################################################################
# This is a generated script based on design: design_1
#
# Though there are limitations about the generated script,
# the main purpose of this utility is to make learning
# IP Integrator Tcl commands easier.
################################################################

namespace eval _tcl {
proc get_script_folder {} {
   set script_path [file normalize [info script]]
   set script_folder [file dirname $script_path]
   return $script_folder
}
}
variable script_folder
set script_folder [_tcl::get_script_folder]

################################################################
# Check if script is running in correct Vivado version.
################################################################
set scripts_vivado_version 2017.3
set current_vivado_version [version -short]

if { [string first $scripts_vivado_version $current_vivado_version] == -1 } {
   puts ""
   catch {common::send_msg_id "BD_TCL-109" "ERROR" "This script was generated using Vivado <$scripts_vivado_version> and is being run in <$current_vivado_version> of Vivado. Please run the script in Vivado <$scripts_vivado_version> then open the design in Vivado <$current_vivado_version>. Upgrade the design by running \"Tools => Report => Report IP Status...\", then run write_bd_tcl to create an updated script."}

   return 1
}

################################################################
# START
################################################################

# To test this script, run the following commands from Vivado Tcl console:
# source design_1_script.tcl

# If there is no project opened, this script will create a
# project, but make sure you do not have an existing project
# <./myproj/project_1.xpr> in the current working folder.

set list_projs [get_projects -quiet]
if { $list_projs eq "" } {
   create_project project_1 myproj -part xc7a35ticsg324-1L
   set_property BOARD_PART digilentinc.com:arty:part0:1.1 [current_project]
}


# CHANGE DESIGN NAME HERE
variable design_name
set design_name design_1

# If you do not already have an existing IP Integrator design open,
# you can create a design using the following command:
#    create_bd_design $design_name

# Creating design if needed
set errMsg ""
set nRet 0

set cur_design [current_bd_design -quiet]
set list_cells [get_bd_cells -quiet]

if { ${design_name} eq "" } {
   # USE CASES:
   #    1) Design_name not set

   set errMsg "Please set the variable <design_name> to a non-empty value."
   set nRet 1

} elseif { ${cur_design} ne "" && ${list_cells} eq "" } {
   # USE CASES:
   #    2): Current design opened AND is empty AND names same.
   #    3): Current design opened AND is empty AND names diff; design_name NOT in project.
   #    4): Current design opened AND is empty AND names diff; design_name exists in project.

   if { $cur_design ne $design_name } {
      common::send_msg_id "BD_TCL-001" "INFO" "Changing value of <design_name> from <$design_name> to <$cur_design> since current design is empty."
      set design_name [get_property NAME $cur_design]
   }
   common::send_msg_id "BD_TCL-002" "INFO" "Constructing design in IPI design <$cur_design>..."

} elseif { ${cur_design} ne "" && $list_cells ne "" && $cur_design eq $design_name } {
   # USE CASES:
   #    5) Current design opened AND has components AND same names.

   set errMsg "Design <$design_name> already exists in your project, please set the variable <design_name> to another value."
   set nRet 1
} elseif { [get_files -quiet ${design_name}.bd] ne "" } {
   # USE CASES: 
   #    6) Current opened design, has components, but diff names, design_name exists in project.
   #    7) No opened design, design_name exists in project.

   set errMsg "Design <$design_name> already exists in your project, please set the variable <design_name> to another value."
   set nRet 2

} else {
   # USE CASES:
   #    8) No opened design, design_name not in project.
   #    9) Current opened design, has components, but diff names, design_name not in project.

   common::send_msg_id "BD_TCL-003" "INFO" "Currently there is no design <$design_name> in project, so creating one..."

   create_bd_design $design_name

   common::send_msg_id "BD_TCL-004" "INFO" "Making design <$design_name> as current_bd_design."
   current_bd_design $design_name

}

common::send_msg_id "BD_TCL-005" "INFO" "Currently the variable <design_name> is equal to \"$design_name\"."

if { $nRet != 0 } {
   catch {common::send_msg_id "BD_TCL-114" "ERROR" $errMsg}
   return $nRet
}

set bCheckIPsPassed 1
##################################################################
# CHECK IPs
##################################################################
set bCheckIPs 1
if { $bCheckIPs == 1 } {
   set list_check_ips "\ 
xilinx.com:ip:clk_wiz:5.4\
xilinx.com:ip:ila:6.2\
xilinx.com:ip:jtag_axi:1.2\
xilinx.com:hls:memcpy_test:1.0\
xilinx.com:ip:mig_7series:4.0\
xilinx.com:ip:vio:3.0\
xilinx.com:ip:xlconstant:1.1\
"

   set list_ips_missing ""
   common::send_msg_id "BD_TCL-006" "INFO" "Checking if the following IPs exist in the project's IP catalog: $list_check_ips ."

   foreach ip_vlnv $list_check_ips {
      set ip_obj [get_ipdefs -all $ip_vlnv]
      if { $ip_obj eq "" } {
         lappend list_ips_missing $ip_vlnv
      }
   }

   if { $list_ips_missing ne "" } {
      catch {common::send_msg_id "BD_TCL-115" "ERROR" "The following IPs are not found in the IP Catalog:\n  $list_ips_missing\n\nResolution: Please add the repository containing the IP(s) to the project." }
      set bCheckIPsPassed 0
   }

}

if { $bCheckIPsPassed != 1 } {
  common::send_msg_id "BD_TCL-1003" "WARNING" "Will not continue with creation of design due to the error(s) above."
  return 3
}


##################################################################
# MIG PRJ FILE TCL PROCs
##################################################################

proc write_mig_file_design_1_mig_7series_0_0 { str_mig_prj_filepath } {

   file mkdir [ file dirname "$str_mig_prj_filepath" ]
   set mig_prj_file [open $str_mig_prj_filepath  w+]

   puts $mig_prj_file {<?xml version='1.0' encoding='UTF-8'?>}
   puts $mig_prj_file {<!-- IMPORTANT: This is an internal file that has been generated by the MIG software. Any direct editing or changes made to this file may result in unpredictable behavior or data corruption. It is strongly advised that users do not edit the contents of this file. Re-run the MIG GUI with the required settings if any of the options provided below need to be altered. -->}
   puts $mig_prj_file {<Project NoOfControllers="1" >}
   puts $mig_prj_file {    <ModuleName>design_1_mig_7series_0_0</ModuleName>}
   puts $mig_prj_file {    <dci_inouts_inputs>1</dci_inouts_inputs>}
   puts $mig_prj_file {    <dci_inputs>1</dci_inputs>}
   puts $mig_prj_file {    <Debug_En>OFF</Debug_En>}
   puts $mig_prj_file {    <DataDepth_En>1024</DataDepth_En>}
   puts $mig_prj_file {    <LowPower_En>ON</LowPower_En>}
   puts $mig_prj_file {    <XADC_En>Enabled</XADC_En>}
   puts $mig_prj_file {    <TargetFPGA>xc7a35ti-csg324/-1L</TargetFPGA>}
   puts $mig_prj_file {    <Version>4.0</Version>}
   puts $mig_prj_file {    <SystemClock>No Buffer</SystemClock>}
   puts $mig_prj_file {    <ReferenceClock>No Buffer</ReferenceClock>}
   puts $mig_prj_file {    <SysResetPolarity>ACTIVE LOW</SysResetPolarity>}
   puts $mig_prj_file {    <BankSelectionFlag>FALSE</BankSelectionFlag>}
   puts $mig_prj_file {    <InternalVref>1</InternalVref>}
   puts $mig_prj_file {    <dci_hr_inouts_inputs>50 Ohms</dci_hr_inouts_inputs>}
   puts $mig_prj_file {    <dci_cascade>0</dci_cascade>}
   puts $mig_prj_file {    <Controller number="0" >}
   puts $mig_prj_file {        <MemoryDevice>DDR3_SDRAM/Components/MT41K128M16XX-15E</MemoryDevice>}
   puts $mig_prj_file {        <TimePeriod>3000</TimePeriod>}
   puts $mig_prj_file {        <VccAuxIO>1.8V</VccAuxIO>}
   puts $mig_prj_file {        <PHYRatio>4:1</PHYRatio>}
   puts $mig_prj_file {        <InputClkFreq>166.666</InputClkFreq>}
   puts $mig_prj_file {        <UIExtraClocks>0</UIExtraClocks>}
   puts $mig_prj_file {        <MMCM_VCO>666</MMCM_VCO>}
   puts $mig_prj_file {        <MMCMClkOut0> 1.000</MMCMClkOut0>}
   puts $mig_prj_file {        <MMCMClkOut1>1</MMCMClkOut1>}
   puts $mig_prj_file {        <MMCMClkOut2>1</MMCMClkOut2>}
   puts $mig_prj_file {        <MMCMClkOut3>1</MMCMClkOut3>}
   puts $mig_prj_file {        <MMCMClkOut4>1</MMCMClkOut4>}
   puts $mig_prj_file {        <DataWidth>16</DataWidth>}
   puts $mig_prj_file {        <DeepMemory>1</DeepMemory>}
   puts $mig_prj_file {        <DataMask>1</DataMask>}
   puts $mig_prj_file {        <ECC>Disabled</ECC>}
   puts $mig_prj_file {        <Ordering>Normal</Ordering>}
   puts $mig_prj_file {        <BankMachineCnt>4</BankMachineCnt>}
   puts $mig_prj_file {        <CustomPart>FALSE</CustomPart>}
   puts $mig_prj_file {        <NewPartName></NewPartName>}
   puts $mig_prj_file {        <RowAddress>14</RowAddress>}
   puts $mig_prj_file {        <ColAddress>10</ColAddress>}
   puts $mig_prj_file {        <BankAddress>3</BankAddress>}
   puts $mig_prj_file {        <MemoryVoltage>1.35V</MemoryVoltage>}
   puts $mig_prj_file {        <C0_MEM_SIZE>268435456</C0_MEM_SIZE>}
   puts $mig_prj_file {        <UserMemoryAddressMap>BANK_ROW_COLUMN</UserMemoryAddressMap>}
   puts $mig_prj_file {        <PinSelection>}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="R2" SLEW="" name="ddr3_addr[0]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="R6" SLEW="" name="ddr3_addr[10]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="U6" SLEW="" name="ddr3_addr[11]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="T6" SLEW="" name="ddr3_addr[12]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="T8" SLEW="" name="ddr3_addr[13]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="M6" SLEW="" name="ddr3_addr[1]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="N4" SLEW="" name="ddr3_addr[2]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="T1" SLEW="" name="ddr3_addr[3]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="N6" SLEW="" name="ddr3_addr[4]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="R7" SLEW="" name="ddr3_addr[5]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="V6" SLEW="" name="ddr3_addr[6]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="U7" SLEW="" name="ddr3_addr[7]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="R8" SLEW="" name="ddr3_addr[8]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="V7" SLEW="" name="ddr3_addr[9]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="R1" SLEW="" name="ddr3_ba[0]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="P4" SLEW="" name="ddr3_ba[1]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="P2" SLEW="" name="ddr3_ba[2]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="M4" SLEW="" name="ddr3_cas_n" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="DIFF_SSTL135" PADName="V9" SLEW="" name="ddr3_ck_n[0]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="DIFF_SSTL135" PADName="U9" SLEW="" name="ddr3_ck_p[0]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="N5" SLEW="" name="ddr3_cke[0]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="U8" SLEW="" name="ddr3_cs_n[0]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="L1" SLEW="" name="ddr3_dm[0]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="U1" SLEW="" name="ddr3_dm[1]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="K5" SLEW="" name="ddr3_dq[0]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="U4" SLEW="" name="ddr3_dq[10]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="V5" SLEW="" name="ddr3_dq[11]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="V1" SLEW="" name="ddr3_dq[12]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="T3" SLEW="" name="ddr3_dq[13]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="U3" SLEW="" name="ddr3_dq[14]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="R3" SLEW="" name="ddr3_dq[15]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="L3" SLEW="" name="ddr3_dq[1]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="K3" SLEW="" name="ddr3_dq[2]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="L6" SLEW="" name="ddr3_dq[3]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="M3" SLEW="" name="ddr3_dq[4]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="M1" SLEW="" name="ddr3_dq[5]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="L4" SLEW="" name="ddr3_dq[6]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="M2" SLEW="" name="ddr3_dq[7]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="V4" SLEW="" name="ddr3_dq[8]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="T5" SLEW="" name="ddr3_dq[9]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="DIFF_SSTL135" PADName="N1" SLEW="" name="ddr3_dqs_n[0]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="DIFF_SSTL135" PADName="V2" SLEW="" name="ddr3_dqs_n[1]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="DIFF_SSTL135" PADName="N2" SLEW="" name="ddr3_dqs_p[0]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="DIFF_SSTL135" PADName="U2" SLEW="" name="ddr3_dqs_p[1]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="R5" SLEW="" name="ddr3_odt[0]" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="P3" SLEW="" name="ddr3_ras_n" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="K6" SLEW="" name="ddr3_reset_n" IN_TERM="" />}
   puts $mig_prj_file {            <Pin VCCAUX_IO="" IOSTANDARD="SSTL135" PADName="P5" SLEW="" name="ddr3_we_n" IN_TERM="" />}
   puts $mig_prj_file {        </PinSelection>}
   puts $mig_prj_file {        <System_Control>}
   puts $mig_prj_file {            <Pin PADName="No connect" Bank="Select Bank" name="sys_rst" />}
   puts $mig_prj_file {            <Pin PADName="No connect" Bank="Select Bank" name="init_calib_complete" />}
   puts $mig_prj_file {            <Pin PADName="No connect" Bank="Select Bank" name="tg_compare_error" />}
   puts $mig_prj_file {        </System_Control>}
   puts $mig_prj_file {        <TimingParameters>}
   puts $mig_prj_file {            <Parameters twtr="7.5" trrd="7.5" trefi="7.8" tfaw="45" trtp="7.5" tcke="5.625" trfc="160" trp="13.5" tras="36" trcd="13.5" />}
   puts $mig_prj_file {        </TimingParameters>}
   puts $mig_prj_file {        <mrBurstLength name="Burst Length" >8 - Fixed</mrBurstLength>}
   puts $mig_prj_file {        <mrBurstType name="Read Burst Type and Length" >Sequential</mrBurstType>}
   puts $mig_prj_file {        <mrCasLatency name="CAS Latency" >5</mrCasLatency>}
   puts $mig_prj_file {        <mrMode name="Mode" >Normal</mrMode>}
   puts $mig_prj_file {        <mrDllReset name="DLL Reset" >No</mrDllReset>}
   puts $mig_prj_file {        <mrPdMode name="DLL control for precharge PD" >Slow Exit</mrPdMode>}
   puts $mig_prj_file {        <emrDllEnable name="DLL Enable" >Enable</emrDllEnable>}
   puts $mig_prj_file {        <emrOutputDriveStrength name="Output Driver Impedance Control" >RZQ/6</emrOutputDriveStrength>}
   puts $mig_prj_file {        <emrMirrorSelection name="Address Mirroring" >Disable</emrMirrorSelection>}
   puts $mig_prj_file {        <emrCSSelection name="Controller Chip Select Pin" >Enable</emrCSSelection>}
   puts $mig_prj_file {        <emrRTT name="RTT (nominal) - On Die Termination (ODT)" >RZQ/6</emrRTT>}
   puts $mig_prj_file {        <emrPosted name="Additive Latency (AL)" >0</emrPosted>}
   puts $mig_prj_file {        <emrOCD name="Write Leveling Enable" >Disabled</emrOCD>}
   puts $mig_prj_file {        <emrDQS name="TDQS enable" >Enabled</emrDQS>}
   puts $mig_prj_file {        <emrRDQS name="Qoff" >Output Buffer Enabled</emrRDQS>}
   puts $mig_prj_file {        <mr2PartialArraySelfRefresh name="Partial-Array Self Refresh" >Full Array</mr2PartialArraySelfRefresh>}
   puts $mig_prj_file {        <mr2CasWriteLatency name="CAS write latency" >5</mr2CasWriteLatency>}
   puts $mig_prj_file {        <mr2AutoSelfRefresh name="Auto Self Refresh" >Enabled</mr2AutoSelfRefresh>}
   puts $mig_prj_file {        <mr2SelfRefreshTempRange name="High Temparature Self Refresh Rate" >Normal</mr2SelfRefreshTempRange>}
   puts $mig_prj_file {        <mr2RTTWR name="RTT_WR - Dynamic On Die Termination (ODT)" >Dynamic ODT off</mr2RTTWR>}
   puts $mig_prj_file {        <PortInterface>AXI</PortInterface>}
   puts $mig_prj_file {        <AXIParameters>}
   puts $mig_prj_file {            <C0_C_RD_WR_ARB_ALGORITHM>RD_PRI_REG</C0_C_RD_WR_ARB_ALGORITHM>}
   puts $mig_prj_file {            <C0_S_AXI_ADDR_WIDTH>28</C0_S_AXI_ADDR_WIDTH>}
   puts $mig_prj_file {            <C0_S_AXI_DATA_WIDTH>32</C0_S_AXI_DATA_WIDTH>}
   puts $mig_prj_file {            <C0_S_AXI_ID_WIDTH>2</C0_S_AXI_ID_WIDTH>}
   puts $mig_prj_file {            <C0_S_AXI_SUPPORTS_NARROW_BURST>0</C0_S_AXI_SUPPORTS_NARROW_BURST>}
   puts $mig_prj_file {        </AXIParameters>}
   puts $mig_prj_file {    </Controller>}
   puts $mig_prj_file {</Project>}

   close $mig_prj_file
}
# End of write_mig_file_design_1_mig_7series_0_0()



##################################################################
# DESIGN PROCs
##################################################################



# Procedure to create entire design; Provide argument to make
# procedure reusable. If parentCell is "", will use root.
proc create_root_design { parentCell } {

  variable script_folder
  variable design_name

  if { $parentCell eq "" } {
     set parentCell [get_bd_cells /]
  }

  # Get object for parentCell
  set parentObj [get_bd_cells $parentCell]
  if { $parentObj == "" } {
     catch {common::send_msg_id "BD_TCL-100" "ERROR" "Unable to find parent cell <$parentCell>!"}
     return
  }

  # Make sure parentObj is hier blk
  set parentType [get_property TYPE $parentObj]
  if { $parentType ne "hier" } {
     catch {common::send_msg_id "BD_TCL-101" "ERROR" "Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."}
     return
  }

  # Save current instance; Restore later
  set oldCurInst [current_bd_instance .]

  # Set parent object as current
  current_bd_instance $parentObj


  # Create interface ports
  set ddr3_sdram_0 [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:ddrx_rtl:1.0 ddr3_sdram_0 ]

  # Create ports
  set sys_clock [ create_bd_port -dir I -type clk sys_clock ]
  set_property -dict [ list \
   CONFIG.FREQ_HZ {100000000} \
   CONFIG.PHASE {0.000} \
 ] $sys_clock

  # Create instance: axi_interconnect_0, and set properties
  set axi_interconnect_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_interconnect:2.1 axi_interconnect_0 ]
  set_property -dict [ list \
   CONFIG.NUM_MI {1} \
   CONFIG.NUM_SI {2} \
 ] $axi_interconnect_0

  # Create instance: clk_wiz_0, and set properties
  set clk_wiz_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:clk_wiz:5.4 clk_wiz_0 ]
  set_property -dict [ list \
   CONFIG.CLKOUT1_JITTER {118.758} \
   CONFIG.CLKOUT1_REQUESTED_OUT_FREQ {166.666} \
   CONFIG.CLKOUT2_JITTER {114.829} \
   CONFIG.CLKOUT2_PHASE_ERROR {98.575} \
   CONFIG.CLKOUT2_REQUESTED_OUT_FREQ {200.000} \
   CONFIG.CLKOUT2_USED {true} \
   CONFIG.CLK_IN1_BOARD_INTERFACE {sys_clock} \
   CONFIG.MMCM_CLKIN1_PERIOD {10.000} \
   CONFIG.MMCM_CLKIN2_PERIOD {10.000} \
   CONFIG.MMCM_CLKOUT0_DIVIDE_F {6.000} \
   CONFIG.MMCM_CLKOUT1_DIVIDE {5} \
   CONFIG.MMCM_DIVCLK_DIVIDE {1} \
   CONFIG.NUM_OUT_CLKS {2} \
   CONFIG.USE_BOARD_FLOW {true} \
   CONFIG.USE_RESET {false} \
 ] $clk_wiz_0

  # Create instance: ila_0, and set properties
  set ila_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:ila:6.2 ila_0 ]
  set_property -dict [ list \
   CONFIG.C_ENABLE_ILA_AXI_MON {true} \
   CONFIG.C_MONITOR_TYPE {AXI} \
   CONFIG.C_NUM_OF_PROBES {44} \
 ] $ila_0

  # Create instance: ila_1, and set properties
  set ila_1 [ create_bd_cell -type ip -vlnv xilinx.com:ip:ila:6.2 ila_1 ]
  set_property -dict [ list \
   CONFIG.C_ENABLE_ILA_AXI_MON {false} \
   CONFIG.C_MONITOR_TYPE {Native} \
   CONFIG.C_NUM_OF_PROBES {8} \
   CONFIG.C_PROBE3_WIDTH {1} \
   CONFIG.C_PROBE5_WIDTH {32} \
 ] $ila_1

  # Create instance: jtag_axi_0, and set properties
  set jtag_axi_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:jtag_axi:1.2 jtag_axi_0 ]

  # Create instance: memcpy_test_0, and set properties
  set memcpy_test_0 [ create_bd_cell -type ip -vlnv xilinx.com:hls:memcpy_test:1.0 memcpy_test_0 ]
  set_property -dict [ list \
   CONFIG.C_M_AXI_GMEM_DATA_WIDTH {32} \
   CONFIG.C_M_AXI_GMEM_ENABLE_ID_PORTS {true} \
   CONFIG.C_M_AXI_GMEM_ENABLE_USER_PORTS {true} \
 ] $memcpy_test_0

  # Create instance: mig_7series_0, and set properties
  set mig_7series_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:mig_7series:4.0 mig_7series_0 ]

  # Generate the PRJ File for MIG
  set str_mig_folder [get_property IP_DIR [ get_ips [ get_property CONFIG.Component_Name $mig_7series_0 ] ] ]
  set str_mig_file_name mig_a.prj
  set str_mig_file_path ${str_mig_folder}/${str_mig_file_name}

  write_mig_file_design_1_mig_7series_0_0 $str_mig_file_path

  set_property -dict [ list \
   CONFIG.BOARD_MIG_PARAM {ddr3_sdram} \
   CONFIG.RESET_BOARD_INTERFACE {Custom} \
   CONFIG.XML_INPUT_FILE {mig_a.prj} \
 ] $mig_7series_0

  # Create instance: vio_0, and set properties
  set vio_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:vio:3.0 vio_0 ]

  # Create instance: vio_1, and set properties
  set vio_1 [ create_bd_cell -type ip -vlnv xilinx.com:ip:vio:3.0 vio_1 ]

  # Create instance: xlconstant_0, and set properties
  set xlconstant_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlconstant:1.1 xlconstant_0 ]

  # Create instance: xlconstant_1, and set properties
  set xlconstant_1 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlconstant:1.1 xlconstant_1 ]
  set_property -dict [ list \
   CONFIG.CONST_VAL {0x80000000} \
   CONFIG.CONST_WIDTH {32} \
 ] $xlconstant_1

  # Create interface connections
  connect_bd_intf_net -intf_net S00_AXI_1 [get_bd_intf_pins axi_interconnect_0/S00_AXI] [get_bd_intf_pins memcpy_test_0/m_axi_gmem]
connect_bd_intf_net -intf_net [get_bd_intf_nets S00_AXI_1] [get_bd_intf_pins axi_interconnect_0/S00_AXI] [get_bd_intf_pins ila_0/SLOT_0_AXI]
  connect_bd_intf_net -intf_net axi_interconnect_0_M00_AXI [get_bd_intf_pins axi_interconnect_0/M00_AXI] [get_bd_intf_pins mig_7series_0/S_AXI]
  connect_bd_intf_net -intf_net jtag_axi_0_M_AXI [get_bd_intf_pins axi_interconnect_0/S01_AXI] [get_bd_intf_pins jtag_axi_0/M_AXI]
  connect_bd_intf_net -intf_net mig_7series_0_DDR3 [get_bd_intf_ports ddr3_sdram_0] [get_bd_intf_pins mig_7series_0/DDR3]

  # Create port connections
  connect_bd_net -net clk_wiz_0_clk_out1 [get_bd_pins clk_wiz_0/clk_out1] [get_bd_pins mig_7series_0/clk_ref_i]
  connect_bd_net -net clk_wiz_0_clk_out2 [get_bd_pins clk_wiz_0/clk_out2] [get_bd_pins mig_7series_0/sys_clk_i]
  connect_bd_net -net clk_wiz_0_locked [get_bd_pins axi_interconnect_0/ARESETN] [get_bd_pins axi_interconnect_0/M00_ARESETN] [get_bd_pins axi_interconnect_0/S00_ARESETN] [get_bd_pins axi_interconnect_0/S01_ARESETN] [get_bd_pins clk_wiz_0/locked] [get_bd_pins ila_1/probe3] [get_bd_pins jtag_axi_0/aresetn] [get_bd_pins mig_7series_0/aresetn] [get_bd_pins mig_7series_0/sys_rst] [get_bd_pins vio_1/probe_in0]
  connect_bd_net -net memcpy_test_0_ap_done [get_bd_pins ila_1/probe0] [get_bd_pins memcpy_test_0/ap_done]
  connect_bd_net -net memcpy_test_0_ap_idle [get_bd_pins ila_1/probe1] [get_bd_pins memcpy_test_0/ap_idle]
  connect_bd_net -net memcpy_test_0_ap_ready [get_bd_pins ila_1/probe2] [get_bd_pins memcpy_test_0/ap_ready]
  connect_bd_net -net mig_7series_0_init_calib_complete [get_bd_pins ila_1/probe7] [get_bd_pins mig_7series_0/init_calib_complete]
  connect_bd_net -net mig_7series_0_mmcm_locked [get_bd_pins ila_1/probe6] [get_bd_pins mig_7series_0/mmcm_locked]
  connect_bd_net -net mig_7series_0_ui_clk [get_bd_pins axi_interconnect_0/ACLK] [get_bd_pins axi_interconnect_0/M00_ACLK] [get_bd_pins axi_interconnect_0/S00_ACLK] [get_bd_pins axi_interconnect_0/S01_ACLK] [get_bd_pins ila_0/clk] [get_bd_pins ila_1/clk] [get_bd_pins jtag_axi_0/aclk] [get_bd_pins memcpy_test_0/ap_clk] [get_bd_pins mig_7series_0/ui_clk] [get_bd_pins vio_0/clk] [get_bd_pins vio_1/clk]
  connect_bd_net -net sys_clock_1 [get_bd_ports sys_clock] [get_bd_pins clk_wiz_0/clk_in1]
  connect_bd_net -net vio_0_probe_out0 [get_bd_pins ila_1/probe4] [get_bd_pins memcpy_test_0/ap_start] [get_bd_pins vio_0/probe_out0]
  connect_bd_net -net vio_1_probe_out0 [get_bd_pins memcpy_test_0/ap_rst_n] [get_bd_pins vio_1/probe_out0]
  connect_bd_net -net xlconstant_0_dout [get_bd_pins vio_0/probe_in0] [get_bd_pins xlconstant_0/dout]
  connect_bd_net -net xlconstant_1_dout [get_bd_pins ila_1/probe5] [get_bd_pins memcpy_test_0/ddr] [get_bd_pins xlconstant_1/dout]

  # Create address segments
  create_bd_addr_seg -range 0x10000000 -offset 0x80000000 [get_bd_addr_spaces jtag_axi_0/Data] [get_bd_addr_segs mig_7series_0/memmap/memaddr] SEG_mig_7series_0_memaddr
  create_bd_addr_seg -range 0x10000000 -offset 0x80000000 [get_bd_addr_spaces memcpy_test_0/Data_m_axi_gmem] [get_bd_addr_segs mig_7series_0/memmap/memaddr] SEG_mig_7series_0_memaddr


  # Restore current instance
  current_bd_instance $oldCurInst

  save_bd_design
}
# End of create_root_design()


##################################################################
# MAIN FLOW
##################################################################

create_root_design ""