek update)
ZINIT[annex-multi-flag:pull-active]=0
(( ${#ICE[@]} > 0 )) && { ZINIT_SICE[$user${${user:#(%|/)*}:+/}$plugin]=""; local nf="-nftid"; }
.zinit-compute-ice "$user${${user:#(%|/)*}:+/}$plugin" "pack$nf" \
ice local_dir filename is_snippet || return 1
.zinit-any-to-user-plugin ${ice[teleid]:-$id_as}
user=${reply[1]} plugin=${reply[2]}
local repo="${${${(M)id_as#%}:+${id_as#%}}:-${ZINIT[PLUGINS_DIR]}/${id_as//\//---}}"
# Run annexes' preinit hooks
local -a arr
reply=(
${(on)ZINIT_EXTS2[(I)zinit hook:preinit-pre <->]}
${(on)ZINIT_EXTS[(I)z-annex hook:preinit-<-> <->]}
${(on)ZINIT_EXTS2[(I)zinit hook:preinit-post <->]}
)
for key in "${reply[@]}"; do
arr=( "${(Q)${(z@)ZINIT_EXTS[$key]:-$ZINIT_EXTS2[$key]}[@]}" )
"${arr[5]}" plugin "$user" "$plugin" "$id_as" "$local_dir" ${${key##(zinit|z-annex) hook:}%% <->} update || \
return $(( 10 - $? ))
done
# Check if repository has a remote set, if it is _local
if [[ -f $local_dir/.git/config ]]; then
local -a config
config=( ${(f)"$(<$local_dir/.git/config)"} )
if [[ ${#${(M)config[@]:#\[remote[[:blank:]]*\]}} -eq 0 ]]; then
(( !OPTS[opt_-q,--quiet] )) && {
.zinit-any-colorify-as-uspl2 "$id_as"
[[ $id_as = _local/* ]] && builtin print -r -- "Skipping local plugin $REPLY" || \
builtin print -r -- "$REPLY doesn't have a remote set, will not fetch"
}
return 1
fi
fi
command rm -f $local_dir/.zinit_lastupd
if (( 1 )); then
if [[ -z ${ice[is_release]} && ${ice[from]} = (gh-r|github-rel|cygwin) ]] {
ice[is_release]=true
}
integer count is_release=0
for (( count = 1; count <= 5; ++ count )) {
if (( ${+ice[is_release${count:#1}]} )) {
is_release=1
}
}
(( ${+functions[.zinit-setup-plugin-dir]} )) || builtin source ${ZINIT[BIN_DIR]}"/zinit-install.zsh"
if [[ $ice[from] == (gh-r|github-rel) ]] {
{
ICE=( "${(kv)ice[@]}" )
.zinit-get-latest-gh-r-url-part "$user" "$plugin" || return $?
} always {
ICE=()
}
} else {
REPLY=""
}
if (( is_release )) {
count=0
for REPLY ( $reply ) {
count+=1
local version=${REPLY/(#b)(\/[^\/]##)(#c4,4)\/([^\/]##)*/${match[2]}}
if [[ ${ice[is_release${count:#1}]} = $REPLY ]] {
(( ${+ice[run-atpull]} || OPTS[opt_-u,--urge] )) && \
ZINIT[annex-multi-flag:pull-active]=1 || \
ZINIT[annex-multi-flag:pull-active]=0
} else {
ZINIT[annex-multi-flag:pull-active]=2
break
}
}
if (( ZINIT[annex-multi-flag:pull-active] <= 1 && !OPTS[opt_-q,--quiet] )) {
builtin print -- "\rBinary release already up to date (version: $version)"
}
}
if (( 1 )) {
if (( ZINIT[annex-multi-flag:pull-active] >= 1 )) {
if (( OPTS[opt_-q,--quiet] && !PUPDATE )) {
.zinit-any-colorify-as-uspl2 "$id_as"
(( ZINIT[first-plugin-mark] )) && {
ZINIT[first-plugin-mark]=0
} || builtin print
builtin print "\rUpdating $REPLY"
}
ICE=( "${(kv)ice[@]}" )
# Run annexes' atpull hooks (the before atpull-ice ones).
# The gh-r / GitHub releases block.
reply=(
${(on)ZINIT_EXTS2[(I)zinit hook:e-\\\!atpull-pre <->]}
${${(M)ICE[atpull]#\!}:+${(on)ZINIT_EXTS[(I)z-annex hook:\\\!atpull-<-> <->]}}
${(on)ZINIT_EXTS2[(I)zinit hook:e-\\\!atpull-post <->]}
)
for key in "${reply[@]}"; do
arr=( "${(Q)${(z@)ZINIT_EXTS[$key]:-$ZINIT_EXTS2[$key]}[@]}" )
"${arr[5]}" plugin "$user" "$plugin" "$id_as" "$local_dir" "${${key##(zinit|z-annex) hook:}%% <->}" update:bin
hook_rc=$?
[[ "$hook_rc" -ne 0 ]] && {
# note: this will effectively return the last != 0 rc
retval="$hook_rc"
builtin print -Pr -- "${ZINIT[col-warn]}Warning:%f%b ${ZINIT[col-obj]}${arr[5]}${ZINIT[col-warn]} hook returned with ${ZINIT[col-obj]}${hook_rc}${ZINIT[col-rst]}"
}
done
if (( ZINIT[annex-multi-flag:pull-active] >= 2 )) {
if ! .zinit-setup-plugin-dir "$user" "$plugin" "$id_as" release -u $version; then
ZINIT[annex-multi-flag:pull-active]=0
fi
if (( OPTS[opt_-q,--quiet] != 1 )) {
builtin print
}
}
ICE=()
}
}
if [[ -d $local_dir/.git ]] && ( builtin cd -q $local_dir ; git show-ref --verify --quiet refs/heads/main ); then
local main_branch=main
else
local main_branch=master
fi
if (( ! is_release )) {
( builtin cd -q "$local_dir" || return 1
integer had_output=0
local IFS=$'\n'
command git fetch --quiet && \
command git --no-pager log --color --date=short --pretty=format:'%Cgreen%cd %h %Creset%s%n' ..FETCH_HEAD | \
while read line; do
[[ -n ${line%%[[:space:]]##} ]] && {
[[ $had_output -eq 0 ]] && {
had_output=1
if (( OPTS[opt_-q,--quiet] && !PUPDATE )) {
.zinit-any-colorify-as-uspl2 "$id_as"
(( ZINIT[first-plugin-mark] )) && {
ZINIT[first-plugin-mark]=0
} || builtin print
builtin print "Updating $REPLY"
}
}
builtin print $line
}
done | \
command tee .zinit_lastupd | \
.zinit-pager &
integer pager_pid=$!
{ sleep 20 && kill -9 $pager_pid 2>/dev/null 1>&2; } &!
{ wait $pager_pid; } > /dev/null 2>&1
local -a log
{ log=( ${(@f)"$(<$local_dir/.zinit_lastupd)"} ); } 2>/dev/null
command rm -f $local_dir/.zinit_lastupd
if [[ ${#log} -gt 0 ]] {
ZINIT[annex-multi-flag:pull-active]=2
} else {
if (( ${+ice[run-atpull]} || OPTS[opt_-u,--urge] )) {
ZINIT[annex-multi-flag:pull-active]=1
# Handle the snippet/plugin boundary in the messages
if (( OPTS[opt_-q,--quiet] && !PUPDATE )) {
.zinit-any-colorify-as-uspl2 "$id_as"
(( ZINIT[first-plugin-mark] )) && {
ZINIT[first-plugin-mark]=0
} || builtin print
builtin print "\rUpdating $REPLY"
}
} else {
ZINIT[annex-multi-flag:pull-active]=0
}
}
if (( ZINIT[annex-multi-flag:pull-active] >= 1 )) {
ICE=( "${(kv)ice[@]}" )
# Run annexes' atpull hooks (the before atpull-ice ones).
# The regular Git-plugins block.
reply=(
${(on)ZINIT_EXTS2[(I)zinit hook:e-\\\!atpull-pre <->]}
${${(M)ICE[atpull]#\!}:+${(on)ZINIT_EXTS[(I)z-annex hook:\\\!atpull-<-> <->]}}
${(on)ZINIT_EXTS2[(I)zinit hook:e-\\\!atpull-post <->]}
)
for key in "${reply[@]}"; do
arr=( "${(Q)${(z@)ZINIT_EXTS[$key]:-$ZINIT_EXTS2[$key]}[@]}" )
"${arr[5]}" plugin "$user" "$plugin" "$id_as" "$local_dir" "${${key##(zinit|z-annex) hook:}%% <->}" update:git
hook_rc=$?
[[ "$hook_rc" -ne 0 ]] && {
# note: this will effectively return the last != 0 rc
retval="$hook_rc"
builtin print -Pr -- "${ZINIT[col-warn]}Warning:%f%b ${ZINIT[col-obj]}${arr[5]}${ZINIT[col-warn]} hook returned with ${ZINIT[col-obj]}${hook_rc}${ZINIT[col-rst]}"
}
done
ICE=()
(( ZINIT[annex-multi-flag:pull-active] >= 2 )) && command git pull --no-stat ${=ice[pullopts]:---ff-only} origin ${ice[ver]:-$main_branch} |& command egrep -v '(FETCH_HEAD|up.to.date\.|From.*://)'
}
return ${ZINIT[annex-multi-flag:pull-active]}
)
ZINIT[annex-multi-flag:pull-active]=$?
}
if [[ -d $local_dir/.git ]]; then
(
builtin cd -q "$local_dir" # || return 1 - don't return, maybe it's some hook's logic
if (( OPTS[opt_-q,--quiet] )) {
command git pull --recurse-submodules ${=ice[pullopts]:---ff-only} origin ${ice[ver]:-$main_branch} &> /dev/null
} else {
command git pull --recurse-submodules ${=ice[pullopts]:---ff-only} origin ${ice[ver]:-$main_branch} |& command egrep -v '(FETCH_HEAD|up.to.date\.|From.*://)'
}
)
fi
if [[ -n ${(v)ice[(I)(mv|cp|atpull|ps-on-update|cargo)]} || $+ice[sbin]$+ice[make]$+ice[extract] -ne 0 ]] {
if (( !OPTS[opt_-q,--quiet] && ZINIT[annex-multi-flag:pull-active] == 1 )) {
+zinit-message -n "{pre}[update]{msg3} Continuing with the update because "
(( ${+ice[run-atpull]} )) && \
+zinit-message "{ice}run-atpull{apo}''{msg3} ice given.{rst}" || \
+zinit-message "{opt}-u{msg3}/{opt}--urge{msg3} given.{rst}"
}
}
# Any new commits?
if (( ZINIT[annex-multi-flag:pull-active] >= 1 )) {
ICE=( "${(kv)ice[@]}" )
# Run annexes' atpull hooks (the before atpull[^!]…-ice ones).
# Block common for Git and gh-r plugins.
reply=(
${(on)ZINIT_EXTS2[(I)zinit hook:no-e-\\\!atpull-pre <->]}
${${ICE[atpull]:#\!*}:+${(on)ZINIT_EXTS[(I)z-annex hook:\\\!atpull-<-> <->]}}
${(on)ZINIT_EXTS2[(I)zinit hook:no-e-\\\!atpull-post <->]}
)
for key in "${reply[@]}"; do
arr=( "${(Q)${(z@)ZINIT_EXTS[$key]:-$ZINIT_EXTS2[$key]}[@]}" )
"${arr[5]}" plugin "$user" "$plugin" "$id_as" "$local_dir" "${${key##(zinit|z-annex) hook:}%% <->}" update
hook_rc="$?"
[[ "$hook_rc" -ne 0 ]] && {
# note: this will effectively return the last != 0 rc
retval="$hook_rc"
builtin print -Pr -- "${ZINIT[col-warn]}Warning:%f%b ${ZINIT[col-obj]}${arr[5]}${ZINIT[col-warn]} hook returned with ${ZINIT[col-obj]}${hook_rc}${ZINIT[col-rst]}"
}
done
# Run annexes' atpull hooks (the after atpull-ice ones).
# Block common for Git and gh-r plugins.
reply=(
${(on)ZINIT_EXTS2[(I)zinit hook:atpull-pre <->]}
${(on)ZINIT_EXTS[(I)z-annex hook:atpull-<-> <->]}
${(on)ZINIT_EXTS2[(I)zinit hook:atpull-post <->]}
)
for key in "${reply[@]}"; do
arr=( "${(Q)${(z@)ZINIT_EXTS[$key]:-$ZINIT_EXTS2[$key]}[@]}" )
"${arr[5]}" plugin "$user" "$plugin" "$id_as" "$local_dir" "${${key##(zinit|z-annex) hook:}%% <->}" update
hook_rc="$?"
[[ "$hook_rc" -ne 0 ]] && {
# note: this will effectively return the last != 0 rc
retval="$hook_rc"
builtin print -Pr -- "${ZINIT[col-warn]}Warning:%f%b ${ZINIT[col-obj]}${arr[5]}${ZINIT[col-warn]} hook returned with ${ZINIT[col-obj]}${hook_rc}${ZINIT[col-rst]}"
}
done
ICE=()
}
# Store ices to disk at update of plugin
.zinit-store-ices "$local_dir/._zinit" ice "" "" "" ""
fi
# Run annexes' atpull hooks (the `always' after atpull-ice ones)
# Block common for Git and gh-r plugins.
ICE=( "${(kv)ice[@]}" )
reply=(
${(on)ZINIT_EXTS2[(I)zinit hook:%atpull-pre <->]}
${(on)ZINIT_EXTS[(I)z-annex hook:%atpull-<-> <->]}
${(on)ZINIT_EXTS2[(I)zinit hook:%atpull-post <->]}
)
for key in "${reply[@]}"; do
arr=( "${(Q)${(z@)ZINIT_EXTS[$key]:-$ZINIT_EXTS2[$key]}[@]}" )
"${arr[5]}" plugin "$user" "$plugin" "$id_as" "$local_dir" "${${key##(zinit|z-annex) hook:}%% <->}" update:$ZINIT[annex-multi-flag:pull-active]
hook_rc=$?
[[ "$hook_rc" -ne 0 ]] && {
# note: this will effectively return the last != 0 rc
retval="$hook_rc"
builtin print -Pr -- "${ZINIT[col-warn]}Warning:%f%b ${ZINIT[col-obj]}${arr[5]}${ZINIT[col-warn]} hook returned with ${ZINIT[col-obj]}${hook_rc}${ZINIT[col-rst]}"
}
done
ICE=()
typeset -ga INSTALLED_EXECS
{ INSTALLED_EXECS=( "${(@f)$(<${TMPDIR:-${TMPDIR:-/tmp}}/zinit-execs.$$.lst)}" ) } 2>/dev/null
if [[ -e ${TMPDIR:-${TMPDIR:-/tmp}}/zinit.skipped_comps.$$.lst || -e ${TMPDIR:-${TMPDIR:-/tmp}}/zinit.installed_comps.$$.lst ]] {
typeset -ga INSTALLED_COMPS SKIPPED_COMPS
{ INSTALLED_COMPS=( "${(@f)$(<${TMPDIR:-${TMPDIR:-/tmp}}/zinit.installed_comps.$$.lst)}" ) } 2>/dev/null
{ SKIPPED_COMPS=( "${(@f)$(<${TMPDIR:-${TMPDIR:-/tmp}}/zinit.skipped_comps.$$.lst)}" ) } 2>/dev/null
}
if [[ -e ${TMPDIR:-${TMPDIR:-/tmp}}/zinit.compiled.$$.lst ]] {
typeset -ga ADD_COMPILED
{ ADD_COMPILED=( "${(@f)$(<${TMPDIR:-${TMPDIR:-/tmp}}/zinit.compiled.$$.lst)}" ) } 2>/dev/null
}
if (( PUPDATE && ZINIT[annex-multi-flag:pull-active] > 0 )) {
builtin print ${ZINIT[annex-multi-flag:pull-active]} >! $PUFILE.ind
}
return $retval
} # ]]]
# FUNCTION: .zinit-update-or-status-snippet [[[
#
# Implements update or status operation for snippet given by URL.
#
# $1 - "status" or "update"
# $2 - snippet URL
.zinit-update-or-status-snippet() {
local st="$1" URL="${2%/}" local_dir filename is_snippet
(( ${#ICE[@]} > 0 )) && { ZINIT_SICE[$URL]=""; local nf="-nftid"; }
local -A ICE2
.zinit-compute-ice "$URL" "pack$nf" \
ICE2 local_dir filename is_snippet || return 1
integer retval
if [[ "$st" = "status" ]]; then
if (( ${+ICE2[svn]} )); then
builtin print -r -- "${ZINIT[col-info]}Status for ${${${local_dir:h}:t}##*--}/${local_dir:t}${ZINIT[col-rst]}"
( builtin cd -q "$local_dir"; command svn status -vu )
retval=$?
builtin print
else
builtin print -r -- "${ZINIT[col-info]}Status for ${${local_dir:h}##*--}/$filename${ZINIT[col-rst]}"
( builtin cd -q "$local_dir"; command ls -lth $filename )
retval=$?
builtin print
fi
else
(( ${+functions[.zinit-setup-plugin-dir]} )) || builtin source ${ZINIT[BIN_DIR]}"/zinit-install.zsh"
ICE=( "${(kv)ICE2[@]}" )
.zinit-update-snippet "${ICE2[teleid]:-$URL}"
retval=$?
fi
ICE=()
if (( PUPDATE && ZINIT[annex-multi-flag:pull-active] > 0 )) {
builtin print ${ZINIT[annex-multi-flag:pull-active]} >! $PUFILE.ind
}
return $retval
}
# ]]]
# FUNCTION: .zinit-update-or-status-all [[[
# Updates (git pull) or does `git status` for all existing plugins.
# This includes also plugins that are not loaded into Zsh (but exist
# on disk). Also updates (i.e. redownloads) snippets.
#
# User-action entry point.
.zinit-update-or-status-all() {
builtin emulate -LR zsh ${=${options[xtrace]:#off}:+-o xtrace}
setopt extendedglob nullglob warncreateglobal typesetsilent noshortloops
local -F2 SECONDS=0
.zinit-self-update -q
[[ $2 = restart ]] && \
+zinit-message "{msg2}Restarting the update with the new codebase loaded.{rst}"$'\n'
local file
integer sum el update_rc
for file ( "" -side -install -autoload ) {
.zinit-get-mtime-into "${ZINIT[BIN_DIR]}/zinit$file.zsh" el; sum+=el
}
# Reload Zinit?
if [[ $2 != restart ]] && (( ZINIT[mtime] + ZINIT[mtime-side] +
ZINIT[mtime-install] + ZINIT[mtime-autoload] != sum
)) {
+zinit-message "{msg2}Detected Zinit update in another session -" \
"{pre}reloading Zinit{msg2}{…}{rst}"
source $ZINIT[BIN_DIR]/zinit.zsh
source $ZINIT[BIN_DIR]/zinit-side.zsh
source $ZINIT[BIN_DIR]/zinit-install.zsh
source $ZINIT[BIN_DIR]/zinit-autoload.zsh
for file ( "" -side -install -autoload ) {
.zinit-get-mtime-into "${ZINIT[BIN_DIR]}/zinit$file.zsh" "ZINIT[mtime$file]"
}
+zinit-message "%B{pname}Done.{rst}"$'\n'
.zinit-update-or-status-all "$1" restart
return $?
}
integer retval
if (( OPTS[opt_-p,--parallel] )) && [[ $1 = update ]] {
(( !OPTS[opt_-q,--quiet] )) && \
+zinit-message '{info2}Parallel Update Starts Now{…}{rst}'
.zinit-update-all-parallel
retval=$?
.zinit-compinit 1 1 &>/dev/null
rehash
if (( !OPTS[opt_-q,--quiet] )) {
+zinit-message "{msg2}The update took {obj}${SECONDS}{msg2} seconds{rst}"
}
return $retval
}
local st=$1 id_as repo snip pd user plugin
integer PUPDATE=0
local -A ICE
if (( OPTS[opt_-s,--snippets] || !OPTS[opt_-l,--plugins] )) {
local -a snipps
snipps=( ${ZINIT[SNIPPETS_DIR]}/**/(._zinit|._zplugin)(ND) )
[[ $st != status && ${OPTS[opt_-q,--quiet]} != 1 && -n $snipps ]] && \
+zinit-message "{info}Note:{rst} updating also unloaded snippets"
for snip ( ${ZINIT[SNIPPETS_DIR]}/**/(._zinit|._zplugin)/mode(D) ) {
[[ ! -f ${snip:h}/url ]] && continue
[[ -f ${snip:h}/id-as ]] && \
id_as="$(<${snip:h}/id-as)" || \
id_as=
.zinit-update-or-status-snippet "$st" "${id_as:-$(<${snip:h}/url)}"
ICE=()
}
[[ -n $snipps ]] && builtin print
}
ICE=()
if (( OPTS[opt_-s,--snippets] && !OPTS[opt_-l,--plugins] )) {
return
}
if [[ $st = status ]]; then
(( !OPTS[opt_-q,--quiet] )) && \
+zinit-message "{info}Note:{rst} status done also for unloaded plugins"
else
(( !OPTS[opt_-q,--quiet] )) && \
+zinit-message "{info}Note:{rst} updating also unloaded plugins"
fi
ZINIT[first-plugin-mark]=init
for repo in ${ZINIT[PLUGINS_DIR]}/*; do
pd=${repo:t}
# Two special cases
[[ $pd = custom || $pd = _local---zinit ]] && continue
.zinit-any-colorify-as-uspl2 "$pd"
# Check if repository has a remote set
if [[ -f $repo/.git/config ]]; then
local -a config
config=( ${(f)"$(<$repo/.git/config)"} )
if [[ ${#${(M)config[@]:#\[remote[[:blank:]]*\]}} -eq 0 ]]; then
if (( !OPTS[opt_-q,--quiet] )) {
[[ $pd = _local---* ]] && \
builtin print -- "\nSkipping local plugin $REPLY" || \
builtin print "\n$REPLY doesn't have a remote set, will not fetch"
}
continue
fi
fi
.zinit-any-to-user-plugin "$pd"
local user=${reply[-2]} plugin=${reply[-1]}
# Must be a git repository or a binary release
if [[ ! -d $repo/.git && ! -f $repo/._zinit/is_release ]]; then
(( !OPTS[opt_-q,--quiet] )) && \
builtin print "$REPLY: not a git repository"
continue
fi
if [[ $st = status ]]; then
builtin print "\nStatus for plugin $REPLY"
( builtin cd -q "$repo"; command git status )
else
(( !OPTS[opt_-q,--quiet] )) && builtin print "Updating $REPLY" || builtin print -n .
.zinit-update-or-status update "$user" "$plugin"
update_rc=$?
[[ $update_rc -ne 0 ]] && {
+zinit-message "🚧{warn}Warning: {pid}${user}/${plugin} {warn}update returned {obj}$update_rc"
retval=$?
}
fi
done
.zinit-compinit 1 1 &>/dev/null
if (( !OPTS[opt_-q,--quiet] )) {
+zinit-message "{msg2}The update took {obj}${SECONDS}{msg2} seconds{rst}"
}
return "$retval"
} # ]]]
# FUNCTION: .zinit-update-in-parallel [[[
.zinit-update-all-parallel() {
builtin emulate -LR zsh ${=${options[xtrace]:#off}:+-o xtrace}
setopt extendedglob warncreateglobal typesetsilent \
noshortloops nomonitor nonotify
local id_as repo snip uspl user plugin PUDIR="$(mktemp -d)"
local -A PUAssocArray map
map=( / -- "=" -EQ- "?" -QM- "&" -AMP- : - )
local -a files
integer main_counter counter PUPDATE=1
files=( ${ZINIT[SNIPPETS_DIR]}/**/(._zinit|._zplugin)/mode(ND) )
main_counter=${#files}
if (( OPTS[opt_-s,--snippets] || !OPTS[opt_-l,--plugins] )) {
for snip ( "${files[@]}" ) {
main_counter=main_counter-1
# The continue may cause the tail of processes to
# fall-through to the following plugins-specific `wait'
# Should happen only in a very special conditions
# TODO handle this
[[ ! -f ${snip:h}/url ]] && continue
[[ -f ${snip:h}/id-as ]] && \
id_as="$(<${snip:h}/id-as)" || \
id_as=
counter+=1
local ef_id="${id_as:-$(<${snip:h}/url)}"
local PUFILEMAIN=${${ef_id#/}//(#m)[\/=\?\&:]/${map[$MATCH]}}
local PUFILE=$PUDIR/${counter}_$PUFILEMAIN.out
.zinit-update-or-status-snippet "$st" "$ef_id" &>! $PUFILE &
PUAssocArray[$!]=$PUFILE
.zinit-wait-for-update-jobs snippets
}
}
counter=0
PUAssocArray=()
if (( OPTS[opt_-l,--plugins] || !OPTS[opt_-s,--snippets] )) {
local -a files2
files=( ${ZINIT[PLUGINS_DIR]}/*(ND/) )
# Pre-process plugins
for repo ( $files ) {
uspl=${repo:t}
# Two special cases
[[ $uspl = custom || $uspl = _local---zinit ]] && continue
# Check if repository has a remote set
if [[ -f $repo/.git/config ]] {
local -a config
config=( ${(f)"$(<$repo/.git/config)"} )
if [[ ${#${(M)config[@]:#\[remote[[:blank:]]*\]}} -eq 0 ]] {
continue
}
}
.zinit-any-to-user-plugin "$uspl"
local user=${reply[-2]} plugin=${reply[-1]}
# Must be a git repository or a binary release
if [[ ! -d $repo/.git && ! -f $repo/._zinit/is_release ]] {
continue
}
files2+=( $repo )
}
main_counter=${#files2}
for repo ( "${files2[@]}" ) {
main_counter=main_counter-1
uspl=${repo:t}
id_as=${uspl//---//}
counter+=1
local PUFILEMAIN=${${id_as#/}//(#m)[\/=\?\&:]/${map[$MATCH]}}
local PUFILE=$PUDIR/${counter}_$PUFILEMAIN.out
.zinit-any-colorify-as-uspl2 "$uspl"
+zinit-message "Updating $REPLY{…}" >! $PUFILE
.zinit-any-to-user-plugin "$uspl"
local user=${reply[-2]} plugin=${reply[-1]}
.zinit-update-or-status update "$user" "$plugin" &>>! $PUFILE &
PUAssocArray[$!]=$PUFILE
.zinit-wait-for-update-jobs plugins
}
}
# Shouldn't happen
# (( ${#PUAssocArray} > 0 )) && wait ${(k)PUAssocArray}
}
# ]]]
# FUNCTION: .zinit-wait-for-update-jobs [[[
.zinit-wait-for-update-jobs() {
local tpe=$1
if (( counter > OPTS[value] || main_counter == 0 )) {
wait ${(k)PUAssocArray}
local ind_file
for ind_file ( ${^${(von)PUAssocArray}}.ind(DN.) ) {
command cat ${ind_file:r}
(( !OPTS[opt_-d,--debug] && !ZINIT[DEBUG_MODE] )) && \
command rm -f $ind_file
}
(( !OPTS[opt_-d,--debug] && !ZINIT[DEBUG_MODE] )) && \
command rm -f ${(v)PUAssocArray}
counter=0
PUAssocArray=()
} elif (( counter == 1 && !OPTS[opt_-q,--quiet] )) {
+zinit-message "{obj}Spawning the next{num}" \
"${OPTS[value]}{obj} concurrent update jobs" \
"({msg2}${tpe}{obj}){…}{rst}"
}
}
# ]]]
# FUNCTION: .zinit-show-zstatus [[[
# Shows Zinit status, i.e. number of loaded plugins,
# of available completions, etc.
#
# User-action entry point.
.zinit-show-zstatus() {
builtin setopt localoptions nullglob extendedglob nokshglob noksharrays
local infoc="${ZINIT[col-info2]}"
+zinit-message "Zinit's main directory: {file}${ZINIT[HOME_DIR]}{rst}"
+zinit-message "Zinit's binary directory: {file}${ZINIT[BIN_DIR]}{rst}"
+zinit-message "Plugin directory: {file}${ZINIT[PLUGINS_DIR]}{rst}"
+zinit-message "Completions directory: {file}${ZINIT[COMPLETIONS_DIR]}{rst}"
# Without _zlocal/zinit
+zinit-message "Loaded plugins: {num}$(( ${#ZINIT_REGISTERED_PLUGINS[@]} - 1 )){rst}"
# Count light-loaded plugins
integer light=0
local s
for s in "${(@v)ZINIT[(I)STATES__*]}"; do
[[ "$s" = 1 ]] && (( light ++ ))
done
# Without _zlocal/zinit
+zinit-message "Light loaded: {num}$(( light - 1 )){rst}"
# Downloaded plugins, without _zlocal/zinit, custom
typeset -a plugins
plugins=( "${ZINIT[PLUGINS_DIR]}"/*(DN) )
+zinit-message "Downloaded plugins: {num}$(( ${#plugins} - 1 )){rst}"
# Number of enabled completions, with _zlocal/zinit
typeset -a completions
completions=( "${ZINIT[COMPLETIONS_DIR]}"/_[^_.]*~*.zwc(DN) )
+zinit-message "Enabled completions: {num}${#completions[@]}{rst}"
# Number of disabled completions, with _zlocal/zinit
completions=( "${ZINIT[COMPLETIONS_DIR]}"/[^_.]*~*.zwc(DN) )
+zinit-message "Disabled completions: {num}${#completions[@]}{rst}"
# Number of completions existing in all plugins
completions=( "${ZINIT[PLUGINS_DIR]}"/*/**/_[^_.]*~*(*.zwc|*.html|*.txt|*.png|*.jpg|*.jpeg|*.js|*.md|*.yml|*.ri|_zsh_highlight*|/zsdoc/*|*.ps1)(DN) )
+zinit-message "Completions available overall: {num}${#completions[@]}{rst}"
# Enumerate snippets loaded
# }, ${infoc}{rst}", j:, :, {msg}"$'\e[0m, +zinit-message h
+zinit-message -n "Snippets loaded: "
local sni
for sni in ${(onv)ZINIT_SNIPPETS[@]}; do
+zinit-message -n "{url}${sni% <[^>]#>}{rst} ${(M)sni%<[^>]##>}, "
done
[[ -z $sni ]] && builtin print -n " "
builtin print '\b\b '
# Number of compiled plugins
typeset -a matches m
integer count=0
matches=( ${ZINIT[PLUGINS_DIR]}/*/*.zwc(DN) )
local cur_plugin="" uspl1
for m in "${matches[@]}"; do
uspl1="${${m:h}:t}"
if [[ "$cur_plugin" != "$uspl1" ]]; then
(( count ++ ))
cur_plugin="$uspl1"
fi
done
+zinit-message "Compiled plugins: {num}$count{rst}"
} # ]]]
# FUNCTION: .zinit-show-times [[[
# Shows loading times of all loaded plugins.
#
# User-action entry point.
.zinit-show-times() {
builtin emulate -LR zsh ${=${options[xtrace]:#off}:+-o xtrace}
setopt extendedglob warncreateglobal noshortloops
local opt="$1 $2 $3" entry entry2 entry3 user plugin
float -F 3 sum=0.0
local -A sice
local -a tmp
[[ "$opt" = *-[a-z]#m[a-z]#* ]] && \
{ builtin print "Plugin loading moments (relative to the first prompt):"; ((1)); } || \
builtin print "Plugin loading times:"
for entry in "${(@on)ZINIT[(I)TIME_[0-9]##_*]}"; do
entry2="${entry#TIME_[0-9]##_}"
entry3="AT_$entry"
if [[ "$entry2" = (http|https|ftp|ftps|scp|${(~j.|.)${${(k)ZINIT_1MAP}%::}}):* ]]; then
REPLY="${ZINIT[col-pname]}$entry2${ZINIT[col-rst]}"
tmp=( "${(z@)ZINIT_SICE[${entry2%/}]}" )
(( ${#tmp} > 1 && ${#tmp} % 2 == 0 )) && sice=( "${(Q)tmp[@]}" ) || sice=()
else
user="${entry2%%---*}"
plugin="${entry2#*---}"
[[ "$user" = \% ]] && plugin="/${plugin//---/\/}"
[[ "$user" = "$plugin" && "$user/$plugin" != "$entry2" ]] && user=""
.zinit-any-colorify-as-uspl2 "$user" "$plugin"
tmp=( "${(z@)ZINIT_SICE[$user/$plugin]}" )
(( ${#tmp} > 1 && ${#tmp} % 2 == 0 )) && sice=( "${(Q)tmp[@]}" ) || sice=()
fi
local attime=$(( ZINIT[$entry3] - ZINIT[START_TIME] ))
if [[ "$opt" = *-[a-z]#s[a-z]#* ]]; then
local time="$ZINIT[$entry] sec"
attime="${(M)attime#*.???} sec"
else
local time="${(l:5:: :)$(( ZINIT[$entry] * 1000 ))%%[,.]*} ms"
attime="${(l:5:: :)$(( attime * 1000 ))%%[,.]*} ms"
fi
[[ -z $EPOCHREALTIME ]] && attime="<no zsh/datetime module → no time data>"
local line="$time"
if [[ "$opt" = *-[a-z]#m[a-z]#* ]]; then
line="$attime"
elif [[ "$opt" = *-[a-z]#a[a-z]#* ]]; then
line="$attime $line"
fi
line="$line - $REPLY"
if [[ ${sice[as]} == "command" ]]; then
line="$line (command)"
elif [[ -n ${sice[sbin]+abc} ]]; then
line="$line (sbin command)"
elif [[ -n ${sice[fbin]+abc} ]]; then
line="$line (fbin command)"
elif [[ ( ${sice[pick]} = /dev/null || ${sice[as]} = null ) && ${+sice[make]} = 1 ]]; then
line="$line (/dev/null make plugin)"
fi
builtin print "$line"
(( sum += ZINIT[$entry] ))
done
builtin print "Total: $sum sec"
}
# ]]]
# FUNCTION: .zinit-list-bindkeys [[[
.zinit-list-bindkeys() {
local uspl2 uspl2col sw first=1
local -a string_widget
# KSH_ARRAYS immunity
integer correct=0
[[ -o "KSH_ARRAYS" ]] && correct=1
for uspl2 in "${(@ko)ZINIT[(I)BINDKEYS__*]}"; do
[[ -z "${ZINIT[$uspl2]}" ]] && continue
(( !first )) && builtin print
first=0
uspl2="${uspl2#BINDKEYS__}"
.zinit-any-colorify-as-uspl2 "$uspl2"
uspl2col="$REPLY"
builtin print "$uspl2col"
string_widget=( "${(z@)ZINIT[BINDKEYS__$uspl2]}" )
for sw in "${(Oa)string_widget[@]}"; do
[[ -z "$sw" ]] && continue
# Remove one level of quoting to split using (z)
sw="${(Q)sw}"
typeset -a sw_arr
sw_arr=( "${(z@)sw}" )
# Remove one level of quoting to pass to bindkey
local sw_arr1="${(Q)sw_arr[1-correct]}" # Keys
local sw_arr2="${(Q)sw_arr[2-correct]}" # Widget
local sw_arr3="${(Q)sw_arr[3-correct]}" # Optional -M or -A or -N
local sw_arr4="${(Q)sw_arr[4-correct]}" # Optional map name
local sw_arr5="${(Q)sw_arr[5-correct]}" # Optional -R (not with -A, -N)
if [[ "$sw_arr3" = "-M" && "$sw_arr5" != "-R" ]]; then
builtin print "bindkey $sw_arr1 $sw_arr2 ${ZINIT[col-info]}for keymap $sw_arr4${ZINIT[col-rst]}"
elif [[ "$sw_arr3" = "-M" && "$sw_arr5" = "-R" ]]; then
builtin print "${ZINIT[col-info]}range${ZINIT[col-rst]} bindkey $sw_arr1 $sw_arr2 ${ZINIT[col-info]}mapped to $sw_arr4${ZINIT[col-rst]}"
elif [[ "$sw_arr3" != "-M" && "$sw_arr5" = "-R" ]]; then
builtin print "${ZINIT[col-info]}range${ZINIT[col-rst]} bindkey $sw_arr1 $sw_arr2"
elif [[ "$sw_arr3" = "-A" ]]; then
builtin print "Override of keymap \`main'"
elif [[ "$sw_arr3" = "-N" ]]; then
builtin print "New keymap \`$sw_arr4'"
else
builtin print "bindkey $sw_arr1 $sw_arr2"
fi
done
done
}
# ]]]
# FUNCTION: .zinit-compiled [[[
# Displays list of plugins that are compiled.
#
# User-action entry point.
.zinit-compiled() {
builtin setopt localoptions nullglob
typeset -a matches m
matches=( ${ZINIT[PLUGINS_DIR]}/*/*.zwc(DN) )
if [[ "${#matches[@]}" -eq "0" ]]; then
builtin print "No compiled plugins"
return 0
fi
local cur_plugin="" uspl1 file user plugin
for m in "${matches[@]}"; do
file="${m:t}"
uspl1="${${m:h}:t}"
.zinit-any-to-user-plugin "$uspl1"
user="${reply[-2]}" plugin="${reply[-1]}"
if [[ "$cur_plugin" != "$uspl1" ]]; then
[[ -n "$cur_plugin" ]] && builtin print # newline
.zinit-any-colorify-as-uspl2 "$user" "$plugin"
builtin print -r -- "$REPLY:"
cur_plugin="$uspl1"
fi
builtin print "$file"
done
} # ]]]
# FUNCTION: .zinit-compile-uncompile-all [[[
# Compiles or uncompiles all existing (on disk) plugins.
#
# User-action entry point.
.zinit-compile-uncompile-all() {
builtin setopt localoptions nullglob
local compile="$1"
typeset -a plugins
plugins=( "${ZINIT[PLUGINS_DIR]}"/*(DN) )
local p user plugin
for p in "${plugins[@]}"; do
[[ "${p:t}" = "custom" || "${p:t}" = "_local---zinit" ]] && continue
.zinit-any-to-user-plugin "${p:t}"
user="${reply[-2]}" plugin="${reply[-1]}"
.zinit-any-colorify-as-uspl2 "$user" "$plugin"
builtin print -r -- "$REPLY:"
if [[ "$compile" = "1" ]]; then
.zinit-compile-plugin "$user" "$plugin"
else
.zinit-uncompile-plugin "$user" "$plugin" "1"
fi
done
} # ]]]
# FUNCTION: .zinit-uncompile-plugin [[[
# Uncompiles given plugin.
#
# User-action entry point.
#
# $1 - plugin spec (4 formats: user---plugin, user/plugin, user (+ plugin in $2), plugin)
# $2 - plugin (only when $1 - i.e. user - given)
.zinit-uncompile-plugin() {
builtin setopt localoptions nullglob
.zinit-any-to-user-plugin "$1" "$2"
local user="${reply[-2]}" plugin="${reply[-1]}" silent="$3"
# There are plugins having ".plugin.zsh"
# in ${plugin} directory name, also some
# have ".zsh" there
[[ "$user" = "%" ]] && local pdir_path="$plugin" || local pdir_path="${ZINIT[PLUGINS_DIR]}/${user:+${user}---}${plugin//\//---}"
typeset -a matches m
matches=( $pdir_path/*.zwc(DN) )
if [[ "${#matches[@]}" -eq "0" ]]; then
if [[ "$silent" = "1" ]]; then
builtin print "not compiled"
else
.zinit-any-colorify-as-uspl2 "$user" "$plugin"
builtin print -r -- "$REPLY not compiled"
fi
return 1
fi
for m in "${matches[@]}"; do
builtin print "Removing ${ZINIT[col-info]}${m:t}${ZINIT[col-rst]}"
command rm -f "$m"
done
} # ]]]
# FUNCTION: .zinit-show-completions [[[
# Display installed (enabled and disabled), completions. Detect
# stray and improper ones.
#
# Completions live even when plugin isn't loaded - if they are
# installed and enabled.
#
# User-action entry point.
.zinit-show-completions() {
builtin setopt localoptions nullglob extendedglob nokshglob noksharrays
local count="${1:-3}"
typeset -a completions
completions=( "${ZINIT[COMPLETIONS_DIR]}"/_[^_.]*~*.zwc "${ZINIT[COMPLETIONS_DIR]}"/[^_.]*~*.zwc )
local cpath c o s group
# Prepare readlink command for establishing
# completion's owner
.zinit-prepare-readlink
local rdlink="$REPLY"
float flmax=${#completions} flcur=0
typeset -F1 flper
local -A owner_to_group
local -a packs splitted
integer disabled unknown stray
for cpath in "${completions[@]}"; do
c="${cpath:t}"
[[ "${c#_}" = "${c}" ]] && disabled=1 || disabled=0
c="${c#_}"
# This will resolve completion's symlink to obtain
# information about the repository it comes from, i.e.
# about user and plugin, taken from directory name
.zinit-get-completion-owner "$cpath" "$rdlink"
[[ "$REPLY" = "[unknown]" ]] && unknown=1 || unknown=0
o="$REPLY"
# If we successfully read a symlink (unknown == 0), test if it isn't broken
stray=0
if (( unknown == 0 )); then
[[ ! -f "$cpath" ]] && stray=1
fi
s=$(( 1*disabled + 2*unknown + 4*stray ))
owner_to_group[${o}--$s]+="$c;"
group="${owner_to_group[${o}--$s]%;}"
splitted=( "${(s:;:)group}" )
if [[ "${#splitted}" -ge "$count" ]]; then
packs+=( "${(q)group//;/, } ${(q)o} ${(q)s}" )
unset "owner_to_group[${o}--$s]"
fi
(( ++ flcur ))
flper=$(( flcur / flmax * 100 ))
builtin print -u 2 -n -- "\r${flper}% "
done
for o in "${(k)owner_to_group[@]}"; do
group="${owner_to_group[$o]%;}"
s="${o##*--}"
o="${o%--*}"
packs+=( "${(q)group//;/, } ${(q)o} ${(q)s}" )
done
packs=( "${(on)packs[@]}" )
builtin print -u 2 # newline after percent
# Find longest completion name
integer longest=0
local -a unpacked
for c in "${packs[@]}"; do
unpacked=( "${(Q@)${(z@)c}}" )
[[ "${#unpacked[1]}" -gt "$longest" ]] && longest="${#unpacked[1]}"
done
for c in "${packs[@]}"; do
unpacked=( "${(Q@)${(z@)c}}" ) # TODO: ${(Q)${(z@)c}[@]} ?
.zinit-any-colorify-as-uspl2 "$unpacked[2]"
builtin print -n "${(r:longest+1:: :)unpacked[1]} $REPLY"
(( unpacked[3] & 0x1 )) && builtin print -n " ${ZINIT[col-error]}[disabled]${ZINIT[col-rst]}"
(( unpacked[3] & 0x2 )) && builtin print -n " ${ZINIT[col-error]}[unknown file, clean with cclear]${ZINIT[col-rst]}"
(( unpacked[3] & 0x4 )) && builtin print -n " ${ZINIT[col-error]}[stray, clean with cclear]${ZINIT[col-rst]}"
builtin print
done
} # ]]]
# FUNCTION: .zinit-clear-completions [[[
# Delete stray and improper completions.
#
# Completions live even when plugin isn't loaded - if they are
# installed and enabled.
#
# User-action entry point.
.zinit-clear-completions() {
builtin setopt localoptions nullglob extendedglob nokshglob noksharrays
typeset -a completions
completions=( "${ZINIT[COMPLETIONS_DIR]}"/_[^_.]*~*.zwc "${ZINIT[COMPLETIONS_DIR]}"/[^_.]*~*.zwc )
# Find longest completion name
local cpath c
integer longest=0
for cpath in "${completions[@]}"; do
c="${cpath:t}"
c="${c#_}"
[[ "${#c}" -gt "$longest" ]] && longest="${#c}"
done
.zinit-prepare-readlink
local rdlink="$REPLY"
integer disabled unknown stray
for cpath in "${completions[@]}"; do
c="${cpath:t}"
[[ "${c#_}" = "${c}" ]] && disabled=1 || disabled=0
c="${c#_}"
# This will resolve completion's symlink to obtain
# information about the repository it comes from, i.e.
# about user and plugin, taken from directory name
.zinit-get-completion-owner "$cpath" "$rdlink"
[[ "$REPLY" = "[unknown]" ]] && unknown=1 || unknown=0
.zinit-any-colorify-as-uspl2 "$REPLY"
# If we successfully read a symlink (unknown == 0), test if it isn't broken
stray=0
if (( unknown == 0 )); then
[[ ! -f "$cpath" ]] && stray=1
fi
if (( unknown == 1 || stray == 1 )); then
builtin print -n "Removing completion: ${(r:longest+1:: :)c} $REPLY"
(( disabled )) && builtin print -n " ${ZINIT[col-error]}[disabled]${ZINIT[col-rst]}"
(( unknown )) && builtin print -n " ${ZINIT[col-error]}[unknown file]${ZINIT[col-rst]}"
(( stray )) && builtin print -n " ${ZINIT[col-error]}[stray]${ZINIT[col-rst]}"
builtin print
command rm -f "$cpath"
fi
done
} # ]]]
# FUNCTION: .zinit-search-completions [[[
# While .zinit-show-completions() shows what completions are
# installed, this functions searches through all plugin dirs
# showing what's available in general (for installation).
#
# User-action entry point.
.zinit-search-completions() {
builtin setopt localoptions nullglob extendedglob nokshglob noksharrays
typeset -a plugin_paths
plugin_paths=( "${ZINIT[PLUGINS_DIR]}"/*(DN) )
# Find longest plugin name. Things are ran twice here, first pass
# is to get longest name of plugin which is having any completions
integer longest=0
typeset -a completions
local pp
for pp in "${plugin_paths[@]}"; do
completions=( "$pp"/**/_[^_.]*~*(*.zwc|*.html|*.txt|*.png|*.jpg|*.jpeg|*.js|*.md|*.yml|*.ri|_zsh_highlight*|/zsdoc/*|*.ps1)(DN^/) )
if [[ "${#completions[@]}" -gt 0 ]]; then
local pd="${pp:t}"
[[ "${#pd}" -gt "$longest" ]] && longest="${#pd}"
fi
done
builtin print "${ZINIT[col-info]}[+]${ZINIT[col-rst]} is installed, ${ZINIT[col-p]}[-]${ZINIT[col-rst]} uninstalled, ${ZINIT[col-error]}[+-]${ZINIT[col-rst]} partially installed"
local c
for pp in "${plugin_paths[@]}"; do
completions=( "$pp"/**/_[^_.]*~*(*.zwc|*.html|*.txt|*.png|*.jpg|*.jpeg|*.js|*.md|*.yml|*.ri|_zsh_highlight*|/zsdoc/*|*.ps1)(DN^/) )
if [[ "${#completions[@]}" -gt 0 ]]; then
# Array of completions, e.g. ( _cp _xauth )
completions=( "${completions[@]:t}" )
# Detect if the completions are installed
integer all_installed="${#completions[@]}"
for c in "${completions[@]}"; do
if [[ -e "${ZINIT[COMPLETIONS_DIR]}/$c" || -e "${ZINIT[COMPLETIONS_DIR]}/${c#_}" ]]; then
(( all_installed -- ))
fi
done
if [[ "$all_installed" -eq "${#completions[@]}" ]]; then
builtin print -n "${ZINIT[col-p]}[-]${ZINIT[col-rst]} "
elif [[ "$all_installed" -eq "0" ]]; then
builtin print -n "${ZINIT[col-info]}[+]${ZINIT[col-rst]} "
else
builtin print -n "${ZINIT[col-error]}[+-]${ZINIT[col-rst]} "
fi
# Convert directory name to colorified $user/$plugin
.zinit-any-colorify-as-uspl2 "${pp:t}"
# Adjust for escape code (nasty, utilizes fact that
# ${ZINIT[col-rst]} is used twice, so as a $ZINIT_COL)
integer adjust_ec=$(( ${#ZINIT[col-rst]} * 2 + ${#ZINIT[col-uname]} + ${#ZINIT[col-pname]} ))
builtin print "${(r:longest+adjust_ec:: :)REPLY} ${(j:, :)completions}"
fi
done
} # ]]]
# FUNCTION: .zinit-cenable [[[
# Disables given installed completion.
#
# User-action entry point.
#
# $1 - e.g. "_mkdir" or "mkdir"
.zinit-cenable() {
local c="$1"
c="${c#_}"
local cfile="${ZINIT[COMPLETIONS_DIR]}/_${c}"
local bkpfile="${cfile:h}/$c"
if [[ ! -e "$cfile" && ! -e "$bkpfile" ]]; then
builtin print "${ZINIT[col-error]}No such completion \`$c'${ZINIT[col-rst]}"
return 1
fi
# Check if there is no backup file
# This is treated as if the completion is already enabled
if [[ ! -e "$bkpfile" ]]; then
builtin print "Completion ${ZINIT[col-info]}$c${ZINIT[col-rst]} already enabled"
.zinit-check-comp-consistency "$cfile" "$bkpfile" 0
return 1
fi
# Disabled, but completion file already exists?
if [[ -e "$cfile" ]]; then
builtin print "${ZINIT[col-error]}Warning: completion's file \`${cfile:t}' exists, will overwrite${ZINIT[col-rst]}"
builtin print "${ZINIT[col-error]}Completion is actually enabled and will re-enable it again${ZINIT[col-rst]}"
.zinit-check-comp-consistency "$cfile" "$bkpfile" 1
command rm -f "$cfile"
else
.zinit-check-comp-consistency "$cfile" "$bkpfile" 0
fi
# Enable
command mv "$bkpfile" "$cfile" # move completion's backup file created when disabling
# Prepare readlink command for establishing completion's owner
.zinit-prepare-readlink
# Get completion's owning plugin
.zinit-get-completion-owner-uspl2col "$cfile" "$REPLY"
builtin print "Enabled ${ZINIT[col-info]}$c${ZINIT[col-rst]} completion belonging to $REPLY"
return 0
} # ]]]
# FUNCTION: .zinit-cdisable [[[
# Enables given installed completion.
#
# User-action entry point.
#
# $1 - e.g. "_mkdir" or "mkdir"
.zinit-cdisable() {
local c="$1"
c="${c#_}"
local cfile="${ZINIT[COMPLETIONS_DIR]}/_${c}"
local bkpfile="${cfile:h}/$c"
if [[ ! -e "$cfile" && ! -e "$bkpfile" ]]; then
builtin print "${ZINIT[col-error]}No such completion \`$c'${ZINIT[col-rst]}"
return 1
fi
# Check if it's already disabled
# Not existing "$cfile" says that
if [[ ! -e "$cfile" ]]; then
builtin print "Completion ${ZINIT[col-info]}$c${ZINIT[col-rst]} already disabled"
.zinit-check-comp-consistency "$cfile" "$bkpfile" 0
return 1
fi
# No disable, but bkpfile exists?
if [[ -e "$bkpfile" ]]; then
builtin print "${ZINIT[col-error]}Warning: completion's backup file \`${bkpfile:t}' already exists, will overwrite${ZINIT[col-rst]}"
.zinit-check-comp-consistency "$cfile" "$bkpfile" 1
command rm -f "$bkpfile"
else
.zinit-check-comp-consistency "$cfile" "$bkpfile" 0
fi
# Disable
command mv "$cfile" "$bkpfile"
# Prepare readlink command for establishing completion's owner
.zinit-prepare-readlink
# Get completion's owning plugin
.zinit-get-completion-owner-uspl2col "$bkpfile" "$REPLY"
builtin print "Disabled ${ZINIT[col-info]}$c${ZINIT[col-rst]} completion belonging to $REPLY"
return 0
} # ]]]
# FUNCTION: .zinit-cd [[[
# Jumps to plugin's directory (in Zinit's home directory).
#
# User-action entry point.
#
# $1 - plugin spec (4 formats: user---plugin, user/plugin, user, plugin)
# $2 - plugin (only when $1 - i.e. user - given)
.zinit-cd() {
builtin emulate -LR zsh ${=${options[xtrace]:#off}:+-o xtrace}
builtin setopt extendedglob warncreateglobal typesetsilent rcquotes
.zinit-get-path "$1" "$2" && {
if [[ -e $REPLY ]]; then
builtin pushd $REPLY
else
+zinit-message "No such plugin or snippet"
return 1
fi
builtin print
} || {
+zinit-message "No such plugin or snippet"
return 1
}
} # ]]]
# FUNCTION: .zinit-run-delete-hooks [[[
.zinit-run-delete-hooks() {
if [[ -n ${ICE[atdelete]} ]]; then
.zinit-countdown "atdelete" && ( (( ${+ICE[nocd]} == 0 )) && \
{ builtin cd -q "$5" && eval "${ICE[atdelete]}"; ((1)); } || \
eval "${ICE[atdelete]}" )
fi
local -a arr
local key
# Run annexes' atdelete hooks
reply=(
${(on)ZINIT_EXTS2[(I)zinit hook:atdelete-pre <->]}
${(on)ZINIT_EXTS[(I)z-annex hook:atdelete-<-> <->]}
${(on)ZINIT_EXTS2[(I)zinit hook:atdelete-post <->]}
)
for key in "${reply[@]}"; do
arr=( "${(Q)${(z@)ZINIT_EXTS[$key]:-$ZINIT_EXTS2[$key]}[@]}" )
"${arr[5]}" "$1" "$2" $3 "$4" "$5" "${${key##(zinit|z-annex) hook:}%% <->}" delete:TODO
done
}
# ]]]
# FUNCTION: .zinit-delete [[[
# Deletes plugin's or snippet's directory (in Zinit's home directory).
#
# User-action entry point.
#
# $1 - snippet URL or plugin spec (4 formats: user---plugin, user/plugin, user, plugin)
# $2 - plugin (only when $1 - i.e. user - given)
.zinit-delete() {
builtin emulate -LR zsh ${=${options[xtrace]:#off}:+-o xtrace}
setopt extendedglob warncreateglobal typesetsilent
local -a opts match mbegin mend
local MATCH; integer MBEGIN MEND _retval
# Parse options
.zinit-parse-opts delete "$@"
builtin set -- "${reply[@]}"
if (( $@[(I)-*] || OPTS[opt_-h,--help] )) { +zinit-prehelp-usage-message delete $___opt_map[delete] $@; return 1; }
local the_id="$1${${1:#(%|/)*}:+${2:+/}}$2"
# -a/--all given?
if (( OPTS[opt_-a,--all] )); then
.zinit-confirm "Prune all plugins in \`${ZINIT[PLUGINS_DIR]}'"\
"and snippets in \`${ZINIT[SNIPPETS_DIR]}'?" \
"command rm -rf ${${ZINIT[PLUGINS_DIR]%%[/[:space:]]##}:-${TMPDIR:-${TMPDIR:-/tmp}}/abcEFG312}/*~*/_local---zinit(ND) "\
"${${ZINIT[SNIPPETS_DIR]%%[/[:space:]]##}:-${TMPDIR:-${TMPDIR:-/tmp}}/abcEFG312}/*~*/plugins(ND)"
return $?
fi
# -c/--clean given?
if (( OPTS[opt_-c,--clean] )) {
.zinit-confirm "Prune ${ZINIT[col-info]}CURRENTLY NOT LOADED${ZINIT[col-rst]}"\
" plugins in $ZINIT[col-file]$ZINIT[PLUGINS_DIR]%f%b"\
" and snippets in $ZINIT[col-file]$ZINIT[SNIPPETS_DIR]%f%b?" \
" # Delete unloaded snippets
local -aU loadedsnips todelete final_todelete
loadedsnips=( \${\${ZINIT_SNIPPETS[@]% <*>}/(#m)*/\$(.zinit-get-object-path snippet \"\$MATCH\" && builtin print -rn \$REPLY; )} )
local dir=\${\${ZINIT[SNIPPETS_DIR]%%[/[:space:]]##}:-${TMPDIR:-${TMPDIR:-/tmp}}/xyzcba231}
todelete=( \$dir/*/*/*(ND/) \$dir/*/*(ND/) \$dir/*(ND/) )
final_todelete=( \${todelete[@]:#*/(\${(~j:|:)loadedsnips}|*/plugins|._backup|._zinit|.svn|.git)(|/*)} )
final_todelete=( \${final_todelete[@]//(#m)*/\$( .zinit-get-object-path snippet \"\${\${\${MATCH##\${dir}[/[:space:]]#}/(#i)(#b)(http(s|)|ftp(s|)|ssh|rsync)--/\${match[1]##--}://}//--//}\" && builtin print -r -- \$REPLY)} )
final_todelete=( \${final_todelete[@]:#(\${(~j:|:)loadedsnips}|*/plugins|*/._backup|*/._zinit|*/.svn|*/.git)(|/*)} )
todelete=( \${\${\${(@)\${(@)final_todelete##\$dir/#}//(#i)(#m)(http(s|)|ftp(s|)|ssh|rsync)--/\${MATCH%--}://}//--//}//(#b)(*)\/([^\/]##)(#e)/\$match[1]/\$ZINIT[col-file]\$match[2]\$ZINIT[col-rst]} )
todelete=( \${todelete[@]//(#m)(#s)[^\/]##(#e)/\$ZINIT[col-file]\$MATCH\$ZINIT[col-rst]} )
final_todelete=( \${\${\${(@)\${(@)final_todelete##\$dir/#}//(#i)(#m)(http(s|)|ftp(s|)|ssh|rsync)--/\${MATCH%--}://}//--//}//(#b)(*)\/([^\/]##)(#e)/\$match[1]/\$match[2]} )
builtin print; print -Prln \"\$ZINIT[col-obj]Deleting the following \"\
\"\$ZINIT[col-file]\${#todelete}\$ZINIT[col-msg2] UNLOADED\$ZINIT[col-obj] snippets:%f%b\" \
\$todelete \"%f%b\"
sleep 3
local snip
for snip ( \$final_todelete ) { zinit delete -q -y \$snip; _retval+=\$?; }
builtin print -Pr \"\$ZINIT[col-obj]Done (with the exit code: \$_retval).%f%b\"
# Next delete unloaded plugins
local -a dirs
dirs=( \${\${ZINIT[PLUGINS_DIR]%%[/[:space:]]##}:-${TMPDIR:-${TMPDIR:-/tmp}}/abcEFG312}/*~*/(\${(~j:|:)\${ZINIT_REGISTERED_PLUGINS[@]//\//---}})(ND/) )
dirs=( \${(@)\${dirs[@]##\$ZINIT[PLUGINS_DIR]/#}//---//} )
builtin print -Prl \"\" \"\$ZINIT[col-obj]Deleting the following \"\
\"\$ZINIT[col-file]\${#dirs}\$ZINIT[col-msg2] UNLOADED\$ZINIT[col-obj] plugins:%f%b\" \
\${\${dirs//(#b)(*)(\/([^\/]##))(#e)/\${\${match[2]:+\$ZINIT[col-uname]\$match[1]\$ZINIT[col-rst]/\$ZINIT[col-pname]\$match[3]\$ZINIT[col-rst]}:-\$ZINIT[col-pname]\$match[1]}}//(#b)(^\$ZINIT[col-uname])(*)/\$ZINIT[col-pname]\$match[1]}
sleep 3
for snip ( \$dirs ) { zinit delete -q -y \$snip; _retval+=\$?; }
builtin print -Pr \"\$ZINIT[col-obj]Done (with the exit code: \$_retval).%f%b\""
return _retval
}
local -A ICE2
local local_dir filename is_snippet
.zinit-compute-ice "$the_id" "pack" \
ICE2 local_dir filename is_snippet || return 1
if [[ "$local_dir" != /* ]]
then
builtin print "Obtained a risky, not-absolute path ($local_dir), aborting"
return 1
fi
ICE2[teleid]="${ICE2[teleid]:-${ICE2[id-as]}}"
local -a files
files=( "$local_dir"/*.(zsh|sh|bash|ksh)(DN:t)
"$local_dir"/*(*DN:t) "$local_dir"/*(@DN:t) "$local_dir"/*(.DN:t)
"$local_dir"/*~*/.(_zinit|svn|git)(/DN:t) "$local_dir"/*(=DN:t)
"$local_dir"/*(pDN:t) "$local_dir"/*(%DN:t)
)
(( !${#files} )) && files=( "no files?" )
files=( ${(@)files[1,4]} ${files[4]+more…} )
# Make the ices available for the hooks.
local -A ICE
ICE=( "${(kv)ICE2[@]}" )
if (( is_snippet )); then
if [[ "${+ICE2[svn]}" = "1" ]] {
if [[ -e "$local_dir" ]]
then
.zinit-confirm "Delete $local_dir? (it holds: ${(j:, :)${(@u)files}})" \
".zinit-run-delete-hooks snippet \"${ICE2[teleid]}\" \"\" \"$the_id\" \
\"$local_dir\"; \
command rm -rf ${(q)${${local_dir:#[/[:space:]]##}:-${TMPDIR:-${TMPDIR:-/tmp}}/abcYZX321}}"
else
builtin print "No such snippet"
return 1
fi
} else {
if [[ -e "$local_dir" ]]; then
.zinit-confirm "Delete $local_dir? (it holds: ${(j:, :)${(@u)files}})" \
".zinit-run-delete-hooks snippet \"${ICE2[teleid]}\" \"\" \"$the_id\" \
\"$local_dir\"; command rm -rf \
${(q)${${local_dir:#[/[:space:]]##}:-${TMPDIR:-${TMPDIR:-/tmp}}/abcYZX321}}"
else
builtin print "No such snippet"
return 1
fi
}
else
.zinit-any-to-user-plugin "${ICE2[teleid]}"
if [[ -e "$local_dir" ]]; then
.zinit-confirm "Delete $local_dir? (it holds: ${(j:, :)${(@u)files}})" \
".zinit-run-delete-hooks plugin \"${reply[-2]}\" \"${reply[-1]}\" \"$the_id\" \
\"$local_dir\"; \
command rm -rf ${(q)${${local_dir:#[/[:space:]]##}:-${TMPDIR:-${TMPDIR:-/tmp}}/abcYZX321}}"
else
builtin print -r -- "No such plugin or snippet"
return 1
fi
fi
return 0
} # ]]]
# FUNCTION: .zinit-confirm [[[
# Prints given question, waits for "y" key, evals
# given expression if "y" obtained
#
# $1 - question
# $2 - expression
.zinit-confirm() {
if (( OPTS[opt_-y,--yes] )); then
integer retval
eval "$2"; retval=$?
(( OPTS[opt_-q,--quiet] )) || builtin print "\nDone (action executed, exit code: $retval)"
else
builtin print -Pr -- "$1"
builtin print "[yY/n…]"
local ans
if [[ -t 0 ]] {
read -q ans
} else {
read -k1 -u0 ans
}
if [[ "$ans" = "y" ]] {
eval "$2"
builtin print "\nDone (action executed, exit code: $?)"
} else {
builtin print "\nBreak, no action"
return 1
}
fi
return 0
}
# ]]]
# FUNCTION: .zinit-changes [[[
# Shows `git log` of given plugin.
#
# User-action entry point.
#
# $1 - plugin spec (4 formats: user---plugin, user/plugin, user, plugin)
# $2 - plugin (only when $1 - i.e. user - given)
.zinit-changes() {
.zinit-any-to-user-plugin "$1" "$2"
local user="${reply[-2]}" plugin="${reply[-1]}"
.zinit-exists-physically-message "$user" "$plugin" || return 1
(
builtin cd -q "${ZINIT[PLUGINS_DIR]}/${user:+${user}---}${plugin//\//---}" && \
command git log -p --graph --decorate --date=relative -C -M
)
} # ]]]
# FUNCTION: .zinit-recently [[[
# Shows plugins that obtained commits in specified past time.
#
# User-action entry point.
#
# $1 - time spec, e.g. "1 week"
.zinit-recently() {
builtin emulate -LR zsh ${=${options[xtrace]:#off}:+-o xtrace}
builtin setopt nullglob extendedglob warncreateglobal \
typesetsilent noshortloops
local IFS=.
local gitout
local timespec=${*// ##/.}
timespec=${timespec//.##/.}
[[ -z $timespec ]] && timespec=1.week
typeset -a plugins
plugins=( ${ZINIT[PLUGINS_DIR]}/*(DN-/) )
local p uspl1
for p in ${plugins[@]}; do
uspl1=${p:t}
[[ $uspl1 = custom || $uspl1 = _local---zinit ]] && continue
pushd "$p" >/dev/null || continue
if [[ -d .git ]]; then
gitout=`command git log --all --max-count=1 --since=$timespec 2>/dev/null`
if [[ -n $gitout ]]; then
.zinit-any-colorify-as-uspl2 "$uspl1"
builtin print -r -- "$REPLY"
fi
fi
popd >/dev/null
done
} # ]]]
# FUNCTION: .zinit-create [[[
# Creates a plugin, also on Github (if not "_local/name" plugin).
#
# User-action entry point.
#
# $1 - (optional) plugin spec (4 formats: user---plugin, user/plugin, user, plugin)
# $2 - (optional) plugin (only when $1 - i.e. user - given)
.zinit-create() {
builtin emulate -LR zsh ${=${options[xtrace]:#off}:+-o xtrace}
setopt localoptions extendedglob warncreateglobal typesetsilent \
noshortloops rcquotes
.zinit-any-to-user-plugin "$1" "$2"
local user="${reply[-2]}" plugin="${reply[-1]}"
if (( ${+commands[curl]} == 0 || ${+commands[git]} == 0 )); then
builtin print "${ZINIT[col-error]}curl and git are needed${ZINIT[col-rst]}"
return 1
fi
# Read whether to create under organization
local isorg
vared -cp 'Create under an organization? (y/n): ' isorg
if [[ $isorg = (y|yes) ]]; then
local org="$user"
vared -cp "Github organization name: " org
fi
# Read user
local compcontext="user:User Name:(\"$USER\" \"$user\")"
vared -cp "Github user name or just \"_local\" (or leave blank, for an userless plugin): " user
# Read plugin
unset compcontext
vared -cp 'Plugin name: ' plugin
if [[ "$plugin" = "_unknown" ]]; then
builtin print "${ZINIT[col-error]}No plugin name entered${ZINIT[col-rst]}"
return 1
fi
plugin="${plugin//[^a-zA-Z0-9_]##/-}"
.zinit-any-colorify-as-uspl2 "${${${(M)isorg:#(y|yes)}:+$org}:-$user}" "$plugin"
local uspl2col="$REPLY"
builtin print "Plugin is $uspl2col"
if .zinit-exists-physically "${${${(M)isorg:#(y|yes)}:+$org}:-$user}" "$plugin"; then
builtin print "${ZINIT[col-error]}Repository${ZINIT[col-rst]} $uspl2col ${ZINIT[col-error]}already exists locally${ZINIT[col-rst]}"
return 1
fi
builtin cd -q "${ZINIT[PLUGINS_DIR]}"
if [[ "$user" != "_local" && -n "$user" ]]; then
builtin print "${ZINIT[col-info]}Creating Github repository${ZINIT[col-rst]}"
if [[ $isorg = (y|yes) ]]; then
curl --tcp-fastopen --silent -u "$user" https://api.github.com/orgs/$org/repos -d '{"name":"'"$plugin"'"}' >/dev/null
else
curl --tcp-fastopen --silent -u "$user" https://api.github.com/user/repos -d '{"name":"'"$plugin"'"}' >/dev/null
fi
command git clone "https://github.com/${${${(M)isorg:#(y|yes)}:+$org}:-$user}/${plugin}.git" "${${${(M)isorg:#(y|yes)}:+$org}:-$user}---${plugin//\//---}" || {
builtin print "${ZINIT[col-error]}Creation of remote repository $uspl2col ${ZINIT[col-error]}failed${ZINIT[col-rst]}"
builtin print "${ZINIT[col-error]}Bad credentials?${ZINIT[col-rst]}"
return 1
}
builtin cd -q "${${${(M)isorg:#(y|yes)}:+$org}:-$user}---${plugin//\//---}"
command git config credential.https://github.com.username "${user}"
else
builtin print "${ZINIT[col-info]}Creating local git repository${${user:+.}:-, ${ZINIT[col-pname]}free-style, without the \"_local/\" part${ZINIT[col-info]}.}${ZINIT[col-rst]}"
command mkdir "${user:+${user}---}${plugin//\//---}"
builtin cd -q "${user:+${user}---}${plugin//\//---}"
command git init || {
builtin print "Git repository initialization failed, aborting"
return 1
}
fi
local user_name="$(command git config user.name 2>/dev/null)"
local year="${$(command date "+%Y"):-2020}"
command cat >! "${plugin:t}.plugin.zsh" <<EOF
# -*- mode: sh; sh-indentation: 4; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# Copyright (c) $year $user_name
# According to the Zsh Plugin Standard:
# https://zdharma-continuum.github.io/Zsh-100-Commits-Club/Zsh-Plugin-Standard.html
0=\${\${ZERO:-\${0:#\$ZSH_ARGZERO}}:-\${(%):-%N}}
0=\${\${(M)0:#/*}:-\$PWD/\$0}
# Then \${0:h} to get plugin's directory
if [[ \${zsh_loaded_plugins[-1]} != */${plugin:t} && -z \${fpath[(r)\${0:h}]} ]] {
fpath+=( "\${0:h}" )
}
# Standard hash for plugins, to not pollute the namespace
typeset -gA Plugins
Plugins[${${(U)plugin:t}//-/_}_DIR]="\${0:h}"
autoload -Uz template-script
# Use alternate vim marks [[[ and ]]] as the original ones can
# confuse nested substitutions, e.g.: \${\${\${VAR}}}
# vim:ft=zsh:tw=80:sw=4:sts=4:et:foldmarker=[[[,]]]
EOF
builtin print -r -- "# $plugin" >! "README.md"
command cp -vf "${ZINIT[BIN_DIR]}/LICENSE" LICENSE
command cp -vf "${ZINIT[BIN_DIR]}/share/template-plugin/zsh.gitignore" .gitignore
command cp -vf "${ZINIT[BIN_DIR]}/share/template-plugin/template-script" .
command sed -i -e "s/MY_PLUGIN_DIR/${${(U)plugin:t}//-/_}_DIR/g" template-script
command sed -i -e "s/USER_NAME/$user_name/g" template-script
command sed -i -e "s/YEAR/$year/g" template-script
if [[ "$user" != "_local" && -n "$user" ]]; then
builtin print "Your repository is ready\!"
builtin print "An MIT LICENSE file has been placed - please review the " \
"license terms to see if they fit your new project:"
builtin print "- https://choosealicense.com/"
builtin print "Remote repository $uspl2col set up as origin."
builtin print "You're in plugin's local folder, the files aren't added to git."
builtin print "Your next step after commiting will be:"
builtin print "git push -u origin master (or \`… -u origin main')"
else
builtin print "Created local $uspl2col plugin."
builtin print "You're in plugin's repository folder, the files aren't added to git."
fi
} # ]]]
# FUNCTION: .zinit-glance [[[
# Shows colorized source code of plugin. Is able to use pygmentize,
# highlight, GNU source-highlight.
#
# User-action entry point.
#
# $1 - plugin spec (4 formats: user---plugin, user/plugin, user, plugin)
# $2 - plugin (only when $1 - i.e. user - given)
.zinit-glance() {
.zinit-any-to-user-plugin "$1" "$2"
local user="${reply[-2]}" plugin="${reply[-1]}"
.zinit-exists-physically-message "$user" "$plugin" || return 1
.zinit-first "$1" "$2" || {
builtin print "${ZINIT[col-error]}No source file found, cannot glance${ZINIT[col-rst]}"
return 1
}
local fname="${reply[-1]}"
integer has_256_colors=0
[[ "$TERM" = xterm* || "$TERM" = "screen" ]] && has_256_colors=1
{
if (( ${+commands[pygmentize]} )); then
builtin print "Glancing with ${ZINIT[col-info]}pygmentize${ZINIT[col-rst]}"
pygmentize -l bash -g "$fname"
elif (( ${+commands[highlight]} )); then
builtin print "Glancing with ${ZINIT[col-info]}highlight${ZINIT[col-rst]}"
if (( has_256_colors )); then
highlight -q --force -S sh -O xterm256 "$fname"
else
highlight -q --force -S sh -O ansi "$fname"
fi
elif (( ${+commands[source-highlight]} )); then
builtin print "Glancing with ${ZINIT[col-info]}source-highlight${ZINIT[col-rst]}"
source-highlight -fesc --failsafe -s zsh -o STDOUT -i "$fname"
else
cat "$fname"
fi
} | {
if [[ -t 1 ]]; then
.zinit-pager
else
cat
fi
}
} # ]]]
# FUNCTION: .zinit-edit [[[
# Runs $EDITOR on source of given plugin. If the variable is not
# set then defaults to `vim'.
#
# User-action entry point.
#
# $1 - plugin spec (4 formats: user---plugin, user/plugin, user, plugin)
# $2 - plugin (only when $1 - i.e. user - given)
.zinit-edit() {
local -A ICE2
local local_dir filename is_snippet the_id="$1${${1:#(%|/)*}:+${2:+/}}$2"
.zinit-compute-ice "$the_id" "pack" \
ICE2 local_dir filename is_snippet || return 1
ICE2[teleid]="${ICE2[teleid]:-${ICE2[id-as]}}"
if (( is_snippet )); then
if [[ ! -e "$local_dir" ]]; then
builtin print "No such snippet"
return 1
fi
else
if [[ ! -e "$local_dir" ]]; then
builtin print -r -- "No such plugin or snippet"
return 1
fi
fi
"${EDITOR:-vim}" "$local_dir"
return 0
} # ]]]
# FUNCTION: .zinit-stress [[[
# Compiles plugin with various options on and off to see
# how well the code is written. The options are:
#
# NO_SHORT_LOOPS, IGNORE_BRACES, IGNORE_CLOSE_BRACES, SH_GLOB,
# CSH_JUNKIE_QUOTES, NO_MULTI_FUNC_DEF.
#
# User-action entry point.
#
# $1 - plugin spec (4 formats: user---plugin, user/plugin, user, plugin)
# $2 - plugin (only when $1 - i.e. user - given)
.zinit-stress() {
.zinit-any-to-user-plugin "$1" "$2"
local user="${reply[-2]}" plugin="${reply[-1]}"
.zinit-exists-physically-message "$user" "$plugin" || return 1
.zinit-first "$1" "$2" || {
builtin print "${ZINIT[col-error]}No source file found, cannot stress${ZINIT[col-rst]}"
return 1
}
local pdir_path="${reply[-2]}" fname="${reply[-1]}"
integer compiled=1
[[ -e "${fname}.zwc" ]] && command rm -f "${fname}.zwc" || compiled=0
local -a ZINIT_STRESS_TEST_OPTIONS
ZINIT_STRESS_TEST_OPTIONS=(
"NO_SHORT_LOOPS" "IGNORE_BRACES" "IGNORE_CLOSE_BRACES"
"SH_GLOB" "CSH_JUNKIE_QUOTES" "NO_MULTI_FUNC_DEF"
)
(
builtin emulate -LR ksh ${=${options[xtrace]:#off}:+-o xtrace}
builtin unsetopt shglob kshglob
for i in "${ZINIT_STRESS_TEST_OPTIONS[@]}"; do
builtin setopt "$i"
builtin print -n "Stress-testing ${fname:t} for option $i "
zcompile -UR "$fname" 2>/dev/null && {
builtin print "[${ZINIT[col-success]}Success${ZINIT[col-rst]}]"
} || {
builtin print "[${ZINIT[col-failure]}Fail${ZINIT[col-rst]}]"
}
builtin unsetopt "$i"
done
)
command rm -f "${fname}.zwc"
(( compiled )) && zcompile -U "$fname"
} # ]]]
# FUNCTION: .zinit-list-compdef-replay [[[
# Shows recorded compdefs (called by plugins loaded earlier).
# Plugins often call `compdef' hoping for `compinit' being
# already ran. Zinit solves this by recording compdefs.
#
# User-action entry point.
.zinit-list-compdef-replay() {
builtin print "Recorded compdefs:"
local cdf
for cdf in "${ZINIT_COMPDEF_REPLAY[@]}"; do
builtin print "compdef ${(Q)cdf}"
done
} # ]]]
# FUNCTION: .zinit-ls [[[
.zinit-ls() {
(( ${+commands[tree]} )) || {
builtin print "${ZINIT[col-error]}No \`tree' program, it is required by the subcommand \`ls\'${ZINIT[col-rst]}"
builtin print "Download from: http://mama.indstate.edu/users/ice/tree/"
builtin print "It is also available probably in all distributions and Homebrew, as package \`tree'"
}
(
setopt localoptions extendedglob nokshglob noksharrays
builtin cd -q "${ZINIT[SNIPPETS_DIR]}"
local -a list
local -x LANG=en_US.utf-8
list=( "${(f@)"$(${=ZINIT[LIST_COMMAND]})"}" )
# Oh-My-Zsh single file
list=( "${list[@]//(#b)(https--github.com--(ohmyzsh|robbyrussel)l--oh-my-zsh--raw--master(--)(#c0,1)(*))/$ZINIT[col-info]Oh-My-Zsh$ZINIT[col-error]${match[2]/--//}$ZINIT[col-pname]${match[3]//--/$ZINIT[col-error]/$ZINIT[col-pname]} $ZINIT[col-info](single-file)$ZINIT[col-rst] ${match[1]}}" )
# Oh-My-Zsh SVN
list=( "${list[@]//(#b)(https--github.com--(ohmyzsh|robbyrussel)l--oh-my-zsh--trunk(--)(#c0,1)(*))/$ZINIT[col-info]Oh-My-Zsh$ZINIT[col-error]${match[2]/--//}$ZINIT[col-pname]${match[3]//--/$ZINIT[col-error]/$ZINIT[col-pname]} $ZINIT[col-info](SVN)$ZINIT[col-rst] ${match[1]}}" )
# Prezto single file
list=( "${list[@]//(#b)(https--github.com--sorin-ionescu--prezto--raw--master(--)(#c0,1)(*))/$ZINIT[col-info]Prezto$ZINIT[col-error]${match[2]/--//}$ZINIT[col-pname]${match[3]//--/$ZINIT[col-error]/$ZINIT[col-pname]} $ZINIT[col-info](single-file)$ZINIT[col-rst] ${match[1]}}" )
# Prezto SVN
list=( "${list[@]//(#b)(https--github.com--sorin-ionescu--prezto--trunk(--)(#c0,1)(*))/$ZINIT[col-info]Prezto$ZINIT[col-error]${match[2]/--//}$ZINIT[col-pname]${match[3]//--/$ZINIT[col-error]/$ZINIT[col-pname]} $ZINIT[col-info](SVN)$ZINIT[col-rst] ${match[1]}}" )
# First-level names
list=( "${list[@]//(#b)(#s)(│ └──| └──| ├──|│ ├──) (*)/${match[1]} $ZINIT[col-p]${match[2]}$ZINIT[col-rst]}" )
list[-1]+=", located at ZINIT[SNIPPETS_DIR], i.e. ${ZINIT[SNIPPETS_DIR]}"
builtin print -rl -- "${list[@]}"
)
}
# ]]]
# FUNCTION: .zinit-get-path [[[
# Returns path of given ID-string, which may be a plugin-spec
# (like "user/plugin" or "user" "plugin"), an absolute path
# ("%" "/home/..." and also "%SNIPPETS/..." etc.), or a plugin
# nickname (i.e. id-as'' ice-mod), or a snippet nickname.
.zinit-get-path() {
builtin emulate -LR zsh ${=${options[xtrace]:#off}:+-o xtrace}
setopt extendedglob warncreateglobal typesetsilent noshortloops
[[ $1 == % ]] && local id_as=%$2 || local id_as=$1${1:+/}$2
.zinit-get-object-path snippet "$id_as" || \
.zinit-get-object-path plugin "$id_as"
return $(( 1 - reply[3] ))
}
# ]]]
# FUNCTION: .zinit-recall [[[
.zinit-recall() {
builtin emulate -LR zsh ${=${options[xtrace]:#off}:+-o xtrace}
setopt extendedglob warncreateglobal typesetsilent noshortloops
local -A ice
local el val cand1 cand2 local_dir filename is_snippet
local -a ice_order nval_ices output
ice_order=(
${(s.|.)ZINIT[ice-list]}
# Include all additional ices – after
# stripping them from the possible: ''
${(@)${(@Akons:|:u)${ZINIT_EXTS[ice-mods]//\'\'/}}/(#s)<->-/}
)
nval_ices=(
${(s.|.)ZINIT[nval-ice-list]}
# Include only those additional ices,
# don't have the '' in their name, i.e.
# aren't designed to hold value
${(@)${(@)${(@Akons:|:u)ZINIT_EXTS[ice-mods]}:#*\'\'*}/(#s)<->-/}
# Must be last
svn
)
.zinit-compute-ice "$1${${1:#(%|/)*}:+${2:+/}}$2" "pack" \
ice local_dir filename is_snippet || return 1
[[ -e $local_dir ]] && {
for el ( ${ice_order[@]} ) {
val="${ice[$el]}"
cand1="${(qqq)val}"
cand2="${(qq)val}"
if [[ -n "$val" ]] {
[[ "${cand1/\\\$/}" != "$cand1" || "${cand1/\\\!/}" != "$cand1" ]] && output+=( "$el$cand2" ) || output+=( "$el$cand1" )
} elif [[ ${+ice[$el]} = 1 && -n "${nval_ices[(r)$el]}" ]] {
output+=( "$el" )
}
}
if [[ ${#output} = 0 ]]; then
builtin print -zr "# No Ice modifiers"
else
builtin print -zr "zinit ice ${output[*]}; zinit "
fi
+zinit-deploy-message @rst
} || builtin print -r -- "No such plugin or snippet"
}
# ]]]
# FUNCTION: .zinit-module [[[
# Function that has sub-commands passed as long-options (with two dashes, --).
# It's an attempt to plugin only this one function into `zinit' function
# defined in zinit.zsh, to not make this file longer than it's needed.
.zinit-module() {
if [[ "$1" = "build" ]]; then
.zinit-build-module "${@[2,-1]}"
elif [[ "$1" = "info" ]]; then
if [[ "$2" = "--link" ]]; then
builtin print -r "You can copy the error messages and submit"
builtin print -r "error-report at: https://github.com/zdharma-continuum/zinit-module/issues"
else
builtin print -r "To load the module, add following 2 lines to .zshrc, at top:"
builtin print -r " module_path+=( \"${ZINIT[MODULE_DIR]}/Src\" )"
builtin print -r " zmodload zdharma_continuum/zinit"
builtin print -r ""
builtin print -r "After loading, use command \`zpmod' to communicate with the module."
builtin print -r "See \`zpmod -h' for more information."
fi
elif [[ "$1" = (help|usage) ]]; then
builtin print -r "Usage: zinit module {build|info|help} [options]"
builtin print -r " zinit module build [--clean]"
builtin print -r " zinit module info [--link]"
builtin print -r ""
builtin print -r "To start using the zinit Zsh module run: \`zinit module build'"
builtin print -r "and follow the instructions. Option --clean causes \`make distclean'"
builtin print -r "to be run. To display the instructions on loading the module, run:"
builtin print -r "\`zinit module info'."
fi
}
# ]]]
# FUNCTION: .zinit-build-module [[[
# Performs ./configure && make on the module and displays information
# how to load the module in .zshrc.
.zinit-build-module() {
setopt localoptions localtraps
trap 'return 1' INT TERM
if command git -C "${ZINIT[MODULE_DIR]}" rev-parse 2>/dev/null; then
command git -C "${ZINIT[MODULE_DIR]}" clean -d -f -f
command git -C "${ZINIT[MODULE_DIR]}" reset --hard HEAD
command git -C "${ZINIT[MODULE_DIR]}" pull
else
command git clone "https://github.com/zdharma-continuum/zinit-module.git" "${ZINIT[MODULE_DIR]}" || {
builtin print "${ZINIT[col-error]}Failed to clone module repo${ZINIT[col-rst]}"
return 1
}
fi
( builtin cd -q "${ZINIT[MODULE_DIR]}"
+zinit-message "{pname}== Building module zdharma-continuum/zinit-module, running: make clean, then ./configure and then make =={rst}"
+zinit-message "{pname}== The module sources are located at: "${ZINIT[MODULE_DIR]}" =={rst}"
if [[ -f Makefile ]] {
if [[ "$1" = "--clean" ]] {
noglob +zinit-message {p}-- make distclean --{rst}
make distclean
((1))
} else {
noglob +zinit-message {p}-- make clean --{rst}
make clean
}
}
noglob +zinit-message {p}-- ./configure --{rst}
CPPFLAGS=-I/usr/local/include CFLAGS="-g -Wall -O3" LDFLAGS=-L/usr/local/lib ./configure --disable-gdbm --without-tcsetpgrp && {
noglob +zinit-message {p}-- make --{rst}
if { make } {
[[ -f Src/zdharma_continuum/zinit.so ]] && cp -vf Src/zdharma_continuum/zinit.{so,bundle}
noglob +zinit-message "{info}Module has been built correctly.{rst}"
.zinit-module info
} else {
noglob +zinit-message "{error}Module didn't build.{rst} "
.zinit-module info --link
}
}
builtin print $EPOCHSECONDS >! "${ZINIT[MAN_DIR]}/COMPILED_AT"
)
}
# ]]]
#
# Help function
#
# FUNCTION: .zinit-help [[[
# Shows usage information.
#
# User-action entry point.
.zinit-help() {
builtin print -r -- "${ZINIT[col-p]}Usage${ZINIT[col-rst]}:
—— -h|--help|help – usage information
—— man – manual
—— self-update – updates and compiles Zinit
—— zstatus – overall Zinit statu—— times [-s] [-m] [-a] – statistics on plugin load times, sorted in order of loading; -s – use seconds instead of milliseconds, -m – show plugin loading moments, -a – show both load times and loading moments
—— load ${ZINIT[col-pname]}plg-spec${ZINIT[col-rst]} – load plugin, can also receive absolute local path
—— light [-b] ${ZINIT[col-pname]}plg-spec${ZINIT[col-rst]} – light plugin load, without reporting/tracking (-b – do track but bindkey-calls only)
—— unload ${ZINIT[col-pname]}plg-spec${ZINIT[col-rst]} – unload plugin loaded with \`zinit load ...', -q – quiet
—— snippet [-f] ${ZINIT[col-pname]}{url}${ZINIT[col-rst]} – source local or remote file (by direct URL), -f: force – don't use cache
—— ls – list snippets in formatted and colorized manner
—— ice <ice specification> – add ICE to next command, argument is e.g. from\"gitlab\"
—— update [-q] ${ZINIT[col-pname]}plg-spec${ZINIT[col-rst]}|URL – Git update plugin or snippet (or all plugins and snippets if ——all passed); besides -q accepts also ——quiet, and also -r/--reset – this option causes to run git reset --hard / svn revert before pulling changes
—— status ${ZINIT[col-pname]}plg-spec${ZINIT[col-rst]}|URL – Git status for plugin or svn status for snippet (or for all those if ——all passed)
—— report ${ZINIT[col-pname]}plg-spec${ZINIT[col-rst]} – show plugin's report (or all plugins' if ——all passed)
—— delete [--all|--clean] ${ZINIT[col-pname]}plg-spec${ZINIT[col-rst]}|URL – remove plugin or snippet from disk (good to forget wrongly passed ice-mods); --all – purge, --clean – delete plugins and snippets that are not loaded
—— loaded|list {keyword} – show what plugins are loaded (filter with \'keyword')
—— cd ${ZINIT[col-pname]}plg-spec${ZINIT[col-rst]} – cd into plugin's directory; also support snippets, if feed with URL
—— create ${ZINIT[col-pname]}plg-spec${ZINIT[col-rst]} – create plugin (also together with Github repository)
—— edit ${ZINIT[col-pname]}plg-spec${ZINIT[col-rst]} – edit plugin's file with \$EDITOR
—— glance ${ZINIT[col-pname]}plg-spec${ZINIT[col-rst]} – look at plugin's source (pygmentize, {,source-}highlight)
—— stress ${ZINIT[col-pname]}plg-spec${ZINIT[col-rst]} – test plugin for compatibility with set of options
—— changes ${ZINIT[col-pname]}plg-spec${ZINIT[col-rst]} – view plugin's git log
—— recently ${ZINIT[col-info]}[time-spec]${ZINIT[col-rst]} – show plugins that changed recently, argument is e.g. 1 month 2 days
—— clist|completions – list completions in use
—— cdisable ${ZINIT[col-info]}cname${ZINIT[col-rst]} – disable completion \`cname'
—— cenable ${ZINIT[col-info]}cname${ZINIT[col-rst]} – enable completion \`cname'
—— creinstall ${ZINIT[col-pname]}plg-spec${ZINIT[col-rst]} – install completions for plugin, can also receive absolute local path; -q – quiet
—— cuninstall ${ZINIT[col-pname]}plg-spec${ZINIT[col-rst]} – uninstall completions for plugin
—— csearch – search for available completions from any plugin
—— compinit – refresh installed completions
—— dtrace|dstart – start tracking what's going on in session
—— dstop – stop tracking what's going on in session
—— dunload – revert changes recorded between dstart and dstop
—— dreport – report what was going on in session
—— dclear – clear report of what was going on in session
—— compile ${ZINIT[col-pname]}plg-spec${ZINIT[col-rst]} – compile plugin (or all plugins if ——all passed)
—— uncompile ${ZINIT[col-pname]}plg-spec${ZINIT[col-rst]} – remove compiled version of plugin (or of all plugins if ——all passed)
—— compiled – list plugins that are compiled
—— cdlist – show compdef replay list
—— cdreplay [-q] – replay compdefs (to be done after compinit), -q – quiet
—— cdclear [-q] – clear compdef replay list, -q – quiet
—— srv {service-id} [cmd] – control a service, command can be: stop,start,restart,next,quit; \`next' moves the service to another Zshell
—— recall ${ZINIT[col-pname]}plg-spec${ZINIT[col-rst]}|URL – fetch saved ice modifiers and construct \`zinit ice ...' command
—— env-whitelist [-v|-h] {env..} – allows to specify names (also patterns) of variables left unchanged during an unload. -v – verbose
—— bindkeys – lists bindkeys set up by each plugin
—— module – manage binary Zsh module shipped with Zinit, see \`zinit module help'
—— add-fpath|fpath ${ZINIT[col-info]}[-f|--front]${ZINIT[col-rst]} \\
${ZINIT[col-pname]}plg-spec ${ZINIT[col-info]}[subdirectory]${ZINIT[col-rst]} – adds given plugin directory to \$fpath; if the second argument is given, it is appended to the directory path; if the option -f/--front is given, the directory path is prepended instead of appended to \$fpath. The ${ZINIT[col-pname]}plg-spec${ZINIT[col-rst]} can be absolute path
—— run [-l] [plugin] {command} – runs the given command in the given plugin's directory; if the option -l will be given then the plugin should be skipped – the option will cause the previous plugin to be reused"
integer idx
local type key
local -a arr
for type in subcommand hook; do
for (( idx=1; idx <= ZINIT_EXTS[seqno]; ++ idx )); do
key="${(k)ZINIT_EXTS[(r)$idx *]}"
[[ -z "$key" || "$key" != "z-annex $type:"* ]] && continue
arr=( "${(Q)${(z@)ZINIT_EXTS[$key]}[@]}" )
(( ${+functions[${arr[6]}]} )) && { "${arr[6]}"; ((1)); } || \
{ builtin print -rl -- "(Couldn't find the help-handler \`${arr[6]}' of the z-annex \`${arr[3]}')"; }
done
done
local -a ice_order
ice_order=( ${${(s.|.)ZINIT[ice-list]}:#teleid} ${(@)${(@)${(@Akons:|:u)${ZINIT_EXTS[ice-mods]//\'\'/}}/(#s)<->-/}:#(.*|dynamic-unscope)} )
print -- "\nAvailable ice-modifiers:\n\n${ice_order[*]}"
} # ]]]
# vim:ft=zsh:sw=4:sts=4:et:foldmarker=[[[,]]]:foldmethod=marker
此处可能存在不合适展示的内容，页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容，可点击提交进行申诉，我们将尽快为您处理。
马建仓 AI 助手